Abstract
The Selective Laser Sintering of pre-coated sands is a promising Rapid Prototyping technique for the construction of sand shells for foundry. In this article, the definition of mathematical simulation concepts and a detailed experimental analysis, performed both with conventional and unconventional techniques, is proposed. In particular, two methods to calculate the temperature distribution within the sand bed and the depth of the heat-affected zone are studied. The results obtained with the experimental methodology and those coming from previous experimental analyses have been used to validate the described mathematical models, that represent a first step for the process comprehension, control and optimisation. Two kinds of pre-coated sands, widely used in shell-moulding, have been considered: zirconia and silica. The guidelines for future simulation refinements are also given.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Beaman, J.; Barlow, J.; Bourrel, D.; Crawford, R.; Marcus, H.; McAlea, K.: Solid Freeform Fabrication — A New Direction in Manufacturing, Kluwer Academic Publishers, 1997.
Nelson, J.C.; Vail, N.K.; Barlow, J.; Beaman, J.; Bourrel, D.; Marcus, H.: Selective Laser Sintering of Polymer Coated Silicon Carbide Powders, Ind. Eng. Chem. Res., n. 34 (1995), 1641–1651.
Papadatos, A.L.; Ahzi, S.; Paul, F.W.: On Enhancing the Selective Laser Sintering Process: Part I: , Clenson University Report (1995).
Papadatos, A.L.; Ahzi, S.; Deckard, C.R.; Paul, F.W.: On dimensional stabilities: modelling of the bonus-z during the SLS process, SFF Symposium Proceedings, Austin Texas (1997).
Santochi, M.; Tantussi, G.; Dini, G.: Laser Sintering of Pre-Coated Sands using Rapid Prototyping Techniques, 41. Internationales Wissenchaftliches Kolloquium, Band 1, Ilmenau Germany (1996), 387–392.
CIRP Co-operative Research Working Group on Laser Absorption, Paris, Private Communication (1996)
Bejan, A.: Heat Transfer, John Wiley and Sons Inc., New York, 1993, 151–154, 18 2184.
Eckert, E.R.G.; Drake, R.M.: Analysis of Heat and Mass Transfer, Mc Graw Hill, New York, 1972, 237–238.
Patankar, S.: Numerical Heat Transfer and Fluid Flow, McGraw Hill, New York, 1980.
Show, T. L.; Carrol, J. C.: Application of Baseline Correction to the «Ratio Method» of DSC Specific Heat Determination, 13 Symposium on Thermo-physical Properties, Boulder Colorado (1997).
Ueda, T.; Yamada, K.; Nakayama, K.: Temperature of Work Materials Irradiated with CO2 laser, Annals of the CIRP, Vol. 46 (1997) n. 1, 117–122
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer-Verlag Wien
About this paper
Cite this paper
Dini, G., Lanzetta, M., Santochi, M., Tantussi, G., Franco, A. (1999). An Approach to Selective Laser Sintering (SLS) of Pre-Coated Sands for Shell Moulding. In: Kuljanic, E. (eds) AMST ’99. International Centre for Mechanical Sciences, vol 406. Springer, Vienna. https://doi.org/10.1007/978-3-7091-2508-3_62
Download citation
DOI: https://doi.org/10.1007/978-3-7091-2508-3_62
Publisher Name: Springer, Vienna
Print ISBN: 978-3-211-83148-9
Online ISBN: 978-3-7091-2508-3
eBook Packages: Springer Book Archive