Advertisement

Application of Solid Sorbents for Enrichment and Separation of Platinum Metal Ions

  • Krystyna PyrzynskaEmail author
Chapter
Part of the Environmental Science and Engineering book series (ESE)

Abstract

Determination of platinum metal ions in environmental samples requires very often pre concentration and separation due to the low content of these metals and the high concentration of interfering matrix components. Solid phase extraction technique with different kind of solid sorbents offers for this purpose high enrichment factor, rapid phase separation and the ability of combination with different detection techniques in the form of on-line and off-line mode. The recent developments in this area published over the last 5 years will be presented and discussed.

Keywords

Solid Phase Extraction Imprint Polymer Flame Atomic Absorption Spectrometry Flame Atomic Absorption Spectrometry High Sorption Capacity 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Afzali D, Mostafavi A, Beitollah H (2010) Application of organo-nanoclay as a solid sorbent for rhodium complex separation and preconcentration. Microchim Acta 171:97–102CrossRefGoogle Scholar
  2. Afzali D, Jamshidi R, Ghaseminezhad S, Afzali Z (2012) Preconcentration procedure trace amounts of palladium using multiwalled carbon nanotubes sorbent prior to flame atomic absorption spectrometry. Arab J Chem 5:461–466CrossRefGoogle Scholar
  3. Augusto F, Hantao LW, Mogollón GS, Braga SCG (2013) New materials and trends in sorbents for solid-phase extraction. Trends Anal Chem 43:14–23CrossRefGoogle Scholar
  4. Bagheri A, Taghizadeh M, Behbahani M, Asgharinezhad AA, Salarini M, Dehghani A, Ebrahimizadeh H, Amini MM (2012) Synthesis and characterization of magnetic metal-organic framework (MOF) as novel sorbent, and its optimization by experimental design methodology for determination of palladium in environmental samples. Talanta 99:132–139CrossRefGoogle Scholar
  5. Balcerzak M (2011) Methods for the determination of platinum group elements in environmental and biological matrices. Crit Rev Anal Chem 41:214–255CrossRefGoogle Scholar
  6. Behbahani M, Bagheri A, Gorji T, Nabid MR, Sedghi R, Oskooie HA, Heravi MM (2013) Application of poly (N-phenylethannoloamine) modified MWCNTs as a new sorbent for solid-phase extraction of trace palladium ions in soil and water samples. Sample Prep 1:10–17Google Scholar
  7. Branger C, Meouche W, Margallin A (2013) Recent advances on ion-imprinted polymers. React Funct Polym 73:859–875CrossRefGoogle Scholar
  8. Bystrzejewski M, Pyrzynska K (2013) Enhancing the efficiency of AuCl4− ion removal from aqueous solution using activated carbon and carbon nanomaterials. Mater Chem Phys 141:454–460CrossRefGoogle Scholar
  9. Chen L, Wang T, Tong J (2011) Application of derivatized magnetic materials to the separation and the preconcentration of pollutants in water samples. Trends Anal Chem 30:1095–1108Google Scholar
  10. Choi HC, Shim M, Bangsaruntipb S, Dai H (2002) Spontaneous reduction of metal ions on the sidewalls of carbon nanotubes. J Am Chem Soc 124:9058–9059CrossRefGoogle Scholar
  11. Daniel S, Prem EJ, Prasada Rao T (2005) Preconcentrative separation of palladium using palladium(II) ion-imprinted polymer particles formed with different quinoline derivatives and evaluation of binding parameters based on adsorption isotherm models. Talanta 65:441–452Google Scholar
  12. Daniel S, Praveen RS, Prasada Rao T (2006) Ternary ion-association complex based ion imprinted polymers (IIPs) for trace determination of palladium(II) in environmental samples. Anal Chim Acta 570:79–87Google Scholar
  13. Das D, Gupta U, Das AK (2012) Recent developments in solid phase extraction in elemental speciation of environmental samples with special reference to aqueous solutions. Trends Anal Chem 33:35–45CrossRefGoogle Scholar
