Chapter PDF
Literaturverzeichnis
Arnold, B. (1996): Customizing — Erfolgsfaktor für PPS. Standardsoftware-Lösungen der Marktführer, München.
Bagchi, U./ Gutierrez, G. (1992): Effect of Increasing Component Commonality on Service Level and Holding Cost, in: Naval Research Logistics, Vol. 39, No. 6, S. 815–832.
Baker, K. R./ Magazine, M. J./ Nuttle, H. L. W. (1986): The Effect of Commonality on Safety Stocks in a Simple Inventory Model, in: Management Science, Vol. 32, No. 8, S. 982–988.
Benders, J. F. (1962): Partitioning procedures for solving mixed-variables programming problems, in: Numer. Mathem., Vol. 4, S. 238–252.
Bertrand, J. W. M./ Zuijderwijk, M./ Hegge, H. M. H. (2000): Using hierarchical pseudo bills of material for customer oder acceptance and optimal material replenishment in assemble to order manufacturing of non-modular products, in: International Journal of Production Economics, Vol. 66, S. 171–184.
Bottema, A./ van der Tang, L. (1992): A Product configurator as key decision support system (Baan-Triton), in: H. J. Pels and J.C. Wortmann (Eds.), Integration in Production Management Systems, Amsterdam.
Büchel, A. (1982): An Overview of Possible Procedures for Stochastic MRP, in: Engineering Costs and Production Economics, Vol. 6, S. 43–51.
Büchel, A. (1983): Stochastic Material Requirements Planning for Optional Parts, in: International Journal of Production Research, Vol. 21, No 4., S. 511–527.
Carson, C. (1996): Knowledge-Based Product Configuration, in: PC AI, Vol. 10, No. 1.
Carson, C. (1997): Intelligent Sales Configuration, in: PCAI, Vol. 11, No. 1, S. 31–34.
Chu, C. H./Hayya, J.C. (1988): “Buffering decisions under a MRP environment: a review”, Omega 18, 325-337.
Clay, P. (1990): Advanced Available-to-Promise Concepts/Techniques, in: APICS International Conference Proceedings, S. 381-387.
Corsten, H./ Gössinger, R. (2001): Advanced Planning Systems — Anspruch und Wirklichkeit, in: PPS Management, 6. Jg. (2001), H. 2, S. 32–39.
Da Silveira, G./ Borenstein, D./ Fogliatto, F. S. (2001): Mass customization: Literature review and research directions, in: International Journal of Production Economics, Vol. 72, S. 1–13.
Deák, I. (1986): Computing Probabilities of Rectangles in Case of Multinormal Distribution, in: Journal of Statistical Computation and Simulation, Vol. 26, S. 101–114.
Deäk, I. (1998): Regression Estimators Related to Multinormal Distributions: Computer Experiences in Root Finding, in: K. Matri and P. Kall (Eds.), Stochastic Programming Methods and Technical Applications, Springer Verlag, Berlin — Heidelberg.
Desai, P./ Kekre, S./ Radhakrishnan, S./ Srinivasan, K. (2001): Product Differentiation and Commonality in Design: Balancing Revenue and Cost Drivers, in: Management Science, Vol. 47, No. 1, S. 37–51.
Dinitz, M. (1990): A Rules-Based System Performs Features and Options System, in: HE Solutions, Vol. 22, No. 11.
Erens, F./ Hegge, H./ van Veen, E. A./ Wortmann, J. C. (1992): Generative bills-of-material: an overview, in: H. J. Pels and J. C. Wortmann (Eds.), Integration in Production Management Systems, Amsterdam, S. 93–113.
Erens, F.J./ Hegge, H.M.H. (1994): Manufacturing and sales co-ordination for product variety, in: International Journal of Production Economics, Vol. 37, No. 1, S. 83–99.
Erens, F./ Verhulst, K. (1997): Architectures for product families, in: Computers in Industry, Vol 33, S. 165–178.
Everdell, R. C. (1983): Planning bills of material: Tools for master scheduling, in: APICS National Conference Proceedings, Chicago, S. 265-268.
Eynan, A. (1996): The impact of demands’ correlation on the effectiveness of component commonality, in: International Journal of Production Research, Vol. 34, No. 6, S. 1581–1602.
Fleischmann, B. (1988): Operations-Research-Modelle und-Verfahren in der Produktionsplanung, in: Zeitschrift für Betriebswirtschaft, 58. Jg., H.3, S. 347–372.
