Zusammenfassung
Als Sondergebiete der Weiterverarbeitung von Aluminium und seinen Legierungen werden im Folgenden einerseits die Bearbeitung von Profilen und Rohren zu räumlich geformten Bauteilen und andererseits solche Verfahren behandelt, die durch die speziellen Umformbedingungen besonders hohe Umformgrade ermöglichen. Hierzu gehören die Halbwarmumformung und die superplastische Umformung. Die unter der Bezeichnung „Severe Plastic Deformation – SPD“ in jüngster Zeit bekannt gewordenen Prozesse eröffnen zwar ein Potential an neuartigen Gefügedimensionen, s. Abschn. 3.1.3, sind aber für praktische Anwendungen noch nicht genügend entwickelt und daher nicht Gegenstand der folgenden Betrachtungen.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Literatur
Abe, Y., Yoshida, M.: Warm forming of 5182 aluminum alloy sheets into double square sinks. J. Jap. Inst. Light Metals 44, 240–245 (1994)
Baudin, S., Ray, P., Mac Donald, B.J., Hashmi, M.S.J.: Development of a novel method of tube bending using finite element simulation. J. Mater. Process. Technol. 153–154, 128–133 (2004)
Carrino, L., Giuliano, G.: Modelling of superplastic blow forming. Int. J. Mech. Sci. 39, 193–199 (1997)
Clausen, A.H., Hopperstad, O.S., Langseth, M.: Sensitivity of model parameters in stretch bending of aluminium extrusions. Int. J. Mech. Sci. 43, 427–453 (2001)
Clausen, A.H., Hopperstad, O.S., Langseth, M.: Stretch bending of aluminium extrusions for car bumpers. J. Mater. Process. Technol. 102, 241–248 (2000)
Dohmann, F., Hartl, Ch.: Möglichkeiten der Innenhochdruckumformung unter besonderer Beachtung des Formens von Strangpreßprofilen. In: Siegert, K. (Hrsg.) Neuere Entwicklungen in der Massivumformung. DGM Informationsgesellschaft-Verlag, Oberursel (1993)
Dohmann, F., Hartl, Ch.: Hydroforming-applications of coherent FE-simulations to the development of products and processes. J. Mater. Process. Technol. 150, 18–24 (2004)
Gantner, P., Bauer, H., Harrison, D.K., De Silva, A.K.M.: Free-Bending – a new bending technique in the hydroforming process chain. J. Mater. Process. Technol. 167, 302–308 (2005)
Hanicke, L., Lassl, G., Holm, S., Strandberg, Ö.: Lighter car body in aluminium with hydroforming technology – R & D results. Proceedings of International Body Engineering Conference (IBEC ‘96), Detroit, 1.–3. Okt. 1996
Hartl, Ch.: Research and advances in fundamentals and industrial applications of hydroforming. J. Mater. Process. Technol. 167, 383–392 (2005)
Heller, C., Schmoeckel, D.: Umformen von Aluminiumblechen bei erhöhten Temperaturen. Aluminium 64, 398–405 (1988)
Hirose, Y., Miyagi, Y., Hino, M., Eto, T.: Superplastisches Werkstoffverhalten der hochfesten Aluminiumlegierungen 7475. Aluminium 63, 386–390 (1987)
Hufnagel, W., et al.: Aluminium-Taschenbuch. Kap.: Chemisches Verhalten von Aluminium, 14. Aufl. Aluminium-Verlag, Düsseldorf (1988)
Kaibyshev, O.A., Pshenichnyuk, A.I.: Elongation to failure in the model of cooperative grain boundary sliding. Mater. Sci. Eng. A. 410–411, 105–108 (2005)
Lee, J.W., Kwon, H.C., Rhee, M.H., Im, Y.T.: Determination of forming limit of a structural aluminum tube in rubber pad bending. J. Mater. Process. Technol. 140, 487–493 (2003)
Mishra, R.S., Bieler, T.R., Mukherjee, A.K.: Mechanism of high strain rate superplasticity in aluminium alloy composites. Acta Mater. 45, 561–568 (1997)
Mukherjee, A.K.: Deformation mechanisms in superplasticity. Ann. Rev. Mater. Sci. 9, 191–217 (1979)
Neugebauer, R., Drossel, W.G., Lorenz, U., Luetz, N.: HexaBend – a new concept for 3D-free-form bending of tubes and profiles to preform hydroforming parts and endform space-frame-components. Adv. Technol. Plast. 2, 1465–1470 (2002)
Schmidt, J.J.: Superplastisch geformtes Aluminiumbauteil für den Airbus. Aluminium 70, 57–61 (1994)
Schmoeckel, D., Liebler, B.C., Speck, F.-D.: Deep drawing of aluminium in partially heated tools. Prod. Eng. 12, 55–58 (1994)
Schnaas, J.: Gebogene Aluminium-Strangpreßprofile im Fahrzeugbau. Aluminium 71, 102–108 (1995)
Shin, D.H., Lee, C.S., Kim, W.-J.: Superplasticity of fine-grained 7475 Al alloy and a proposed new deformation mechanism. Acta Mater. 45, 5195–5202 (1997)
Soer, W.A., Chezan, A.R., De Hosson, J.Th.M.: Deformation and reconstruction mechanisms in coarse-grained superplastic Al–Mg alloys. Acta Mater. 54, 3827–3833 (2006)
Utsumi, N., Sakaki, S.: Countermeasures against undesirable phenomena in the draw-bending process for extruded square tubes. J. Mater. Process. Technol. 123, 264–269 (2002)
Vollertsen, F., Sprenger, A., Kraus, J., Arnet, H.: Extrusion, channel, and profile bending: a review. J. Mater. Process. Technol. 87, 1–27 (1999)
Woo, S.S., Kim, Y.R., Shin, D.H., Kim, W.J.: Effects of Mg concentration on the quasi-superplasticity of coarse-grained Al-Mg alloys. Scr. Mater. 37, 1351–1358 (1997)
Yoshida, H., Tanaka, H., Takiguchi, K.: EP 0845939, A2, 1998/06/10 (1998)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Ostermann, F. (2014). Sondergebiete der Umformtechnik. In: Anwendungstechnologie Aluminium. VDI-Buch. Springer Vieweg, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-43807-7_13
Download citation
DOI: https://doi.org/10.1007/978-3-662-43807-7_13
Published:
Publisher Name: Springer Vieweg, Berlin, Heidelberg
Print ISBN: 978-3-662-43806-0
Online ISBN: 978-3-662-43807-7
eBook Packages: Computer Science and Engineering (German Language)