Abstract
This paper investigates the micromachinability of Cu-Be alloys and the effect of microstructure. The material temper, tool material, lead content, and machining parameters were varied to assess their effects. Similar chip formation mechanisms were found when the depths of cut varied from few millimeters to submicron levels. Good agreement between predicted and measured data was obtained providing grain boundaries were visible on a machined surface. A flatness of 20 nm over the 9.5 mm diameter rod, and roughness of 2 nm R a and 8 nm R t were achieved. Beryllide inclusions and the precipitates degraded the micromachinability, while the lead particles improved it.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Decker D.L., Bennett J.M., and Soileau M.J.: Surface and Optical Studies of Diamond Turned and Other Metal Mirrors, SPIE Advances in Precision Machining of Optics, 93 (1976), 71–80.
Walter J.S.: The Art of Metal Polishing, J. SPIE, 65 (1975), 35–41.
Inamura T. and Takezawa N.: Atomic Scale Cutting in a Computer Using Crystal Models of Copper and Diamond, Annals of the CIRP, 41 (1992) 1, 121–124.
Liang Y., Moronuki N., and Furakawa: Calculations of The Effect of Material Anisotropy on Microcutting Processes, J. Precision Engineering, 16 (1994), 2, 132–138.
Moronuki N., Liang Y., Furukawa Y.: Experiments on The Effect of Material Properties on Microcutting Processes, J. Precision Engineering, 16 (1994) 2, 124–131.
Moriwaki T., Sugimura N., and Luan S.: Combined Stress, Material Flow and Heat Analysis of Orthogonal Micromachining of Copper, Annals of the CIRP, 42 (1993) 1, 75–78.
Brinksmeier E., Preuß, and Riemer O.: From Friction to Chip Removal: An Experimental Investigation of The Microcutting Process, Proceedings, 3rd Int. Conf. Ultraprecision in Manufacturing Engineering, Germany, 1994, 393–399.
Can J.W. and Feger C.: Ultraprecision Machining of Polymers, J. Precision Engineering, 15 (1993) 4, 221–237.
Lucca D.A., and Seo Y.W.: Effect of Tool Edge Geometry on Energy Dissipation in Ultraprecision Machining, Annals of the CIRP, 42 (1993) 1, 83–86.
Burnham M.W.: The Mechanics of Micromachining, SPIE Advances in Precision Machining of Optics, 93 (1976), 38–45.
Arnold J.B., Steger P.J., and Morris T.O.: Machinability Aspects of Diamond-Turned Metal Optics, SPIE Metal Optics, 65 (1975), 108–117.
Arnold J.B., Morris T.O., Sladky R.E., and Steger P.J.: Machinability Studies of Infrared Window Materials and Metals, SPIE Advances in Precision Machining of Optics; 93 (1976), 96–103.
Geisler A.H., Mallery J.H., and Steigert F.E.: On the Mechanism of Precipitation in Copper Beryllium Alloys, J. of Metals, 5 (1952), 307–306.
Hibbard W.R. Jr. and Yen M.K.: Wire Texture of Copper and Its Binary Alpha Solid Solution Alloys With’ Aluminum, Nickel And Zinc, Metals Technology, TP 2334, Feb. 1948.
Backofen W.A., Deformation Processing, Addison Wesley Inc., 1972.
Barrett C.S, Structure of Metals, 2nd edition, McGraw Hill Inc., 1952.
Harkness J. and Guha A.: Metallographic Techniques for Beryllium Copper and Beryllium Nickel Alloys, Brush-Wellman company, undated brochure.
Arcona C. and Dow T.A.: A New Technique for Studying The Chip Formation Process in Diamond Turning, J. Precision Engineering, 18 (1996) 2 /3, 157–160.
Whitehouse D.J., Handbook of Surface Metrology, IOP publishing, UK, 1994.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer-Verlag Wien
About this paper
Cite this paper
Hung, N.P., Lim, S.W., Zhong, Z.W. (1999). Effect of Microstructure on Ultraprecision Machining of Copper-Beryllium Alloys. In: Kuljanic, E. (eds) AMST ’99. International Centre for Mechanical Sciences, vol 406. Springer, Vienna. https://doi.org/10.1007/978-3-7091-2508-3_16
Download citation
DOI: https://doi.org/10.1007/978-3-7091-2508-3_16
Publisher Name: Springer, Vienna
Print ISBN: 978-3-211-83148-9
Online ISBN: 978-3-7091-2508-3
eBook Packages: Springer Book Archive