Abstract
Placement machines are the most critical and expensive pieces of equipment in SMT, which commonly constitute the bottleneck of the assembly line, and hence determine the throughput. Growing production volumes, reducing size of components and complexity of the boards reinforced the usage of full-automated assembly lines. Depending on the placement type, fullautomated placement systems can be observed in two main groups: simultaneous and sequential placement equipment.44
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literature
Krups, R., SMT-Handbuch: vom CAD-Entwurf zur Platinfertigung (in German), Vogel Verlag, Würzburg, 1991 p. 158.
Siemens AG (ed.), Halbleiter: technische Erläuterungen und Kenndaten für Studierende (in German), Siemens ktiengesellschaft, Berlin et al., 1990 p. 242.
Tirpak, T.M., Mohapatra, P.K., Nelson, P.C., Rajbhandari, R.R., A Generic Classification and Object-Oriented Simulation Toolkit for SMT Assembly Equipment, IEEE Transactions on Systems, Man, and Cybernetics-Part A: Systems and Humans, 32, 2002, 104–122.
Ayob, M., Kendall, G., A Survey on Surface Mount Deice Placement Machine Optimisation: Machine Classification, European Journal of Operational Research, 186, 2008, 893–914.
Brindley, K., Newnes Electronics Assembly Handbook, Heinemann Newnes, Oxford et al., 1990 p. 113.
Rowland, R., Belangia, P., Applied Surface Mount Assembly, Van Nostrand Reinhold, New York, 1993 p. 42–45.
Bachmann, Buchholz, Dürr, Eggerer, Geiger, Herzberg, Krause, Liegel, Messmer,Schiebel, Wormuth, Die Welt der Surface Mount Technology aus der Praxis für die Praxis (in German), Technologiehandbuch, Ausgabe 10/99, Siemens AG, 1999 p. 85.
NN (2001b), Kosteneinsparungen durch Schüttgutzuführungen (in German), Productronic, 10, 2001, 16–17.
Rowland, R., Belangia, P., Applied Surface Mount Assembly, Van Nostrand Reinhold, New York, 1993 p. 45.
Coombs, C.F. (ed.), Printed Circuits Handbook, McGraw-Hill, Inc., 3rd Edition, New York et al., 1988 p. 19.26.
Bachmann, Buchholz, Dürr, Eggerer, Geiger, Herzberg, Krause, Liegel, Messmer,Schiebel, Wormuth, Die Welt der Surface Mount Technology aus der Praxis für die Praxis (in German), Technologiehandbuch, Ausgabe 10/99, Siemens AG, 1999 p. 121.
Rowland, R., Belangia, P., Applied Surface Mount Assembly, Van Nostrand Reinhold, New York, 1993 p. 124.
Rowland, R., Belangia, P., Applied Surface Mount Assembly, Van Nostrand Reinhold, New York, 1993 p. 126.
Rowland, R., Belangia, P., Applied Surface Mount Assembly, Van Nostrand Reinhold, New York, 1993 p. 125.
Grunow, M., Günther, H.O., Föhrenbach, A., Simulation-based performance analysis and optimization of electronics assembly equipment, International Journal of Production Research, 38, 2000, 4247–4259.
Krups, R., SMT-Handbuch: vom CAD-Entwurf zur Platinfertigung (in German), Vogel Verlag, Würzburg, 1991 p. 159.
Schiebel, G., Wichtige Kriterien bei SMD-Bestückautomaten in Richtung Verarbeitung externer Gehäuseformen (in German), Tagungsbericht Leiterplatte, Bestückung, Baugruppenfertigung — Hybride, Bd. 2, VDI-Berichte 1133, VDI Verlag, 1994, p. 90.
Schiebel, G., Wichtige Kriterien bei SMD-Bestückautomaten in Richtung Verarbeitung externer Gehäuseformen (in German), Tagungsbericht Leiterplatte, Bestückung, Baugruppenfertigung — Hybride, Bd. 2, VDI-Berichte 1133, VDI Verlag, 1994, p. 89.
Coble, S.B., Bohn, R.E., Setup time reduction for electronics assembly: Combining simple (SMED) and sophisticated methods, Technical Report 1997-03, University of California, San Diego, 1997.
Siemens, Siplace, http://www.siplace.com, 2007.
Bachmann, Buchholz, Dürr, Eggerer, Geiger, Herzberg, Krause, Liegel, Messmer,Schiebel, Wormuth, Die Welt der Surface Mount Technology aus der Praxis für die Praxis (in German), Technologiehandbuch, Ausgabe 10/99, Siemens AG, 1999 p. 82.
Schiebel, G., Wichtige Kriterien bei SMD-Bestückautomaten in Richtung Verarbeitung externer Gehäuseformen (in German), Tagungsbericht Leiterplatte, Bestückung, Baugruppenfertigung — Hybride, Bd. 2, VDI-Berichte 1133, VDI Verlag, 1994, 91.
Prasad, R.P., Surface Mount Technology: Principles and Practice, Van Nostrand Reinhold, New York, 1989 p. 390.
Grunow, M., Günther, H.-O., Schleusener, M., Component allocation for printed circuit board assembly using modular placement machines, International Journal of Production Research, 41, 2003, 1311–1331.
Grunow, M., Günther, H.-O., Schleusener, M., Component allocation for printed circuit board assembly using modular placement machines, International Journal of Production Research, 41, 2003, 1311–1331.
Dürr, N., SIPLACE Bestückautomaten im Vergleich zu herkömmlichen Chipshootern (in German), SIPLACE Fachinformation, 2, Siemens AG, München, 1997a p. 1.
Kimman, C., 01005-Chips einfach bestücken (in German), Productronic, 10, 2005, 22–23.
Rights and permissions
Copyright information
© 2008 Gabler | GWV Fachverlage GmbH, Wiesbaden
About this chapter
Cite this chapter
(2008). SMT Placement Machines. In: Development and Evaluation of Setup Strategies in Printed Circuit Board Assembly. Gabler. https://doi.org/10.1007/978-3-8349-9872-9_3
Download citation
DOI: https://doi.org/10.1007/978-3-8349-9872-9_3
Publisher Name: Gabler
Print ISBN: 978-3-8349-1200-8
Online ISBN: 978-3-8349-9872-9
eBook Packages: Business and EconomicsBusiness and Management (R0)