Zusammenfassung
Kap. 7 fasst die durchgeführten Forschungsarbeiten zur Geometrieerfassung zusammen. Hierzu werden Ansätze zur automatisierten Analyse und Auswertung von Punktewolken aus 3D-Messdaten gezeigt. Basierend auf diesen Daten wurden Algorithmen zur Objekterkennung entwickelt. Diese werden für einen weitgehend automatisierten Abgleich von realen und virtuellen Modellen genutzt.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Literatur
Luhmann, T.: Nahbereichsphotogrammetrie. Wichmann, Heidelberg, 2000.
Chen, F.; Brown, G M.; Song, M.: Overview of the three-dimensional shape measurement using optical methods. Opt. Eng., 39(1):10–22, 2000.
Kern, F: Automatisierte Modellierung von Bauwerksgeometrien aus 3D-Laserscanner-Daten. Dissertation. TU Braunschweig, 2003.
Levoy, M.; Pulli, K.; Curless, B.; Rusinkiewicz, S.; Koller, D.; Pereira, L.; Ginzton, M.; Anderson, S.; Davis, J.; Ginsberg, J.; Shade, J.; Fulk, D.: The Digital Michelangelo Project: 3D Scanning of Large Statues. In: Akeley, Kurt (Hrsg.): Proc. SIGGRAPH 2000, S. 131–144. ACM SIGGRAPH, Addison Wesley, 2000.
Bernardini, F.; Martin, I.; Mittleman, J.; Rushmeier, H.; Taubin, G.: Building a Digital Model of Michelangelo’s Florentine Pietà. IEEE Computer Graphics & Applications, 22(1):59–67, Januar 2002.
Bernardini, F.; Rushmeier, H.: The 3D Model Acquisition Pipeline. Computer Graphics Forum, 21(2):149–172, Juni 2002.
Böhler, W.; Heinz, G.; Marbs, A.; Siebold, M.: 3D Scanning Software: An Introduction. In: Proc. Int. Workshop on Scanning for Cultural Heritage Recording (Corfu, Greece, September 1–2, 2002), S.42–47. Int. Soc. for Photogrammetry and Remote Sensing, 2002.
Cyr, C. M.; Kimia, B. B.: 3D object recognition using shape similarity-based aspect graph. In: Proc. ICCV 2001, S. 254–261, 2001.
Kostiainen, T.; Kalliomaeki, I.; Tamminen, T.; Lampinen, J.: 3D object recognition based on hierarchical eigen shapes and Bayesian inference. In: Casasent, D. P. und E. L. Hall (Hrsg.): Proc. SPIE Intell. Robots and Computer Vision XX: Algorithms, Techn., and Active Vision, Band 4572, S. 165–173, 2001.
Moreno, A. B.; Sanchez, A.; Velez, J.; Diaz, J.: Face Recognition using 3D local geometric features: PCA vs. SVM. In: Proc. 4th Int. Conf. Image and Signal Processing and Analysis (ISPA), 2005.
Dey, T. K.; Giesen, J.; Goswami, S.: Shape Segmentation and matching from noisy point clouds. In: ALEXA, M. und S. RUSINKIEWICZ (Hrsg.): Eurographics Sympos. Point-Based Graphics, S. 193–199, 2004.
Hough, P. V. C.: Method and means for recognizing complex patterns. US Patent Nr. 3069654. 1962.
Ballard, D. H.: Generalizing the Hough transform to detect arbitrary shapes. In: Pattern Recognition 13 (1981), Nr. 2, S. 111–122.
Borgefors, G.: Hierarchical Chamfer Matching: A Parametric Edge Matching Algorithm. PAMI (10), Nr. 6, S. 849–865, 1988.
Harris, C.; Stephens, M.: A combined corner and edge detector. Fourth Alvey Vision Conference, Manchester, UK, S. 147–155, 1988.
Schmid, C.; Mohr, R.: Local grayvalue invariants for image retrieval. IEEE Trans. on Pattern Analysis and Machine Intelligence, 19(5), S. 31–50, 1997.
Loewe, D.G.: Object recognition from local scale invariant features. International Conference on Computer Vision, Corfu, GR, 1999.
Wuest, H.; Vial, F.; Stricker, D. Adaptive Line Tracking with Multiple Hypotheses for Augmented Reality. Proceedings of the Fourth IEEE and ACM International Symposium on Mixed and Augmented Reality, S. 62–69, 2005.
Dey, T. K.; Giesen, J.; Hudson, J.: Delaunay based shape reconstruction from large data. In: Proc. IEEE Symp. Parallel and Large Data Visualization and Graphics (PVG 2001), S. 19–27, 2001.
Hoppe, H.: Surface Reconstruction from Unorganized Points. Dissertation, University of Washington, 1994.
Amenta, N., Choi, S.; Kolluri, R K.: The power crust, unions of balls, and the medial axis transform. Comput. Geom., Theory and Applications, 19:201–210, 2001.
Dey, T. K.: Sample based geometry modeling. In: Chapter in Geometric and Algorithmic Aspects of Computer-Aided Design and Manufacturing, Band 67 der Reihe Discrete Mathematics and Theoretical Computer Science, 2005.
Kobbelt, L. P.; Botsch, M.; Schwanecke, U.; Seidel, H.-P.: Feature sensitive surface extraction from volume data. In: ACM SIGGRAPH 01, S. 57–66, 2001.
JU, T.; Losasso, F.; Schaefer, S.; Warren, J.: Dual Contouring of Hermite Data. ACM Trans. Graphics (SIGGRAPH 02), 21(3):339–346, 2002.