Fleischmann, B./Meyr, H./Wagner, M. (2000): Advanced Planning, in: H. Stadtler u. C. Kilger (Eds.), Supply Chain Management and Advanced Planning. Concepts, Models, Software and Case Studies, Berlin — Heidelberg — New York.
Frontline Systems Inc. (1999): Solver User’s Guide. Dynamic Link Library Version 3.5, P.O. Box 4288, Incline Village, NV 89450.
Frontline Systems Inc. (2000): “http://www.frontsys.com”, 12. April 2000.
Fu, H. / Fong, D. K. H. (1998): A note on the convexity of the objective function for a simple common component inventory problem, in: International Journal of Production Economics, Vol. 55, No. 2, S. 143–148.
Gerchak, Y./ Henig, M. (1986): An Inventory Model with Component Commonality, in: Operations Research Letters, Vol. 5, S. 157–160.
Gerchak, Y./ Henig, M. (1989): Component Commonality in Assemble to Order Systems: Models and Properties, in: Naval Research Logistics, Vol. 36, No. 1, S. 61–68.
Gerchak, Y./ Magazine, M.J./ Gamble, A.B. (1988): Component Commonality with Service Level Requirements, in: Management Science, Vol. 34, No. 6, S. 753–760.
Glaser, H. et al. (1991): PPS — Produktionsplanung und-Steuerung, Wiesbaden.
Graves, S. C. (1988): Safety Stocks in Manufacturing Systems, in: Journal of Manufacturing and Operations Management, Vol. 1, No. 1, S. 67–101.
Grupp, B. (1995): Aufbau einer optimalen Stücklistenorganisation. Offene Stücklisten, Variantengenerator, PPS-Rahmen, CAD-Connection, Praxisbeispiele, Renningen-Malmsheim.
Harris, F. H./ Pinder, J. P. (1995): A Revenue Management Approach to Demand Management and Order Booking in Assemble-to-Order Manufacturing, in: Journal of Operations Management, Vol. 13, No. 4, S. 299–309.
Hegge, H.M.H/ Wortmann, J.C. (1991): Generic bill-of-material: a new product model, in: International Journal of Production Economics, Vol. 23, No. 1/3, S. 117–128.
Hegge, H.M.H. (1992): A generic bill-of-material using indirect identifications of products, in: Production Planning & Control, Vol. 3, No. 3, S. 336–342.
Heinen, E. (1991): Industriebetriebslehre. Entscheidungen im Industriebetrieb, 9. Auflage, Wiesbaden.
Heinrich, C. E. (1989): Das MRPII-Planungskonzept (Manufacturing Resource Planning) und dessen Realisierung mit Standardsoftware, dargestellt am System R/2 der SAP AG, in: G. Zäpfel (Ed.), Neuere Konzepte der Produktionsplanung und-Steuerung, Linz, S. 95-112.
Hillier, F. S./Lieberman, G. J. (1997): Operation Research. Einführung, 5. Auflage, München — Wien.
Inderfurth, K. (1996): Lagerhaltungsmodelle, in: Handwörterbuch der Produktionswirtschaft, 2. Auflage, Stuttgart, S. 1024-1037.
Jönsson, H./ Silver, E. (1989a): Optimal and Heuristic Solutions for a Simple Common Component Inventory Problem, in: Engineering Costs and Production Economics, Vol. 16, S. 257–267.
Jönsson, H./Silver, E. A. (1989b): Common Component Inventory Problems with a Budget Constraint: Heuristics and Upper Bounds, in: Engineering Costs and Production Economics, Band 18, S. 71-81.
Jönsson, H./ Silver, E. A. (1990): On the Commonality Problem in Multi-Stage Inventory Control Systems, in: G. Fandel u. G. Zäpfel (Eds.), Modern Production Concepts, Berlin — Heidelberg — New York, S. 302–318.
Kern, G. M./ Guerrero, H. H. (1990): A Conceptual Model for Demand Management in the Assemble-to-Order Environment, in: Journal of Operations Management, Vol. 9, No. l, S. 65–84.
Kestel, R. (1995): Variantenvielfalt und Logistiksysteme. Ursachen-Auswirkungen-Lösungen, Wiesbaden.
Kim, K./ Chhajed, D. (2000): Commonality in product design: Cost saving, valuation change and cannibalization, in: European Journal of Operational Research, Vol. 125, No. 3, S. 602–621.
King, B. E./ Benton, W. C. (1987): Alternative Master Production Scheduling Techniques in an Assemble-to-Order Environment, in: Journal of Operations Management, Vol. 7, Nos. 1 and 2, S. 179–201.