  14. Dobrowolski R, Kuryłło M, Reszko-Zygmunt J (2008) Study of the trace palladium enrichment mechanism on modified activated carbons with respect to analytical applications. Polish J Chem 82:255–262Google Scholar
  15. El-Sheikh AH, Al-Jafari MK, Sweileh JA (2012) Solid phase extraction and uptake properties of multi-walled carbon nanotubes of different dimensions towards some nitrophenols and chlorophenols from water. Int J Environ Anal Chem 92:190–209CrossRefGoogle Scholar
  16. Farahani MD, Shemirani F, Gharehbaghi M (2013) Ferro fluid-based dispersive solid extraction of palladium. Talanta 109:121–127CrossRefGoogle Scholar
  17. Ghaseminezhad S, Afzali D, Taher MA (2009) Flame atomic absorption spectrometry for the determination of trace amount of rhodium after separation and pre concentration onto modified multiwalled carbon nanotubes as a new solid sorbent. Talanta 80:168–172CrossRefGoogle Scholar
  18. Godlewska-Żyłkiewicz B (2004) Pre concentration and separation procedures for the spectrochemical determination of platinum and palladium. Microchim Acta 189:189–210CrossRefGoogle Scholar
  19. Godlewska-Żyłkiewicz B, Leśniewska B, Wawreniuk I (2010) Assessment of ion imprinted polymers based on Pd(II) chelate complex for pre concentration and FAAS determination of palladium. Talanta 83:596–604CrossRefGoogle Scholar
  20. Godlewska-Żylkiewicz B, Zambrzycka E, Leśniewska B, Wilczewska AZ (2012) Separation of ruthenium from environmental samples on polymeric sorbent based on imprinted Rh(III)-allyl acetoacetate complex. Talanta 89:352–359CrossRefGoogle Scholar
  21. Godlewska-Żylkiewicz B, Leśniewska B, Wilczewska AZ (2013) Evaluation of ion imprinted polymers for the solid phase extraction and electrothermal atomic absorption spectrometric determination of palladium in environmental samples. Inter J Environ Anal Chem 93:483–498CrossRefGoogle Scholar
  22. Hu J, Pan J, Zhang K, Lian H, Li G (2013) Novel applications of molecularly-imprinted polymers in sample preparation. Trends Anal Chem 43:37–52CrossRefGoogle Scholar
  23. Hubicki Z, Wawrzkiewicz M, Wołowicz A (2008) Application of ion exchange methods in recovery of Pd(II) ions—a review. Chem Anal (Warsaw) 53:759–784Google Scholar
  24. Jia YF, Xiao B, Thomas KM (2002) Adsorption of metal ions on nitrogen surface functional groups in activated carbons. Langmuir 18:470–478CrossRefGoogle Scholar
  25. Kononova ON, Leyman TA, Gavrilova VN, Konontsev SG, Kashirin DM (2010) Sorption of platinum and rhodium on carbon adsorbents from chloride solutions. J Porous Mater 17:351–358CrossRefGoogle Scholar
  26. Leśniewska B, Kosińska M, Godlewska-Żyłkiewicz B, Zambrzycka E, Wilczewska AZ (2011) Selective solid phase extraction of platinum on an ion imprinted polymers for its electrothermal atomic absorption spectrometric determination in environment al samples. Microchim Acta 175:273–282CrossRefGoogle Scholar
  27. Li Y, Huang YF, Jiang Y, Tian BL, Han F, Yan XP (2011a) Displacement solid-phase extraction on mercapto-functionalized magnetite microspheres for inductively coupled plasma mass spectrometric determination of trace noble metals. Anal Chim Acta 692:42–49CrossRefGoogle Scholar
  28. Li D, Chang X, Hu Z, Wang Q, Tu Z, Li R (2011b) Selective solid-phase extraction of Au(III), Pd(II) and Pt(IV) using activated carbon modified with 2,6-diaminopyridine. Microchim Acta 174:131–136CrossRefGoogle Scholar
  29. Li R, He Q, Hu Z, Zhang S, Zhang L, Chang X (2012) Highly selective solid-phase extraction of trace Pd(II) by murexide functionalized halloysite nanotubes. Anal Chim Acta 713:136–144CrossRefGoogle Scholar
  30. López-Lorento AI, Simonet BM, Valcárcel M (2011) Analytical potential of hybrid nanoparticles. Anal Bioanal Chem 399:43–54CrossRefGoogle Scholar
