Abstract
The aim for the progress of fiber spinning technology is to analyze the phenomena occurring in the industrial fiber-producing processes and seek the way to produce fibers which would fulfill the required properties. Fiber formation behavior needs to be investigated through two different approaches, i.e., theoretical analysis of the spin-line dynamics and in situ measurement of the spin-line. Regarding theoretical analysis, after the introduction of the fundamentals of spin-line dynamics, various approaches for analyzing the spin-line behavior including the melt spinning of noncircular cross-section fibers, non-steady-state spinning, higher-order structure development, and the control of the state of molecular entanglement are discussed. Regarding the in situ measurement, analyses on the structure development behavior in the spin-line through the measurements of molecular orientation and crystallization are emphasized. In addition, detailed necklike deformation behavior occurring in the high-speed melt spinning process is discussed. Lastly, recent development of various distinctive fiber spinning technologies such as the utilization of low-temperature extrusion, mimicking of the bio-spinning process applying microchip technology, fabrication of fibers with various cross-sectional configurations, and structure control through multicomponent melt spinning process are introduced.
Note: Main part of this article is based on the review published in Sen’i Gakkaishi.[79]
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
H. Maeda, K. Kanamaru, Sen’i. Gakkaishi. 19, 230–242 (1963)
A. Takizawa, S. Ueda, Sen’i. Gakkaishi. 19(11), S35–S41 (1963)
S. Ueda, Sen’i. Gakkaishi. 21(5), S105–S106 (1965)
A. Ziabicki, Fundamentals of fiber formation (Wiley, London, 1976)
O. Ishizuka, Sen’i. Gakkaishi. 30(3), P-172–P-177 (1974)
J. Shimizu, Sen’i. Gakkaishi. 40(4–5), P-173–P-179 (1984)
H. Yamada, Sen’i. Gakkaishi. 45(12), P-529–P-534 (1984)
J. Shimizu, Sen’i. Gakkaishi. 50(6), P-229–P-234 (1994)
M. Matsui, Sen’i. Gakkaishi. 60(6), P-166–P-171 (1994)
H. Ito, Seikei. Kakou. 16(7), 414–419 (2004)
H. Ito, Seikei. Kakou. 17(7), 437–443 (2005)
K. Miyata, Seikei. Kakou. 18(7), 460–463 (2006)
K. Miyata, Seikei. Kakou. 19(7), 403–405 (2007)
K. Kim, Y. Ohkoshi, Seikei. Kakou. 20(7), 395–399 (2008)
K. Kim, Y. Ohkoshi, Seikei. Kakou. 21(7), 376–380 (2009)
W. Takarada, Seikei. Kakou. 22(7), 333–338 (2010)
W. Takarada, Seikei. Kakou. 23(7), 387–392 (2011)
M. Takasaki, Seikei. Kakou. 24(7), 360–363 (2012)
M. Takasaki, Seikei. Kakou. 25(7), 302–305 (2013)
T. Kikutani, Seikei. Kakou. 20(8), 509–513 (2008)
M. Fukuhara, Research report on technological systematization (Gizyutsu no Taikeika). Natl. Mus. Nature. Sci. 7, 123–178 (2007)
J. Shimizu, T. Kikutani, J. Appl. Polym. Sci. 83, 539–558 (2002)
