Advertisement

Equivalent Circuits and Methods to Determine the System Parameters

  • Nguyen Phung QuangEmail author
  • Jörg-Andreas Dittrich
Chapter
Part of the Power Systems book series (POWSYS)

Abstract

For the clear specification of the electromagnetic processes in 3-phase AC machines and as a starting point for control design, equivalent circuits which are based on the representation of the physical quantities as complex space vectors in a stator-fixed coordinate system will be a very useful tool. A first starting-point and also a base for start values of a more exact estimation will be provided by the name plate or by the rated data of the motor. For a more exact parameter setting off-line identification methods which provide estimated values of motor parameters during a test run in standstill are discussed.

Keywords

Equivalent Circuit Excitation Frequency Current Displacement Rotor Resistance Iron Loss 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Baumann T (1997) Selbsteinstellung von Asynchronantrieben. VDI-Fortschritt-Bericht Reihe 21 Nr. 230, VDI Verlag, DüsseldorfGoogle Scholar
  2. Bünte A, Grotstollen H (1995) Offline parameter identification of an inverter-fed induction motor at standstill. In: EPE 1995, Sevilla, pp 3.492–3.496Google Scholar
  3. de Jong HCJ (1980) Saturation in electrical machines. In: Proceedings of the international conference on electrical machines, part 3, Athen, pp 1545–1552Google Scholar
  4. Klaes N (1992) Identifikationsverfahren für die betriebspunktabhängigen Parameter einer wechselrichtergespeisten Induktionsmaschine. VDI-Verlag, DüsseldorfGoogle Scholar
  5. Levi E (1994) Magnetic saturation in rotor-flux-oriented induction motor drives: operating regimes, consequences and open-loop compensation. Eur Trans Electr Power Eng 4(4):277–286Google Scholar
  6. Lunze K (1978) Einführung in die Elektrotechnik. VEB Verlag Technik, BerlinGoogle Scholar
  7. Murata T, Tsuchiya T, Takeda I (1990) Quick response and high efficiency control of the induction motor based on optimal control theory. In: 11. IFAC World Congress, vol 8. Tallin, pp 242–247Google Scholar
  8. Philippow E (1980) Taschenbuch Elektrotechnik, Band 5: Elemente und Baugruppen der Elektroenergietechnik. VEB Verlag Technik, BerlinGoogle Scholar
  9. Quang NP (1996) Digital Controlled Three-Phase Drives. Education Publishing House: Hanoi (book in vietnamese: Điều khiển tự động truyền động điện xoay chiều ba pha. Nhà xuất bản Giáo dục Hà Nội)Google Scholar
  10. Rasmussen H, Tonnes M, Knudsen M (1995) Inverter and motor model adaptation at standstill using reference voltages and measured currents. In: Proceedings EPE 1995, Sevilla, pp 1.367–1.372Google Scholar
  11. Ruff M, Bünte A, Grotstollen H (1994) A new self-commissioning scheme for an asynchronous motor drive system. In: IEEE industry applications society annual meeting, Denver, pp 616–623Google Scholar
  12. Schäfer U (1989) Feldorientierte Regelung einer Asynchronmaschine mit Feldschwächung und Berücksichtigung der Eisensättigung und Erwärmung. Dissertation RWTH AachenGoogle Scholar
  13. Vas P (1990) Vector control of AC machines. Oxford University Press, OxfordGoogle Scholar
  14. Vogt K (1986) Elektrische Maschinen. VEB Verlag Technik Berlin, Berechnung rotierender elektrischer MaschinenGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2015

Authors and Affiliations

  1. 1.Institute for Control Engineering and AutomationHanoi University of Science and TechnologyHanoiVietnam
  2. 2.Enerdrive GmbHZürichSwitzerland

Personalised recommendations