Zusammenfassung
Polymer Elektrolytmembran Brennstoffzellen (PEFC) sind vielseitig anwendbare Stromerzeuger zum Beispiel für Fahrzeuge wie PKW und Busse, Flurförderzeuge, netzunabhängige und unterbrechungsfreie Stromversorgungen sowie für die Kraft-Wärme-Kopplung. In diesem Kapitel wird eine kurze Einführung zur grundlegenden Arbeitsweise von PEFC, sowie zu den verwendeten Materialien und Komponenten gegeben.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Literatur
Merle, G., Wessling, M., Nijmeijer, K.: J. Memb. Sci. 377, 1–35 (2011)
Couture, G., Alaaeddine, A., Boschet, F., Ameduri, B.: Prog. Polym. Sci. 36, 1521–1557 (2011)
Merlo, L., Ghielmi, A., Arcella, V.: In: Garche, J. (Hrsg.) Encyclopedia of Electrochemical Power Sources. vol. 2, S. 680-699, (2014). revised 2014 doi: 10.1016/B978-044452745-5.00930-8
A.B. Bocarsly, E.V. Niangar: In: Garche, J. (Hrsg.), Encyclopedia of Electrochemical Power Sources. vol. 2, S. 724–733 (2009), revised 2013 doi: 10.1016/B978-044452745-5.00232-X
Yandrasits, M., Hamrock. S.: Polymer Science: A comprehensive review, vol. 10. (2012). doi: 10.1016/B978-0-444-53349-4.00283-1601-619
Heinzel, A., Bandlamudi, G., Lehnert, W.: Reference Module in Chemistry, Molecular Science and Chemical Engineering. (2014). http://dx.doi.org/10.1016/B978-409547-2.11192-8, Zugegriffen Dez. 2014
Barbir, F.: PEM Fuel Cells, Theory and Practice, 2. Aufl. Elsevier Academic Press, Burlington MA (2013)
Alberti, G.: In: Garche, J. (Hrsg.) Encyclopedia of Electrochemical Power Sources. vol 2, S. 650–666. Elsevier (2009)
Sanchez, J.-Y., Iojoiu, C., Alloin, F., Guindet, J., Leprêtre, J.-C.: In: Garche, J. (Hrsg.), Encyclopedia of Electrochemical Power Sources. vol. 2, S. 700–715. (2009). revised 2014 doi: 10.1016/B978-044452745-5.00887-X
Zhang, J.: PEM Fuel Cells, Theory and Practice. Springer, London (2008)
Mauritz, K.A., Moore, R.B.: Chem. Rev. 104, 4535–4585 (2004)
Hsu, W.Y., Gierke, T.D.: Perfluorinated ionomer membranes, Chap.13 In: Eisenberg, A., Yeager, H.L. (Hrsg.) ACS Symposium Series No. 180. American Chemical Society, Washington DC (1982)
Hsu, W.Y., Gierke, T.D.: J. Membr. Sci. 13, 307 (1983)
Kreuer, K.D.: Chem. Mater. 26, 361–380 (2014)
Gebel, G.: Polymer 41, 5829 (2000)
Zawodzinski, T.A., Deroin, C., Radzinski, S., Sherman, R.J., Smith, V.T., Springer, T.E., Gottesfeld, S.: J. Electrochem. Soc. 140, 1041–1047 (1993)
Bass, M., Freger, V.: Polymer 49, 497–506 (2008)
Vallieres, C., Winkelmass, D., Roizard, D., Favre, E., Scharfer, P., Kind, M.: J. Membr. Sci. 278, 357–364 (2006)
Jeck, S., Scharfer, P., Kind, M.: J. Memb. Sci. 373, 74–79 (2011)
LaConti, A.B., Hamdan, M., McDonal, R.C.: In: Vielstich, W., Lamm, A., Gasteiger, H. (Hrsg.), Handbook of Fuel Cells: Fundamentals, Technology And Applications. vol. 3. Wiley, New York (2003)
Liu, H., Gasteiger, H.A., LaConti, A.B., Zhang, J.: ECS Transactions 1, 283–293 (2006)