Kleinman, N. L./ Spall, J. C./ Naiman, D. Q. (1999): Simulation-Based Optimization with Stochastic Approximation Using Common Random Numbers, in: Management Science, Vol. 45, No. 11, S. 1570–1578.
Kneppelt, L. R. (1984): Product Structuring Considerations for Master Production Scheduling, in: Production and Inventory Management, Vol. 25, No. 1, S. 83–99.
Kreyszig, E. (1982): Statistische Methoden und ihre Anwendungen, 7. Auflage, Göttingen.
Kurbel, K. (1998): Produktionsplanung und-Steuerung. Methodische Grundlagen von PPS-Systemen und Erweiterungen, 3. Auflage, München — Wien.
Landvater, D. V./ Gray C. D. (1989): MRP II Standard System. A Handbook for Manufacturing Software Survival, Oliver Wight Publications, Essex Junction, VT.
Lehner, F. et al. (1991): Organisationslehre für Wirtschaftsinformatiker. München — Wien.
Lieberman, M. (1990): MRP II for Assemble-To-Order Manufactures, in: P&IM review & APICS news, Vol. 10, No. 12, S. 38–41.
Lin, N.-P./ Krajewski, L. (1992): A Model for Master Production Scheduling in Uncertain Environments, in: Decision Sciences, Vol. 23., No. 4., S. 839–861.
Lin, N.-P. et al. (1994): The effects of environmental factors on the design of master production scheduling systems, in: Journal of Operations Management, Vol. 11, No. 4, S. 367–384.
Lingnau, V. (1994): Variantenmanagement. Produktionsplanung im Rahmen einer Produktdifferenzierungsstrategie, Berlin.
Mather, H. (1986): Design, bills-of-material, and forecasting — the inseparable threesome, in: Production and Inventory Management, First Quarter, 1986, S. 90-107.
McDermott, C. M./ Stock, G. N. (1994): The Use of Common Parts and Designs in High-Tech Industries: A Strategic Approach, in: Production and Inventory Management Journal, Vol. 35, No. 3, S. 65–69.
Missbauer, H. (1998): Bestandsregelung als Basis für eine Neugestaltung von PPS-Systemen, Heidelberg.
Mülder, W./ Störmer, W. (1995): Personalzeiterfassung und Betriebsdatenerfassung, 2. Auflage, Luchterhand Verlag, Neuwied.
Murthy, D. N. P/Ma, L. (1991): MRP with uncertainty: a review and some extensions, in: International Journal of Production Economics, Vol. 25, No. 1/3.
NAG — Numerical Algorithms Group Ltd (1998): C Library Mark 5 Documentation, Online-Dokumentation, Oxford UK.
Neumann, K./Morlock, M. (1993): Operations Research, München — Wien.
Pherson, D./ Fillebeen, H./ Savigné, P. (1994): Configuring and Pricing with Expert Systems, in: International Journal of Advanced Manufacturing, Vol. 9, No. 4, S. 253–262.
Piller, F. T. (1998): Kundenindividuelle Massenproduktion, München — Wien.
Prékopa, A. (1980): Logarithmic Concave Measures and Related Topics, in: M. A. H. Dempster (Eds.), Stochastic Programming, Academic Press, New York, S. 63–82.
Proud, J. F. (1994): Master Scheduling. A Practical Guide to Competitive Manufacturing, Oliver Wight Publications, Essex Junction.
Reader, J. (1996): Configurator goes live for Wynn Marine, in: Assembly automation, Vol. 16, No. 2, S. 37–39.
Robinson, S. (1994): Successful Simulation. A Practical Approach to Simulation Projects, McGraw-Hill, London u.a.
Rohde, J./ Meyr, H./ Wagner, M. (2000): Die Supply Chain Planning Matrix, in: PPS Management, 5. Jg. (2000), H. 1, S. 10–15.
Rosenberg, O. (1996): Variantenfertigung, in: Handwörterbuch der Produktionswirtschaft, 2. Auflage, Stuttgart.
Sabin, D. /Weigel, R. (1998): Product Configuration Frameworks — A Survey, in: IEEE Intelligent Systems & their Applications, Vol. 13, No. 4.
Sari, F. J. (1982): The Planning Bill of Material — All It’s Cracked Up to Be?, in: APICS 25th Annual Conference Proceedings, S. 324-327.
Schräge, L. E. (1997): Optimization modeling with LINDO, Brooks/Cole Publishing Company, Pacific Grove — London u. a.
