Abstract
Parallel robots are known to o er light, highly agile structures, particularly suited for assembly and machining tasks. By the same token, parallel robots pose unique challenges to the robot designer, in that a compromise must be found among the various requirements: large workspace with respect to footprint; high sti — ness; high natural frequencies; high mobility; and low cost, among others. Most parallel robots are designed with as many limbs as degrees of freedom (dof), which increases then- footprint and limits their dextrous workspace—that region of the workspace where the moving platform can undergo a full rotation. An alternative to these designs is a reduced number of limbs, lower than their dof, but this calls for limbs driven by two or more motors. The challenge here is to drive two axes in a serial array with two motors mounted on the base platform. This mode of driving has not received due attention from the robot-design community, but is worth exploring. Proposed in this paper is a qu sispheric l linkage intended to drive the tilt axis of one of the two limbs of a four-dof parallel robot, currently under development. The linkage is termed quasispherical in that it is nominally designed as a spherical four-bar linkage, but spherical linkages impose extremely tight tolerances to make them assemblable. A common alternative to tight tolerances is an increase in the degree of freedom of the linkage, upon replacing the passive revolutes by orientable pinned-joints, which are kinematically equivalent to spherical joints, thereby increasing unnecessarily the mobility of the linkage. This compromises the linkage sti ness, a major concern for e ective actuation. As an alternative, a linkage of the R type is proposed here, where R andstand for revolute and cylindrical joints. However, cylindrical joints are not that common as machine elements, besides being demanding in terms of tolerances, while o ering low sti ness. A realization of the joint is proposed here by means of a serial array of a R and a screw joint, labeled H.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsPreview
Unable to display preview. Download preview PDF.
Bibliography
Angeles, J. and Morozov, A. (2006). Four-degree-of-freedom Parallel Manipulator for Producing Schön tes Motions, Patent No. US 7,127,962, Oct. 31st.
Bidault, F., Teng, CP. and Angeles, J. (2001). “Structural optimization of a spherical parallel manipulator using a two-level approach,” Proc. ASME 2001 Design Engineering Technical Conferences, Pittsburgh, PA, Sept. 9–12, CD-ROM DETC 200l/DAC-21030.
Caro, S., Khan, W.A., Pasini, D. and Angeles, J. (2010). The rule-based conceptual design of the architecture of serial Schönflies-motion generators. Mechanism and Machine Theory, Vol. 45, No. 2. pp. 251–260.
Chiang, C.H. (1988). Kinematics of Spherical Mechanisms, Cambridge University Press, Cambridge.
Company, O., Pierrot, F., Shibukawa, T. and Morita, K. (2001). Four-Degree-of-Freedom Parallel Robot, Patent No. EP1084802, March 21st.
Freudenstein, F. (1955). Approximate synthesis of four-bar linkages. Trans. ASME, Vol. 77, pp. 853–861.
Gauthier, J.-F., Angeles, J., Nokleby, S. and Morozov, A. (2008). Optimization of a test trajectory for SC ARA Systems. In Lenarcic, J. and Wenger, P. (editors), Advances in Robot Kinematics. Analysis and Design, Springer, Dordrecht, pp. 225-234.
Gosselin, C. and Angeles, J. (1989). Optimization of planar and spherical function generators as minimum-defect linkages. Mechanism and Machine Theory, Vol. 24, No. 4, pp 293–307.
Hartenberg, R.S. and Denavit, J. (1964). Kinematic Synthesis of Linkages, McGraw-Hill Book Company, New York.
Khan, W.A., Caro, S., Angeles, J. and Pasini, D. (2007). A formulation of complexity-based rules for the preliminary design stage of robotic architectures. Proc. Int. Conf. Engineering Design, ICED’07, Paris, August 28–31.
Khan, W.A. and Angeles, J. (2010). Novel Paradigm for the Qualitative Synthesis of Simple Kinematic Chains Based on Complexity Measures, Department of Mechanical Engineering and Centre for Intelligent Machines Technical Report TR-2010-01, McGill University, Montreal. Available at ttp://www.cim.mcgill.ca/ rmsl/Index/index.htm
Liu, Z. and Angeles, J. (1992). Least-square optimization of planar and spherical four-bar function generators under mobility constraints. ASME J. Mechanical Design, Vol. 114, pp. 569–573.
Makino, H. and Furuya, N. (1980). Selective compliance assembly robot arm. Proc. First Int. Conf. Assembly Automation, March, Brighton.
Merlet, J.-P. (2006). Parallel Robots, Second Edition, Springer, Dordrecht.
Morozov, A. and Angeles, J. (2007). “The mechanical design of a novel Schönflies-motion generator,” Robotics and Computer-Integrated Manufacturing, Vol. 23, pp. 82–93.
Tinubu, S.O. and Gupta, K.C. (1984). Optimal synthesis of function generators without the branch defect. ASME, J. Mech., Transmissions, and Auto, in Design, Vol. 106, pp. 348–354.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 CISM, Udine
About this paper
Cite this paper
Angeles, J. (2010). Robust Drives for Parallel Robots. In: Parenti Castelli, V., Schiehlen, W. (eds) ROMANSY 18 Robot Design, Dynamics and Control. CISM International Centre for Mechanical Sciences, vol 524. Springer, Vienna. https://doi.org/10.1007/978-3-7091-0277-0_2
Download citation
DOI: https://doi.org/10.1007/978-3-7091-0277-0_2
Publisher Name: Springer, Vienna
Print ISBN: 978-3-7091-0276-3
Online ISBN: 978-3-7091-0277-0
eBook Packages: EngineeringEngineering (R0)