Cipolini, N.E.: ECS Trans. 11, 1071–1082 (2007)
Prabhakaran_V, Arges, C.G., Ramani, V.: PNAS 109, 1029–1034 (2012)
D’Urso, C., Oldani, C., Baglio, V., Merlo, L., Aricò, A.S.: J. Power Sources 272, 753–758 (2014)
Zhu, Y., Pei, S., Tang, J., Li, H., Wang, L., Yuan, W.Z., Zhang, Y.: J. Membr. Sci. 432, 66–72 (2013)
Gottesfeld, S.: In: Koper, M.T.M. (Hrsg.), Fuel Cell Catalysis, a Surface Science Approach. S. 1–30. Wiley, Hoboken (2009)
Petrow, H.G., Allen, R.J.: U.S. Patent No. 4 044 193 (1977)
Raistrick, I.: Diaphragms. Separators Ion Exch. Membr. 86, 172–178 (1986)
Wilson, M.S., Gottesfeld, S.: J. Electrochem. Soc. 139, L28–L30 (1992)
Springer, T.E., Wilson, M.S., Gottesfeld, S.: J. Electrochem. Soc. 140, 3513–3526 (1993)
Mukerjee, S., Srinivasan, S.: J. Electroanal. Chem. 357, 201–224 (1993)
Mukerjee, S., Srinivasan, S., Soriaga, M.P., McBreen, J.: J. Electrochem. Soc 142, 1409–1422 (1995)
Zhang, J., Mo, Y., Vukmirovic, M.B., Klie, R., Sasaki, K., Adzic, R.R.: J. Phys. Chem B 108, 10955–10964 (2004)
Stahl, J.B., Debe, M.K., Coleman, P.L.: J. Vac. Sci. Techno. A 14, 1761–1765 (1996)
Sheng, W., Gasteiger, H.A., Shao-Horn, Y.: J. Electrochem. Soc. 157, B1529–B1536 (2010)
Nørskov, J.K., Bligaard, T., Logadottir, A., Kitchin, J.R., Chen, J.G., Pandelov, S., Stimming, U.: J. Electrochem. Soc. 152, J23 (2005)
Markovic, N.M., Ross Jr P.: In: Wiekowski, A. (Hrsg.), Interfacial Electrochemistry: Theory, Experiment and Applications. S. 821–842. Marcel Dekker, New York (1999)
Kongkanand, A., Mathias, M.F.: J. Phys. Chem. Lett. 7, 1127–1137 (2016)
Borup, R., et al.: Chem Rev. 107, 3904–3951 (2007)
Yang, D., Ma, J., Quiao, J.: In: Li, H., Knights, S., Shi, Z., van Zee, J.W., Zhang, J. (Hrsg.), Proton Exchange Membrane Fuel Cells, Contamination and Mitigation Strategies. S. 115–150. CRC Press, Boca Raton (2010)
Oetjen, H.F., Schmidt, V.M., Stimming, U., Trily, F.: J. Electrochem. Soc. 143, 3838–3842 (1996)
Yang, C., Costamagna, P., Srinivasan, S.: J. Power Sources 103, 1–9 (2001)
Gottesfeld, S., Pafford, J.: J. Electrochem. Soc. 135, 2651–2652 (1988)
Carette, L.P.L., Friedrich, K.A., Huber, M., Stimming, U.: Phys. Chem. Chem Phys. 3, 320–324 (2001)
Ralph, T.R., Hogarth, M.P.: Platin. Met. Rev. 46, 117–135 (2002)
Cheng, X., Shi, Z., Glass, N., Zhang, L., Zhang, J., Song, D., Liu, Z.-S., Wang, H., Shen, J.: J. Power Sources 165, 739–756 (2007)
Imamura, D., Hashimasa, Y.: ECS Trans. 11, 853–862 (2007)
Soto, H.J., Lee, W.K., van Zee, J.W., Murthy, M.: Electrochem. Solid-State Lett. 6, A133–A135 (2003)
Halseid, R., Heinen, M., Jusys, Z., Behm, R.J.: J. Power Sources 176, 435–443 (2008)
Halseid, R.: J. Electrochem. Soc. 151, A381–A388 (2004)
Markovic, N.M., Schmid, T.J., Stamenkovic, V., Ross, P.N.: Fuel Cells 1, 105–116 (2001)
Yuan, X.Z., Li, H., Yu, Y., Jiang, M., Quian, W., Zhang, S., Wang, H., Wessel, S., Cheng, T.T.H.: Int. J. Hydrogen Energy 37, 12464–12473 (2012)
