Abstract
With the widespread use of DAS, higher requirements for distribution automation terminal on-site testing have been put forward on account of limitations of field working conditions. Based on the requirement of relevant standards, this paper discusses automatic testing exploratory research, by analyzing the principal experimental objects and information transmission mode of the distribution automation terminal, which adopts IEC-60870-5-104 protocol. On this basis, this paper brings forward a set of feasible distribution automation terminal test method based on automatic information acquisition and predefined rules, by scheme design, process design, and building test environment. Finally, based on the test environment which divides into online and offline modes, the relevant automatic testing system has been studied and applied, achieves a fully automated power distribution terminal test process, and improves the efficiency of this test to ensure safe and stable running of power distribution automation terminal.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Feng Q, Mao W (2009) Distribution network automation technology and analysis of engineering example. China Electric Power Press
Chen T, Zhao Z, Chen X, Hu D (2009) Power distribution system and its automation technology. China Electric Power Press
Yang W, Wen M, Zheng Z (2004) The automation of distribution network. China Water Power Press
Liu J, Ni J, Deng Y (2009) Distribution automation system. China Water Power Press
Liu J, Zhao S, Zhang X (2012) Development of distribution automation in China and some suggestions. Autom Electr Power Syst 36(19):6–10, 21
Xu L (2009) Summary of distribution automation network in China. Rural Electrification (3):5–7
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Li, P., Qian, Y., Li, W. (2016). Study on the Distribution Automation System Terminal Automatic Test Method. In: Huang, B., Yao, Y. (eds) Proceedings of the 5th International Conference on Electrical Engineering and Automatic Control. Lecture Notes in Electrical Engineering, vol 367. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-48768-6_2
Download citation
DOI: https://doi.org/10.1007/978-3-662-48768-6_2
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-48766-2
Online ISBN: 978-3-662-48768-6
eBook Packages: EngineeringEngineering (R0)