Abstract
In the production of chemicals, a process adjustment such as feedback control is frequently used to reduce process variability. It is very important to judge whether or not the adjustment should be done automatically because an automatic process control (APC) system requires a large capital investment. This paper presents the determination of the adjustment timing on the basis of the process capability, and control charts combining information about the state of statistical control and process capability are also presented for the judgment of adjustment timing. Practitioners can assess both the adjustment interval and the number of adjustments by simulation or trial using the presented method. Moreover, the information is very useful for judging whether or not the automatic adjustment system should be introduced.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Box, G. E. P., & Jenkins, G. M. (1963). Further contributions to adaptive optimization and control: Simultaneous estimation of dynamics: Non-zero costs (pp. 943–974). Ottawa: Bulletin of the International Instiitute, 34th Session.
Box, G. E. P., & Kramer, T. (1992). Statistical process monitoring and feedback adjustment – A discussion. Technometrics,34(3), 251–267.
Box, G. E. P., & Luceño, A., & Paniagua-Quiñones, M. C. (2009). Statistical control by monitoring and adjustment. New York: Wiley.
Freund, R. A. (1957). Acceptance control charts. Industrial Quality Control,14(4), 13–23.
Higashide, M., Nishina, K., Kawamura, H., & Ishii, N. (2010). Statistical process control for semiconductor manufacturing process. Frontiers in Statistical Quality Control,9, 71–84.
Holmes, D. S., & Mergen, A. E. (2000). Exponentially weighted moving average acceptance charts. Quality and Reliability Engineering International,16, 139–142.
Luceño, A. (2000). Minimum cost dead band adjustment schemes under tool-wear effects and delayed dynamics. Statistics & Probability Letters,50, 165–178.
Montgomery, D. C. (2005). Introduction to statistical quality control. New York: Wiley
Montgomery, D. C., & Mastrangelo, C. M. (1991). Some statistical process control methods for autocorrelated data. Journal of Quality Technology,23(3), 179–193.
Muth, J. F. (1960). Optimal properties of exponentially weighted forecasts of time series with permanent and transitory components. Journal of the American Statistical Association,55, 299–306.
Park, C. (2007). An algorithm for the properties of the integrated process control with bounded adjustments and EWMA monitoring. International Journal of Production Research,23(1), 5571–5587.
Spiring, F. A. (1991). Assessing process capability in the presence of systematic assignable cause. Journal of Quality Technology,23(2), 125–134.
Taguchi, G. (1981). On-line quality control during production. Tokyo: Japanese Standard Association.
Taguchi, G. (1993). Taguchi on Robust Technology Development. New York: ASME.
Vander Wiel, S. A. (1996). Monitoring processes that wander using integrated moving average models. Technometrics,38, 139–151.
Acknowledgements
This work was supported by KAKENHI (22710151). The authors acknowledge the Renesas Electronics Corporation Group for their constructive comments and provision of data.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Kawamura, H., Nishina, K., Suzuki, T. (2012). Process Adjustment Control Chart for Simultaneous Monitoring of Process Capability and State of Statistical Control. In: Lenz, HJ., Schmid, W., Wilrich, PT. (eds) Frontiers in Statistical Quality Control 10. Frontiers in Statistical Quality Control, vol 10. Physica, Heidelberg. https://doi.org/10.1007/978-3-7908-2846-7_9
Download citation
DOI: https://doi.org/10.1007/978-3-7908-2846-7_9
Published:
Publisher Name: Physica, Heidelberg
Print ISBN: 978-3-7908-2845-0
Online ISBN: 978-3-7908-2846-7
eBook Packages: Mathematics and StatisticsMathematics and Statistics (R0)