Abstract
This chapter gives a well-rounded presentation of the continuous synthesis of UNCD via laser shock processing (LSP) of graphite particles suspended in water by a Nd:YAG laser system with high power density (109 W/cm2) and short pulse width at room temperature and normal pressure, which yielded the ultra-nano-crystalline diamond in size of about 5 nm. X-ray diffraction, high-resolution transmission electron microscopy, and laser Raman spectroscopy were used to characterize the nano-crystals. The method studied is helpful in understanding the formation mechanism and enhancing the yield rate of nano-diamond.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kitazawa S et al (2005) Formation of nanostructured solid-state carbon particles by laser ablation of graphite in isopropyl alcohol. Solids 66:555
Abbaschian R et al (2005) High pressure-high temperature growth of diamond crystals using split sphere apparatus. Diamond Relat Mater 14:1916
Chen PW et al (2000) Spherical nanometer-sized diamond obtained from detonation. Diamond Relat Mater 9:1722
Wang WL et al (2000) Nucleation and growth of diamond films on aluminum nitride by hot filament chemical vapor deposition. Diamond Relat Mater 9:1660
Yang GW (2007) Pulsed laser ablation and deposition of thin films. Prog Mater Sci 52:648
Sun J et al (2006) Distribution of interleukin-1 receptors in term human fetal membranes and decidua. J Mater Res 20:33
Gao N (2007) Effects of graphite nodules on crack growth behaviour of austempered ductile iron. Powder Metall Thch 25:203
Shen L, Chen Z (2009) A numerical study of the imperfection effect on ultrananocrystalline diamond properties under different loading paths and temperatures. Compos Sci Technol 69:2075
Na C et al (2009) Advanced deposition characteristics of kinetic sprayed bronze/diamond composite by tailoring feedstock properties. Compos Sci Technol 69:463
Ren XD et al (2014) A conversion model of graphite to ultrananocrystalline diamond via laser processing at ambient temperature and normal pressure. Appl Phys Lett 105:021908
Prawer et al (2000) The raman spectrum of nanocrystalline diamond. Chem Phys Lett 332:93
Obraztsova ED et al (1998) Raman-spectroscopy of low-dimensional semiconductors. Carbon 36:821
Fauchet PM, Campbell IH (1988) Raman-spectroscopy of low-dimensional semiconductors. Crit Rev Solid State Mater Sci 14:S79
Richter H et al (1981) Measurements of the melting point of graphite and the properties of liquid carbon. Solid State Commun 39:625
Savvatimskiy AI (2005) Measurements of the melting point of graphite and the properties of liquid carbon (a review for 1963–2003). Carbon 43:1115
Wang JB, Yang GW (1999) Phase transformation between diamond and graphite in preparation of diamonds by pulsed-laser induced liquid-solid interface reaction. J Phys Condens Matter 11:7089
Wang CX et al (2005) Relaxorlike dielectric behavior in Ba0.7Sr0.3TiO3 thin films. J Appl Phys 97:066104
Wang CX, Yang GW (2005) Thermodynamics of metastable phase nucleation on nanoscale. Mater Sci Eng R 49:157
Sun J et al (2006) Ultrafine diamond synthesized by long-pulse-width laser. Appl Phys Lett 89:1831151
Wang CX et al (2005) Nucleation and growth kinetics of nanocrystals formed upon pulsed-laser ablation in liquid. Appl Phys Lett 87:201913
Tian F, Sun J (2009) Time amplifying techniques towards atomic time resolution. Chin J Lasers 1:3039
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2015 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Ren, X. (2015). Conversion Model of Graphite. In: Laser Shocking Nano-Crystallization and High-Temperature Modification Technology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-46444-1_5
Download citation
DOI: https://doi.org/10.1007/978-3-662-46444-1_5
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-46443-4
Online ISBN: 978-3-662-46444-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)