Stadtler, H. (1999): Supply Chain Management und Supply Chain Planning. In: OR-News, 5 (März 1999), S. 35-37.
Stadtler, H./ Kilger, C. (2000): Supply Chain Management and Advanced Planning. Concepts, Models, Software and Case Studies, Berlin — Heidelberg — New York.
Tong, Y. L. (1990): The Multivariate Normal Distribution, Springer-Verlag, New York.
Tsubone, H./ Matsuura, H./ Satoh, S. (1994): Component part commonality and process flexibility effects on manufacturing perfomance, in: International Journal of Production Research, Vol. 32, No. 10, S. 2479–2493.
van Donselaar, K./ Wijngaard, J. (1987): Commonality and Safety Stocks, in: International Journal of Production Economics, Vol. 12, Issue 1–4, S. 197–204.
van Houtum, G. J./Inderfurth, K./Zijm, W. H. M. (1996): Materials coordination in stochastic multi-echelon systems, in: European Journal of Operational Research, No. 95, S. 1-23.
van Veen, E. A. (1992): Modelling product structures by generic bills-of-material, Amsterdam.
van Veen, E. A./ Wortmann, J.C.(1987): Generic Bills of Material in Assemble-to-Order Manufacturing, in: International Journal of Production Research, Vol. 25, No. 11, S. 1645–1658.
Vollmann, T. E./ Berry, W. L./ Whybark, D. C. (1988): Manufacturing Planning and Control Systems, Homewood, IL, Dow Jones Irwin.
Vollmann, T. E./Berry, W. L./Whybark, D. C. (1997): Manufacturing Planning and Control Systems, 4. Auflage, New York u. a.
Walleigh, R. (1989): Product Design for Low-Cost Manufacturing, in: The Journal of Business Strategy, July–August, S. 37-41.
Wemmerlöv, U. (1984): Assemble-to-Order Manufacturing: Implications for Materials Mangement, in: Journal of Operations Management, Vol. 4, No. 4, August 1984, S. 347–368.
Wight, O. (1984): MRP II — Unlocking America’s Productivity Potential, Essex Junction, VT, Oliver Wight Limited Publications, Essex Junction, VT.
Wijngaard, J./Wortmann, J.C. (1985): MRP and inventories, in: European Journal of Operational Research, No. 20, S. 281-293.
Wirth, N. (1996): Algorithmen und Datenstrukturen mit Modula-2, 5. durchges. Auflage, Stuttgart.
Wright, J. R. et al. (1993): A Knowledge-Based Configurator that Supports Sales, Engineering, and Manufacturing at AT&T Network Systems, in: AI Magazine, Vol. 14, No. 3, S. 69–80.
Yu, B./ Skovgaard, H. J. (1998): A Configuration Tool to Increase Product Competitiveness, in: IEEE Intelligent Systems & their Applications, Vol. 13, No. 4, S. 34–41.
Zäpfel, G. (1982): Produktionswirtschaft, Berlin — New York.
Zäpfel, G. (1989a): Strategisches Produktionsmanagement, Berlin — New York.
Zäpfel, G. (1989b): Taktisches Produktionsmanagement, Berlin — New York.
Zäpfel, G. (1996): Grundzüge des Produktions-und Logistikmanagements, Berlin — New York.
Zhang, A. X. (1997): Demand Fulfillment Rates in an Assemble-To-Order System with Multiple Products and Dependent Demands, in: Production an Operations Management, Vol. 6, No. 3, S. 309–324.
Zhao, X./ Lee, T. S. (1993): Freezing the Master Production Schedule for Material Requirements Planning Systems under Demand Uncertainty, in: Journal of Operations Management, Vol. 11, No. 2, S. 185–205.
Zimmermann, G. (1988): Produktionsplanung variantenreicher Erzeugnisse mit EDV, Springer-Verlag, Berlin — Heidelberg — New York.
Rights and permissions
Copyright information
© 2002 Springer Fachmedien Wiesbaden
About this chapter
Cite this chapter
Hinterberger, G. (2002). Literaturverzeichnis. In: Materialbedarfsplanung bei variantenreicher Produktion. Deutscher Universitätsverlag, Wiesbaden. https://doi.org/10.1007/978-3-663-07941-5_7
Download citation
DOI: https://doi.org/10.1007/978-3-663-07941-5_7
Publisher Name: Deutscher Universitätsverlag, Wiesbaden
Print ISBN: 978-3-8244-7575-9
Online ISBN: 978-3-663-07941-5
eBook Packages: Springer Book Archive