Xu, Y., Shao, M., Mavriakakis, M., Adzic, R.R.: In: Koper, M.T.M. (Hrsg.) Fuel Cell Catalysis, a Surface Science Approach., S. 271–315. Wiley, Hoboken (2009)
Bezerra, C.W.B., et al.: J. Power Sources 173, 891–908 (2007)
Atanasoski, R., Dodelet, J.P.: In: Garche, J. (Hrsg.) Encyclopedia of Electrochemical Power Sources. S. 639–649. Elsevier (2009)
Serov, A., Tylus, U., Artyushkova, K., Mukerjee, S., Atanassov, P.: Applied Catalysis B 150–151, 179–186 (2014)
Shen, P.K.: In: Zhang, J. (Hrsg.), PEM Fuel Cell Electrocatalysts and Catalyst layers, Fundamentals and Applications. S. 355–380. Springer, London (2008)
Loez-Haro, M., Guétaz, L., Printemps, T., Morin, A., Escribano, S., Jouneau, P.-H., Bayle-Guillemaud, P., Chandezon, F., Gebel, G.: Nature Communications (2014). doi:10.1038/ncomms6229
Morawietz, T., Handl, M., Simolka, M., Friedrich, K.A., Hiesgen, R.: ECS Transactions 68, 3–12 (2015)
Holdcroft, S.: Chem. Mater. 26, 381–393 (2014)
Eikerling, M.H., Malek, K., Wang, Q.: In: Zhang J. (Hrsg.), PEM Fuel Cell Electrocatalysts and Catalyst Layers, Fundamentals and Applications. S. 381–446. Springer, London (2008)
Wagner, F.T., Lakshmanan, B., Mathias, M.F.: J. Phys. Chem. Lett. 1, 2204–2219 (2010)
Debe, J.: Electrochem. Soc. 160, F522–F534 (2013)
Kongskanand, A., Owejean, J.E., Moose, S., Dioguardi, M., Biradar, M., Makkaria, R.: J. Electrochem. Soc. 159, F676–F682 (2012)
Kundu, S., Cimenti, M., Lee, S., Bessarabov, D.: Membrane Technology 10, 7–10 (2009)
Reiser, C.A., Bregoli, L., Patterson, T.W., Yi, J.S., Yang, J.D., perry, M.L., Jarvi, T.D.: Electrochem. Solid State Lett. 8, A273–A276 (2005)
Gu, W., Carter, R.N., Yu, P.T., Gasteiger, H.A.: ECS Trans. 11, 963–973 (2005)
Klages, M., Enz, S., Markötter, H., Manke, I., Scholta, J.: J. Power Sources 239, 596–603 (2013)
Manke, I., Hartnig, C., Grünerbel, M., lehnert, W., kardjilov, K., Haibel, A., Hilger, A., Banhart, J., Riesemeier, H.: Appl. Phys. Lett. 90, 174105-174105-3 (2007)
Hartnig, C., Manke, I., Kuhn, R., Kardjilov, N., Banhart, J., Lehnert, W.: Appl. Phys. Lett. 92, 134106-1–134106-3 (2008)
Markötter, H., Haussmann, J., Alink, R., Tötzke, C., Arlt, T., Klages, M., Riesemeier, H., Gerteisen, D., Banhart, J., Manke, I.: Electrochemistry Communications 34, 22–24 (2013)
Alink, R., Haussmann, J., Markötter, H., Schwager, M., Manke, I., Gerteisen, D.: J. Power Sources 233, 358–368 (2013)
Krüger, Ph, Markötter, H., Haussmann, J., Klages, M., Arlt, T., Banhart, J., Hartnig, C., Manke, I., Scholta, J.: J. Power Sources 196, 5250–5255 (2011)
James, B.D., Huya-Kouadio, J.M., Houchins, C.: Mass Production Cost Estimation of Direct H2 PEM Fuel Cell Systems for Transportation Applications, 2015 Update, Startegic Analysis Inc. (2015)
Bloomfield, D., Bloomfield, V.: In: White, R.E., Vayenas, C.G. (Hrsg.), Modern Aspects of Electrochemistry.vol. 40, S. 1–33. Springer, London (2007)
