Abstract
This paper deals with the determination of optimal tool geometry for longitudinal turning. A tool life is usually the main machinability factor and, as such, the basic optimization criterion of tool geometry. The establishing of tool response function is done by the second order central composite design of experiment. Since the criterion function is inherently nonlinear in this case, i.e. besides linear contains quadratic elements and two-factorial interactions, the care must be taken to employ an appropriate optimization method for solving such function. Therefore, the optimization procedure based on nonlinear programming methods is proposed. Furthermore, the testing example of developed algorithm is presented.
Chapter PDF
References
Cukor, G.: Tool Life Models for Advanced Machining Systems, Proceedings of 4th International Conference on Production Engineering CIM’97, Cebalo, R. (Ed.), ISBN 953–97181–0–4, Croatian Association of Production Engineering, Opatija 1997, B35 – 42
Montgomery, C. D.: Design and Analysis of Experiments, Wiley, New York 1984
Jurkovié, M., Casni, N.: Mathematical Modeling and Optimization of the Elements of Tool Geometry for Turning, Proceedings of 3rd International Conference on Production Engineering CIM’95, Cebalo, R. (Ed.), ISBN 953–96501–2–7, Croatian Association of Production Engineering, Zagreb 1995, D47 – 55, (in Croatian)
Cukor, G.: Optimization of Machining Process, Master of Science Thesis, Faculty of Engineering, University of Rijeka, Rijeka 1994, (in Croatian)
Himmelblau, D. M.: Applied Nonlinear Programming, McGraw-Hill, New York 1972
Osyczka, A.: Multicriterion Optimization in Engineering with Fortran Programs, Ellis Horwood Ltd, New York 1984
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer-Verlag Wien
About this paper
Cite this paper
Cukor, G., Jurkovic, M. (1999). Optimization of Turning Tool Geometry by Nonlinear Programming. In: Kuljanic, E. (eds) AMST ’99. International Centre for Mechanical Sciences, vol 406. Springer, Vienna. https://doi.org/10.1007/978-3-7091-2508-3_27
Download citation
DOI: https://doi.org/10.1007/978-3-7091-2508-3_27
Publisher Name: Springer, Vienna
Print ISBN: 978-3-211-83148-9
Online ISBN: 978-3-7091-2508-3
eBook Packages: Springer Book Archive