T. Kikutani, Sen’i. Gakkaishi. 63(12), P-417–P-422 (2007)
A. Ziabicki, H. Kawai (eds.), High-Speed Fiber Spinning (Wiley-Interscience, New York, 1985)
T. Nakajima (ed.), Advanced Fiber Spinning Technology (Woodhead Publishing Lmited, Cambridge, 1994)
D.R. Salem (ed.), Structure Formation in Polymeric Fibers (Hanser, Munich, 2000)
T. Kikutani, in Handbook of Textile Fibre Structure, Vol. 1: Fundamentals and Manufactured Polymer Fibres, ed. by S.J. Eichhorn, J.W.S. Hearle, M. Jaffe, T. Kikutani (Woodhead publishing, Cambridge, 2009), pp. 157–180
R. Beyreuther, H. Brunig, Dynamics of Fiber Formation and Processing (Springer, Berlin, 2010)
S. Kase, T. Matsuo, J. Polym. Sci. Part A 3, 2541–2554 (1965)
S. Kase, T. Matsuo, Sen-i. Kikai. Gakkaishi. (J. Text. Mach. Soc. Jpn.) 18, 188 (1965)
W. Takarada, H. Ito, T. Kikutani, N. Okui, J. Appl. Polym. Sci. 80, 1575–1581 (2001); 80, 1581–1588 (2001); 80, 1589–11600 (2001)
J. Zhou, J. Li, W. Yu, X. Lin, X. Zhou, Polym. Eng. Sci. 50(10), 1935–1944 (2010)
K. Ikeda, M. Shibaya, H. Ishihara, Seikei. Kakou. 17(12), 849–854 (2005)
H. Ishihara, M. Shibaya, K. Ikeda, Seikei. Kakou. 17(3), 204–212 (2005)
T. Enya, H. Ito, T. Kikutani, Fiber Society Annual Meeting (University of California, Davis, 2007)
W. Takarada, K. Kazama, H. Ito, T. Kikutani, Intern. Polym. Process. 19(4), 380–387 (2004)
K. Katayama, M. Yoon, Sen’i. Gakkaishi. 38(9), P-434–P441 (1982)
T. Kikutani, PhD Thesis (Tokyo Institute of Technology) 1982
A.K. Doufas, A.J. McHugh, C. Miller, J. Non-Newtonian Fluid Mech. 92, 27–66 (2000)
J. Shimizu, N. Okui, T. Kikutani, in High-Speed Fiber Spinning, ed. by A. Ziabicki, H. Kawai (Wiley, New York, 1985), pp. 173–201
OCTA Home Page. http://octa.jp/
M. Masuda, W. Takarada, T. Kikutani, Intern. Polym. Process. 25(2), 159–169 (2010)
Y. Masubuchi, in Fundamental and Practical Technologies for Nano-structured Polymeric Materials, ed. by S. Nakahama (CMC Shuppan, 2008), Tokyo, pp. 66–74
K. Takahashi, T. Taniguchi, Seikei. Kakou. 13, 102 (2013)
T. Ishikawa, T. Aoyagi, K. Toyoda, J. Kojima, W. Takarada, T. Kikutani, 14th Symposium on Computational Science on Polymers, 13 March 2014
K. Katayama, in Sen-i no Keisei to Kozo no Hatsugen (Formation and Structure Development of Fibers), ed. by Sen’i Gakkai (Kagaku-Dojin, 1969), Tokyo, pp. 159–176
O. Ishizuka, K. Koyama, Polymer 18, 913–918 (1977)
R. Kolb, S. Seifert, N. Stribeck, H.G. Zachmann, Polymer 41, 1497–1505 (2000)
V.G. Bankar, J.E. Spruiell, J.L. White, J. Appl, Polym. Sci. 21, 2341–2358 (1977)
H. Haberkorn, K. Hahn, H. Breuer, H.-D. Dorrer, P. Matthies, J. Appl. Polym. Sci. 47, 1551–1579 (1993)
H. Hirahata, S. Seifert, H.G. Zachmann, K. Yabuki, Polymer 37, 5131–5137 (1996)
H. Nishimura, M. Sei, K. Chizuka, M. Masuda, H. Yamazaki, J. Kojima, K. Yamamoto, S. Okamoto, K. Nakamae, K. Kotera, T. Kikutani, S. Sakurai, Zairyo 62(1), 8–12 (2013)