Bernardini, F.; Mittleman, J.; Rushmeier, H.; Silva, C.; Taubin, G.: The Ball-Pivoting Algorithm for Surface Reconstruction. IEEE Transactions on Visualization and Computer Graphics, 5(4):349–359, 1999.
Eck, M.; Hoppe, H.: Automatic Reconstruction of B-Spline Surfaces of Arbitrary Topological Type. Computer Graphics, 30:325–334, 1996.
Alexa, M.; Behr, J.; Cohen-Or, D.; Fleishman, S.; Levin, D.; Silva, C. T.: Point Set Surfaces. IEEE Visualization 2001, S. 1–28, 2001.
Oliva, A., A. Torralba: The role of context in object recognition. Trends in Cognitive Sciences, vol. 11(12), S. 520–527, 2007.
Trostmann, E.; Teutsch, C.; Berndt, D.: Adaptive pre-processing of large point clouds from optical 3D scanners. In Proc. IADIS Int. Conf. Applied Computing (Oct. 14–16, 2010, Timisoara, Romania), pages 43–52.
David, A.; Ponce, Jean: „Computer Vision: A Modern Approach“, Prentice Hall Professional Technical Reference, 2002.
Z. Zhang: „A flexible new technique for camera calibration“, IEEE Transactions on Pattern Analysis and Machine Intelligence, 22(11):1330-1334, 2000.
Kraus, Karl: „Photogrammetrie, Band 2: Verfeinerte Methoden und Anwendungen“, 3. Auflage, Dümmler/Bonn 1996.
Owens, J. D.; Luebke, David; Govindaraju, Naga; Harris, Marc; Krüger, Jens; Lefohn, Aaron E.; Purcell, Timothy J.: „A Survey of General-Purpose Computation on Graphics Hardware.“ In Eurographics 2005, State of the Art Reports, 2005.
Saito, Takafumi; Takahashi, Tokiichiro: „Comprehensible rendering of 3D shapes.“ In: SIGGRAPH ’90: Proceedings of the 17th annual conference on Computer graphics and interactive techniques. New York, NY, USA: ACM Press, 1990.
Canny, John: „A computational approach to edge detection.“ In: IEEE Transactions on Pattern Analysis and Machine Intelligence 8, 1986.
Pharr, M; Fernando, R.: „Gpu Gems 2: Programming Techniques for High-Performance Graphics and General-Purpose Computation“ Addison-Wesley Professional, 2005.
Gavrila, D.M.:„Multi-Feature Hierarchical Template Matching Using Distance Transforms“. In Proceedings of the 14th International Conference on Pattern Recognition-Volume 1, ICPR 1998.
Hartley, R.I.; Zisserman, A.: „Multiple View Geometry in Computer Vision“ CambridgeUniversity Press, second edn. (2004).
Ruigang Yang Marc, Marc Pollefeys, Sifang Li: „Improved Real-Time Stereo on Commodity Graphics Hardware“ In IEEE Workshop on Real-time 3D Sensors and Their Use (in conjunction with CVPR’04), 2004.
Teutsch, C.; Berndt, D.; Sobotta, A.; Sperling, S.: „A flexible photogrammetric stereo vision system for capturing the 3D shape of extruded profiles.“ In P. S. Huang, editor, Proc. Two- and Three-Dimensional Methods for Inspection and Metrology IV (Optics East 2006, USA), volume 6382. SPIE, 2006.
Sauer, S.: “Optical Metrology and Visualization – for Design, Manufacturing, Quality Assurance.” Workshop “Industrielle Bildverarbeitung und Virtuelle Realität”, GosNIIAS, Moskau, 2008.
Schenk, M.; Grubert, J.; Sauer, S.; Berndt, D.; Mecke, R.: “Augmented Reality basierte Werkerassistenz.” In: Schenk, M. (Hrsg.): HABTagung. (Magdeburg 9.-10. Oktober 2009).
Sauer, S.: “Bildbasiertes Assistenz- und Prüfsystem für manuelle, komplexe Montagetätigkeiten.” In: Fraunhofer Vision Technologietag 2009. (Kaiserslautern 9. Oktober 2009).
Sauer, Steffen; Berndt, Dirk; Niemann, Jörg; Böker, Jörg: “Worker Assistance and Quality Inspection for Manual Mounting Tasks – A Virtual Technology for Manufacture”. In: Lohweg, Volker; Mertsching, Bärbel (Hg.): Bildverarbeitung in der Automation. 1. Jahreskolloquium. BVAu 2010. Lemgo: Institut Industrial IT, 2010.
Bass, L., P. Clements und R. Kazman: Software Architecture in Practice. Amsterdam: Addison-Wesley Longman 2. Aufl., 2003.
Nick, M., K.-D. Althoff und R. Bergmann: Experience Management. In: Künstliche Intelligenz, Ausgabe 2, 2007.
Nick, M.: Experience Maintenance through Closed-Loop Feedback. (PhD thesis, University of Kaiserslautern). Stuttgart: Fraunhofer IRB, 2005.
Oliva, A., A. Torralba: The role of context in object recognition. Trends in Cognitive Sciences, vol. 11(12), S. 520–527, 2007.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer-Verlag GmbH Deutschland
About this chapter
Cite this chapter
Teutsch, C., Sauer, S., Berndt, D., Wessner, M., Schneickert, S. (2016). Teilprojekt TP 5 – Geometrieerfassung. In: Schenk, M., Schumann, M. (eds) Angewandte Virtuelle Techniken im Produktentstehungsprozess. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-49317-5_7
Download citation
DOI: https://doi.org/10.1007/978-3-662-49317-5_7
Published:
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-662-49316-8
Online ISBN: 978-3-662-49317-5
eBook Packages: Computer Science and Engineering (German Language)