Cheng, T.: In: Wilkinson, D.P., Zhang, J., Hui, R., Fergus, J., Li, X. (Hrsg.), Proton Exchange Membrane Fuel Cells: Materials Properties and Performances. S. 305–342. CRC Press, Boca Raton (2010)
Kumar, A., Reddy, R.G.: Fundamentals of Advanced Materials and Energy Conversion Proceedings. In: Chandra, D., Bautista, R.G. (Hrsg.), S. 41–53. TMS, Seattle WA (2002)
Yuan, X.Z., Wang, J., Zhang, J.J.: Journal of New Materials for Electrochemical Systems 8, 257–267 (2005)
Karimi, S., Fraser, N., Roberts, B., Foulkes, F.R.: Advances in Materials Science and Engineering (2012). doi:10.1155/2012/828070
http://www.decode-project.eu. Zugegriffen Mai 2013
Mawdsley, J.R., Carter, J.D., Wang, X., Niyogi, S., Fan, C.Q., Koc, R., Osterhout, G.: J. Power Sources 231, 106–112 (2013)
Frisch, L.: Sealing Technology 93, 7–9 (2001)
Ye, D.H., Zhan, Z.G.: J. Power Sources 231, 285–292 (2013)
St-Pierre, J.: In: Garche, J. (Hrsg.), Encyclopedia of Electrochemical Power Sources. S. 879–889. Elsevier (2009)
Tan, J., Chao, Y.J., Wang, H., Gong, J.: J.W. vanZee. Polym. Degrad. Stab. 94, 2072–2078 (2009)
Tan, J., Chao, Y.J., Li, X., van Zee, J.W.: J. Power Sources 172, 782–789 (2007)
Schulze, M., Knöri, T., Schneider, A., Gülzow, E.: J. Power Sources 127, 222–229 (2004)
Wu, J., Yuan, X.Z., Martin, J.J., Wang, H., Zhang, J., Shen, J., Wu, S., Merida, W.: J. Power Sources 184, 104–119 (2008)
http://www.hydrogen.energy.gov/pdfs/review10/fc018_james_2010_o_web.pd. Letzter Zugegriffen: Dez. 2016
James, B.D., Moton, J.M., Colella, W.G.: Mass Production Cost Estimation of Direct H2 PEM Fuel Cell Systems for Transportation Applications 2013 Update, http://energy.gov/sites/prod/files/2014/11/f19/fcto_sa_2013_pemfc_transportation_cost_analysis.pdf. Letzter Zugegriffen: Dez. 2016
http://autostack.zsw-bw.de. Letzter Zugegriffen: Dez. 2016
Kordesch, K., Cifrain, M.: In: Vielstich, W.,Lam, A., Gasteiger, H.A. (Hrsg.), Handbook of Fuel Cells, Fundamentals, Tchnology and Applications. S. 789–793. Wiley, Chichester (2003)
www.gencellenergy.com. Letzter Zugegriffen: Dez. 2016
http://project-power-up.eu/ Letzter Zugegriffen: Dez. 2016
http://www.bluegen.de/de/produkte/bluegen/was-ist-bluegen/. Letzter Zugegriffen: Dez. 2016
http://www.bloomenergy.com/fuel-cell/energy-server/. Letzter Zugegriffen: Dez. 2016
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer-Verlag GmbH Deutschland
About this chapter
Cite this chapter
Jörissen, L., Garche, J. (2017). Polymerelektrolytmembran-Brennstoffzellen (PEFC) Stand und Perspektiven. In: Töpler, J., Lehmann, J. (eds) Wasserstoff und Brennstoffzelle. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-53360-4_14
Download citation
DOI: https://doi.org/10.1007/978-3-662-53360-4_14
Published:
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-662-53359-8
Online ISBN: 978-3-662-53360-4
eBook Packages: Computer Science and Engineering (German Language)