K.H. Kim, T. Yamaguchi, Y. Ohkoshi, Y. Gotoh, M. Nagura, H. Urakawa, M. Kotera, T. Kikutani, J. Polym. Sci. Pt-B. Polym. Phys. 47, 1653–1665 (2009)
T. Kikutani, Seikei. Kakou. 5(12), 831–838 (1993)
T. Kikutani, T. Matsui, A. Takaku, J. Shimizu, Sen’i. Gakkaishi. 45(11), 441–446 (1989)
T. Kikutani, Y. Kawahara, N. Ogawa, N. Okui, Sen’i. Gakkaishi. 50(12), 561–566 (1994)
W.-G. Hahm, H. Ito, T. Kikutani, Intern. Polym. Process 21, 536–553 (2006)
T. Kikutani, K. Nakao, W. Takarada, H. Ito, Polym. Eng. Sci. 39(12), 2349–2357 (1999)
W.-G. Hahm, W. Takarada, H. Ito, T. Kikutani, Intern. Polym. Process. 24, 281–287 (2009)
K. Fukutome, H. Ito, T. Kikutani, Fiber Preprints, Japan, (2001) p. 89
H. Murase, Y. Ohta, T. Hashimoto, Macromolecules 44, 7335–7350 (2011)
J. Cao, J. Appl, Polym. Sci. 102, 3078–3082 (2006)
K.L. Alderson, A. Alderson, G. Smart, V.R. Simkins, P.J. Davies, Plast. Rubber. Composties. 31(8), 344–349 (2002)
Y. Shirakashi, O. Asakura, S. Ito, J. Ishibashi, X. Xu, W. Ttakarada, T. Kikutani, Seikei. Kakou. 23(6), 358–364 (2011)
X. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani, Text. Res. J. 82(13), 1382–1389 (2012)
X. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani, Text. Res. J. 83(19), 2042–2050 (2013)
J. Sugawara, Fiber Preprints, Japan, pp.15–18 (2014); http://www.spiber.jp/
Jie Luo, Yaopeng Zhang∗, Yan Huang, Huili Shao, Xuechao Hu, Sensors and Actuators, B162, 435–440 (2012)
B. Renberga, H. Andersson-Svahna, My Hedhammarb. Sensors Actuators B195, 404–408 (2014)
O.S. Galaktinov, P.D. Anderson, G.W. Peters, H.E.H. Meijer, Intern. Polym. Process. 18, 138–150 (2003)
T.H. Oh, Intern. Polym. Process. 21, 374–378 (2006)
S.-C. Tseng, C.-T. Shi, Intern. Polym. Process. 23, 277–285 (2008)
M. Kamiyama, T. Soeda, S. Nagajima, K. Tanaka, Polym. J. 44, 987–994 (2012)
Hills, Inc., USP 7,252,493 (2007)
T. Kikutani, J. Radhakrishnan, S. Arikawa, A. Takaku, N. Okui, X. Jin, F. Niwa, Y. Kudo, J. Appl, Polym. Sci. 62, 1913–1924 (1996)
T. Kikutani, H. Ito, Sen-i. Kikai. Gakkaishi. (J. Text. Mach. Soc. Jpn.) 55(5), 38–44 (2002)
T. Kikutani, Sen’i. Gakkaishi. 70(9), P-388–P-391 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Additional information
Note: Main part of this article is based on the review published in Sen’i Gakkaishi.[79]
Rights and permissions
Copyright information
© 2016 Springer Japan
About this chapter
Cite this chapter
Kikutani, T. (2016). Progress in Fiber Spinning Technology. In: The Society of Fiber Science and Techno, J. (eds) High-Performance and Specialty Fibers. Springer, Tokyo. https://doi.org/10.1007/978-4-431-55203-1_3
Download citation
DOI: https://doi.org/10.1007/978-4-431-55203-1_3
Published:
Publisher Name: Springer, Tokyo
Print ISBN: 978-4-431-55202-4
Online ISBN: 978-4-431-55203-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)