Erratum to: Bevel Gear

The updated original online version for this book can be found at DOI 10.1007/978-3-662-43893-0 DOI 10.1007/978-3-662-43893-0_2 DOI 10.1007/978-3-662-43893-0_3 DOI 10.1007/978-3-662-43893-0_4

These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Frontmatter

Page VII, line 9 from the bottom

B was replaced by b

Page VII, line 11 from the bottom

b_M was changed B_M

Page XXVI

Garching was replaced by Eching-Dietersheim

Chapter 2

Page 19, Table 2.1 (last column)

“Radius difference” was replaced by “Cutter tilt” 4 times

Page 36, Table 2.7

σ was replaced by Σ in the whole table

Page 42, Table 2.12, equ. 2.79

D was replaced by C

Page 45, Table 2.16

“the face hobbed pinion” was replaced by “all pinions”

Chapter 3

Page 67, Figure caption 3.6

“γ” was moved to the next line

Chapter 4

Page 128, Table 4.16

Equation 4.115 was changed to:

Lengthwise curvature factor

${K}_{F0}=0,211\kern0.24em {\left(\frac{r_{c0}}{R_{m2}}\right)}^q+0,789$

For spiral bevel gears (face milled)

(4.115)

Page 128, Table 4.18, Equation 4.122

Y_ε was replaced by Y_LS

Page 184

Sentence “$\mathrm{where}:\kern0.5em {\xi_V}^{*}={\xi}_V/{m}_{mn}$ and ${\xi_R}^{*}={\xi}_R/{m}_{mn}$ (see Fig. 4.35)” was moved to right

Page 189

Layout of equation 4.349 was changed