Advertisement

Serviceability and Durability

  • Wayne Ernest Brownell
Part of the Applied Mineralogy book series (MINERALOGY, volume 9)

Abstract

With structural clay products, the proof of the pudding is their ability to resist all the rigors of service conditions and to function well in their intended purposes for very long times. When one builds his home, factory, or place of business using clay products, he likes to think that it will last forever with no maintenance, and perhaps it might, if it did not become obsolete, outgrown, or exposed to natural catastrophes. Furthermore, the durability of structural clay products is expected to exceed other materials such as wood, metals, and plastics, and indeed it will, as evidenced by the antique products up to 10,000 years old illustrated in Chapt. 1. Bricks and tiles are expected to produce strong buildings and pavements. Roofing tiles must be designed to keep out rain and snow, and pipes for the transportation of all kinds of wastes are designed to produce leak-proof joints with a minimum of skill and labor.

Keywords

Manganese Dioxide Frost Damage Sewer Pipe Mortar Joint Saturation Coefficient 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    McBurney, J. W., and A. R Eberle: Freezing and thawing tests for building brick. Proc. Am. Soc. Testing Mats. 38, Part II, 470–83 (1938).Google Scholar
  2. 2.
    McBurney, J. W., and J. C. Richmond: Strength, Absorption, and Resistance to Laboratory Freezing and Thawing of Building Brick Produced in the United States. Natl. Bur. Stds. (U.S.), Materials and Structures Rept. No. BMS60 (1940).Google Scholar
  3. 3.
    McBurney, J. W., J. C. Richmond, and M. A. Copeland: Relations among certain specification properties of building brick and effects of differences in raw materials and methods of forming. J. Am. Ceram. Soc. 35, 309–18 (1952).CrossRefGoogle Scholar
  4. 4.
    McBurney, J. W., and P. V. Johnson: Durability of deaired brick. J. Am. Ceram. Soc. 39, 159–68 (1956).CrossRefGoogle Scholar
  5. 5.
    Carlsson, O.: The Influence of Submicroscopic Pores on the Resistance of Bricks Towards Frost, Trans. Chalmers Univ. Tech., No. 212, Gothenburg, Sweden, 1959.Google Scholar
  6. 6.
    Blachére, J. R, and J. E. Young: Failure of capillary theory of frost damage as applied to ceramics. J. Am. Ceram. Soc. 57, 212–16 (1974).CrossRefGoogle Scholar
  7. 7.
    Cole, W. F.: Terra cotta roofing tile deterioration in Australia. Brit. Clayworker 70, 126–33 (1961).Google Scholar
  8. 8.
    McBurney, J. W.: Masonry cracking and damage caused by moisture expansion of structural clay tile. Proc. Am. Soc. Testing Mats. 54, 1219–41 (1954).Google Scholar
  9. 9.
    Hosking, J. S., and H. V. Huber: Moisture expansion of clay products with special reference to bricks. Trans. 7th Int. Ceram. Cong., London, pp. 311–25, 1960.Google Scholar
  10. 10.
    Demeduck, T., and W. F. Cole: Contribution to the Study of Moisture Expansion in Ceramic Materials. J. Am. Ceram. Soc. 43, 359–67 (1960).CrossRefGoogle Scholar
  11. 11.
    Young, J. E.: The Influence of Physical Adsorption of Water Vapor on the Moisture Expansion of Fired Kaolin, Ph.D. Thesis, New York State College of Ceramics, Alfred University, Sept. 1961.Google Scholar
  12. 12.
    Smith, A. N.: Investigations on the moisture expansion of porous ceramic bodies. Trans. Brit. Ceram. Soc. 54, 300–18 (1955).Google Scholar
  13. 13.
    Milne, A. A.: Expansion of fired kaolin when autoclaved and the effect of additives. Trans. Brit. Ceram. Soc. 57, 148–60 (1958).Google Scholar
  14. 14.
    Young, J. E., and W. E. Brownell: Moisture expansion of clay products. J. Am. Ceram. Soc. 42, 571–81 (1959).CrossRefGoogle Scholar
  15. 15.
    Brownell, W. E., and J. E. Young: Effects of Composition on Moisture Expansion of Clay Products, New York State College of Ceramics, Mon. Prog. Rept. No. 269, 1961.Google Scholar
  16. 16.
    Cole, W. F.: Some relationships between mineralogical and chemical composition and moisture expansion of fired clay bodies. J. Austral. Ceram. Soc. 4, 5–9 (1968).Google Scholar
  17. 17.
    Yates, D. J. C.: The expansion of porous silica glass produced by the adsorption of non-polar gases at liquid air temperatures. Trans. Brit. Ceram. Soc. 54, 272–99 (1955).Google Scholar
  18. 18.
    Crupain, D.: Interrelation of Durability Tests on Glazed Brick, B.S. Thesis, New York State College of Ceramics, Alfred University, June 1961.Google Scholar
  19. 19.
    Ritchie, T., and J. J. Davison: Factors Affecting Bond Strength and Resistance to Moisture Penetration of Brick Masonry, ASTM Spec. Tech. Pub. No. 320, pp. 16–20, 1962; NRC (Canada), Div. Bldg. Res. Paper No. 192, Ottawa, 1963.Google Scholar
  20. 20.
    Carlson, B. C., and W. D. Betts: How plant-applied silicones affect wall strengths. Brick Clay Rec. 135, 49–51; 68 (1959).Google Scholar
  21. 21.
    Waters, E. H.: The Effect of the Moisture Content of Ceramic Tiles on the Strength of the Tile/Mortar Bond, CSIRO, Div. Bldg. Res. Tech. Paper No. 7, Melbourne, Australia, 1959.Google Scholar
  22. 22.
    Brownell, W. E.: The Causes and Control of Efflorescence on Brickwork, Structural Clay Products Institute (now Brick Institute of America) Res. Report No. 15, McLean, Va., Aug. 1969.Google Scholar
  23. 23.
    Cole, W. F.: Some aspects of the weathering of terra cotta roofing tiles. Austral. J. Appl. Sci. 10 (3) 346–63 (1959).Google Scholar
  24. 24.
    Bebbington, P. J., and R. C. Feagin: Discoloration of mortar joints by manganese-colored brick. Am. Ceram. Soc. Bull. 45, 271–76 (1966).Google Scholar
  25. 25.
    Brownell, W. E., J. L. Kenna, and P. P. Witko, Jr.: Staining of mortar by manganese colored brick. Am. Ceram. Soc. Bull. 45, 1055–59 (1966).Google Scholar
  26. 26.
    Brownell, W. E.: Preparation of a nonbleeding manganese stain. Am. Ceram. Soc. Bull. 54, 193–94 (1975).Google Scholar
  27. 27.
    Soderstrum, W. K.: Cleaning Clay Masonry, SCPRF (now Brick Inst. of America) McLean, Va., May 1964.Google Scholar
  28. 28.
    Young, J. E.: Some factors affecting the development and removal of vanadium efflorescence. Am. Ceram. Soc. Bull. 38, 260–63 (1959).Google Scholar
  29. 29.
    Anonym: Efflorescence, Part 2: The Cleaning and Maintenance of Brickwork, Clay Prod. Bull., New Zealand Pottery and Ceramics Res. Assn., Pub. No. 19, August 1961.Google Scholar

Copyright information

© Springer-Verlag/Wien 1976

Authors and Affiliations

  • Wayne Ernest Brownell
    • 1
  1. 1.New York State College of Ceramics at Alfred UniversityAlfredUSA

Personalised recommendations