Zusammenfassung
Metalle und ihre Legierungen sind die wichtigsten unter den heute konstruktiv verwendeten hochfesten Werkstoffen. Sie lassen sich sowohl mit hoher als auch mit weniger hoher Festigkeit leicht herstellen, und die Festigkeitswerte lassen sich durchweg gut reproduzieren. Austenitischer (kubisch flächenzentrierter) rostfreier Stahl ist als Behälterwerkstoff für flüssiges Helium bei Temperaturen nahe am absoluten Nullpunkt anwendbar. Ein ganz ähnlicher Werkstoff kann Spannungen von 14,5 kp/mm2 bei Temperaturen oberhalb 500 °C länger als 100 Stunden aushalten.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur
Conrad, H., in: The Relation between the Structure and Mechanical Properties of Metals, S. 476, H.M.S.O., London, 1963.
Inman, M. C., and H. R. Hipler, Metall. Rev. 8, 105 (1963).
Nock, J. A., Jr. and H. Y. Hunsicker, J. Metals 15, 216 (1963).
Hahn, G. T., B. L. Averbach, W. S. Owen and M. Cohen in: Fracture (Herausgeber B. L. Averbach et al.), S. 91, Wiley, New York, (1959).
Irwin, G. R., Trans. ASM 40, 147 (1948).
Orowan, E., Rep. Progr. Phys. 12, 185 (1949).
Irwin, G. R., and A. A. Wells, Metall. Rev. 10, 223 (1965).
Cottrell, A. H., Proc. R. Soc. A276, 1 (1963).
Armstrong, R., I. Codd, R. M. Douthwaite and N. J. Petch, Phil. Mag. 7, 45 (1962).
Petch, N. J., Phil. Mag. 3, 1089 (1958).
Cottrell, A. H., Trans. Am. Inst. Min. metall. PetroL Engrs 212, 142 (1958).
Fleischer, R. L., and W. L. Hibbard, Jr., in: The Relation between the Structure and Mechanical Properties of Metals, S. 262, H.M.S.O., London, 1963.
Kelly, A., and R. B. Nicholson, Prog. mater. Sci. 10, 149 (1963).
Mott, N. F., and F. R. N. Nabarro in: Rep. Conf. Strength of Solids, S. 1, Physical Society, London, 1948.
Orowan, E., in: Symposium on Internal Stresses in Metals and Alloys, S. 451, Institute of Metals, London, 1948.
Cottrell, A. H., and B. A. Bilby, Proc. phys. Soc. A62, 49 (1949).
Mott, N. F., in: Imperfections in Nearly Perfect Crystals (Herausgeber W. Shockley), S. 173, Wiley, New York, 1950.
Friedel, J., Dislocations, Pergamon Press, Oxford, 1964.
Cochardt, A. W., G. Schoek and H. Wiedersich, Acta metall. 3, 533 (1955).
Saxl, I., Czech. J. Phys. B14, 381 (1964).
Winchell, P. G., and M. Cohen, Trans. ASM 55, 347 (1962).
Byrne, G. J., M. E. Fine and A. Kelly, Phil. Mag. 6, 1119 (1961).
Kelly, A., and M. E. Fine, Acta metall. 5, 365 (1957).
Hirsch, P. B., and A. Kelly, Phil. Mag. 12, 881 (1965).
Kennedy, A. J., Processes of Creep and Fatigue in Metals, S. 306, Oliver and Boyd, Edinburgh, 1962.
Wadsworth, N. J., in: Internal Stresses and Fatigue in Metals (Herausgeber G. M. Rassweiler and W. L. Grube), S. 382, Elsevier, Amsterdam, 1959.
Capus, J. M., and G. Mayer, J. Iron Steel Inst. 196, 149 (1960).
Meson, E., The Development and Application of Very Strong Steels. Ministry of Defence Inter-Service Metallurgical Research Council Publication, ISMET 3452, H.M.S.O., London, 1965.
Shyne, J., V. Zackay and D. Schmatz, Trans. ASM 52, 346 (1960).
Owen, W. S., Proc. R. Soc. A282, 79 (1964).
Thomas, G., D. Schmatz and W. Gerberich in: High Strength Materials (Herausgeber V. Zackay), S. 251, Wiley, New York, 1965.
Decker, R. F., in: The Relation between the Structure and Mechanical Properties of Metals, S. 648, H.M.S.O., London, 1963.
Speich, G. R., Trans. Am. Inst. Min. metall. Petrol. Engrs 227, 1426 (1963).
Embury, J. D., and R. M. Fisher, Acta metall. 14, 147 (1966).
Speich, G. R., and R. A. Orfani, Trans. Am. Inst. Min. metall. Petrol. Engrs 233, 623 (1965).
Decker, R. F., and R. R. DeWitt, J. Metals 17, 139 (1965).
Bloch, E. A., Metall. Rev. 6, 193 (1961).
Preston, O., and N. J. Grant, Trans. Am. Inst. Min. metall. Petrol. Engrs 221, 164 (1961).
Alexander, G. B., and W. M. Pasfield, U. S. Patent 301, 9013, 1961.
Worn, D. K., and S. F. Marton in: Powder Metallurgy (Herausgeber W. Leszynski), S. 309, Inter-science, New York, 1961.
von Heimendahl, M., and G. Thomas, Trans. Am. Inst. Min. metall. Petrol. Engrs 230, 1520 (1964).
Dean, A. V., J. Inst. Metals 95, 79 (1967).
Ashby, M., Z. Metallk. 55, 5 (1963).
Lewis, M. H., and J. W. Martin, Acta metall. 11, 1207 (1963).
Kelly, A., Proc. Roy. Soc. A282, 63 (1964).
Wilson, D. V., Trans. ASM 47, 321 (1955).
Webb, W W, and W D. Forgeng, Acta metall. 6, 462 (1958).
Herzberg, R. W, and R. W. Kraft, Trans. Am. Inst. Min. metall. Petrol. Engrs 227, 580 (1963).
Cottrell, A. H., Proc. R. Instn Gt Br. 38, 346 (1960).
Rights and permissions
Copyright information
© 1973 Springer Fachmedien Wiesbaden
About this chapter
Cite this chapter
Kelly, A. (1973). Hochfeste Metalle. In: Werkstoffe hoher Festigkeit. Werkstoffkunde, vol 4. Vieweg+Teubner Verlag, Wiesbaden. https://doi.org/10.1007/978-3-663-01950-3_5
Download citation
DOI: https://doi.org/10.1007/978-3-663-01950-3_5
Publisher Name: Vieweg+Teubner Verlag, Wiesbaden
Print ISBN: 978-3-663-01951-0
Online ISBN: 978-3-663-01950-3
eBook Packages: Springer Book Archive