  31. Lucena R, Simonet BM, Cárdenas S, Valcárcel M (2011) Potential of nanoparticles in ample preparation. J Chromatogr A 1218:620–637CrossRefGoogle Scholar
  32. Mladeneva E, Karadjova I, Tsalev DL (2012) Solid-phase extraction in the determination of gold, palladium and platinum. J Sep Sci 35:1249–1265CrossRefGoogle Scholar
  33. Mohammadi SZ, Karimi MA, Hamidian H, Baghelani YM, Karimzadeh L (2011) Determination of trace amounts of Pd(II) and Rh(III) ions in Pt-Ir alloy and road dust samples by flame atomic absorption spectrometry after simultaneous separation and pre concentration on non-modified magnetic nanoparticles. Scientia Iranica 18:1636–1642CrossRefGoogle Scholar
  34. Myasoedova GV, Mokrodoeva OB, Kubrakova IV (2007) Trends in sorption pre concentration combined with noble metal determination. Anal Sci 23:1031–1039CrossRefGoogle Scholar
  35. Perez-Lopez B, Merkoçi A (2012) Carbon nanotubes and grapheme in analytical sciences. Microchim Acta 179:1–16CrossRefGoogle Scholar
  36. Pyrzynska K (2010) Carbon nanostructures for separation, pre concentration and speciation of metal ions. Trends Anal Chem 29:718–727CrossRefGoogle Scholar
  37. Pyrzynska K (2013) Use of nanomaterials in sample preparation. Trends Anal Chem 43:100–108CrossRefGoogle Scholar
  38. Ravelo-Perez LM, Herrera-Herrera AN, Hernadez-Borgez J, Rodrigez-Delgado MA (2010) Carbon nanotubes. Solid-phase extraction. J Chromatogr A 1217:33–42Google Scholar
  39. Simanova SA, Shukarev AV, Lysenko AA, Grebennikov SF, Astashkina OV (2008) Adsorption of palladium, platinum, and gold chloride complexes by carbon fibers with various structures. Fibre Chem 40:365–375CrossRefGoogle Scholar
  40. To Z, Lu S, Chang X, Li Z, Hu Z, Zhang L, Tian H (2011) Selective solid-phase extraction and separation of trace gold, palladium and platinum using activated carbon modified with ethyl-3-(2-aminoethylamino)-2-chlorobut-2-enoate. Microchim Acta 173:231–239CrossRefGoogle Scholar
  41. Uheida A, Iglesias M, Fontás C, Hidalo M, Salvadó V, Zhang Y, Muhammed M (2006) Sorption of palladium(II), rhodium(III) and platinum(IV) on Fe3O4 nanoparticles. J Colloid Interface Sci 301:402–408CrossRefGoogle Scholar
  42. Vassileva P, Tzvetkova P, Lakov L, Peshev O (2008) Thiourcil modified activated carbon as a sorbent for some precious and heavy metal ions. J Porous Mater 15:593–599CrossRefGoogle Scholar
  43. Yin CY, Arona MK, Daud WMA (2007) Review of modifications of activated carbon for enhancing contaminant uptakes from aqueous solutions. Sep Purif Technol 52:403–415Google Scholar
  44. Yuan CG, Zhang Y, Wang S, Chang A (2011) Separation and preconcentration of palladium using modified multi-walled carbon nanotubes without chelating agent. Microchim Acta 173:361–367CrossRefGoogle Scholar
  45. Zambrzycka E, Roszko D, Leśniewska B, Wilczewska AZ, Godlewska-Żylkiewicz B (2011) Studies of ion-imprinted polymers for solid-phase extraction of ruthenium from environmental samples before its determination by electrothermal atomic absorption spectrometry. Spectrochim Acta Part B 66:508–516Google Scholar
  46. Zambrzycka E, Kiedysz U, Wilczewska AZ, Leśniewska B, Godlewska-Żyłkiewicz B (2013) A novel ion imprinted polymer as a highly selective sorbent for separation of ruthenium ions from environmental samples. Anal Meth 5:3096–3105CrossRefGoogle Scholar
  47. Zhang BT, Zheng X, Li HF, Lin JM (2013) Application of carbon-based nano materials in sample preparation. Anal Chim Acta 784:1–17Google Scholar
  48. Zhou L, Xu J, Liang X, Liu Z (2010) Adsorption of platinum(IV) and palladium(II) from aqueous solution by magnetic cross-linking chitosan particles modified with ethylenediamine. J Hazard Mater 182:518–524CrossRefGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2015

Authors and Affiliations

  1. 1.Department of ChemistryUniversity of WarsawWarsawPoland

Personalised recommendations