Abstract
Equipments are often broken because of the friction and wear of bearing under the condition of high speed, high temperature, and heavy load.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Harris TA (1991) Rolling bearing analysis, 3rd edn. John Wiley and Sons Inc, New York, United States
Cousseau T, Graca B, Campos A et al (2010) Friction torque in grease lubricated thrust ball bearings. Tribol Int 10:102–111
Zhu K (2004) Development on friction torque measuring instrument with paired angular contact bearing. Hefei University of Technology, Hefei
Zhao J (2006) Research on miniature bearing friction torque testing. Shanghai Jiaotong University, Shanghai
Wen S, Huang P (2008) Tribology principles. Tsinghua University Press, Beijing
Yang H, Zhou J (1998) Research on testing method and testing device for wear in large self-aligning bearing. Mech Sci Technol 17:149–151
Sauvage T, Lacroix O (1998) Implantation of 7 Be radioactive tracer for wear measurements of polymers. Beam Interact Mater Atoms 143:397–402
Scherge M, Pöhlmann K, Gervé A (2003) Wear measurement using radionuclide-technique (RNT). Wear 254:801–817
Dwyer-Joyce RS (1999) Predicting the abrasive wear of ball bearings by lubricant debris. Wear 235:692–701
Yamaguchi T, Iwai Y, Inagaki S et al (2003) A method for detecting bearing wear in a drain pump utilizing an eddy-current displacement sensor. Measurement 33:205–211
Liu Y, Wang H, Chen J et al (2005) Research on on-line inspection method for wear. Lubr Eng 3:72–73
Qiu M, Zhang Y (2006) Influence of the friction heat on Ti6Al4V friction and wear. Tribology 26(3):203–207
Qiu M, Zhang Y, Zhu J et al (2006) The effect of dynamic frictional heating on the dry sliding behaviors of M2 steel against GCr15 steel. Wear 261:767–772
Qiu M, Zhang YZ, Shangguan B et al (2007) The relationships between tribological behaviour and heat-transfer capability of Ti6Al4V alloys. Wear 263:653–657
Qiu M, Zhang Y, Zhu J (2007) Effect of friction heat on tribological behaviour of M2 steel against GCr15 steel in dry sliding systems. J Univ Sci Technol Beijing 14(6):512–516
Wang J (2004) Research and present situation of temperature in rolling bearing. In: The 7th national conference on friction, wear, resistance, anti-friction material and technology academic, 237–242
Nagaraj S, Sanborn M (1978) Direct surface temperature measurement by infrared radiation in elastohydro dynamic contacts and the correlation with Blok flash temperature theory. Wear 49:43–59
Shen JH, Ettles CM (1989) The analysis of thermoelectric signals in metallic sliding. ASME J Tribol 111:114–120
He Y, Wang S (2004) Photoelectric sensor and application. Chemical Industry Press, Beijing
Zhang M (1991) Fiber optic temperature measurement method and application. Vac Electron 2:170–177
Tanahashi K, Yamato Laboratory, Yamamoto T (1998) Traction control of friction slider pair under a boundary lubrication condition. Surf Coat Technol 100–101:260–263
Yang B, Zheng P (1995) Development on drag testing machine of high speed elastohydrodynamic lubricating oil with static bearing. In: The third session of the national youth tribology conference proceedings, Luoyang, Mechanical science and technology, 237–240
Yang B, Zheng P, Su B (2002) Elastohydrodynamic drag characteristics on high-speed grease. Eng Sci 4(4):75–82
Xie J, Wu H, Chen D (2008) High speed friction and wear testing machine. Lubr Eng 33(5):96–99
Xiang X, Gu J, Song X (2005) Development of the overloading sliding friction tester. Mech Electr Eng Technol 34(12):53–55
Qiu M, Yin Y, Wang G (2011) A composite swing joint bearing testing machine. CN: 2010200522657.1, 02
Qiu M, Gao Z, Yao S, Chen L (2011) Effects of oscillation frequency on the tribological properties of self-lubrication spherical plain bearings with PTFE woven liner. Key Eng Mater 455:406–410
Li R, Yin Z, Jia H (2008) Insert ball bearing life test machine. Bearing 6:40–41
Li X, Zhang Y, Lu S (2006) ABFT-1 car wheel hub bearing friction torque tester. Bearing 2:34–35
Ku B, Park Y, Sung C et al (2010) Comparison of tribological characteristics between aluminum alloys and polytetrafluoroethylene composites journal bearings under mineral oil lubrication. J Mech Sci Technol 24(8):1631–1635
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2017 National Defense Industry Press, Beijing and Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Qiu, M., Chen, L., Li, Y., Yan, J. (2017). Friction and Wear Testing Technology in the Bearing. In: Bearing Tribology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-53097-9_8
Download citation
DOI: https://doi.org/10.1007/978-3-662-53097-9_8
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-53095-5
Online ISBN: 978-3-662-53097-9
eBook Packages: EngineeringEngineering (R0)