Abstract
The experiment was conducted using a neody-mium glass laser modified for normal pulse operation. The energy density was varied from 850J/sq cm where no breakdown occurred to 5000J/sq cm where the threshold for breakdown was exceeded. The normal pulse duration was 600μS. Analysis of the ejected material was achieved by using a Hughes ionisation gauge placed in the path of the ejected material. Oscilloscope traces of the ionisation gauge output show that the gauge’ sees’ what is flying past it. There is good correlation between laser radiation, plasma radiation and ionisation gauge fluctuations. The ionisation gauge gave distinguishable signals for ions, electrons, and neutral particles ejected from the target surface.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Johnson, C. B. (Naval Postgraduate School Monterey, USA). Rept. No. AD-A08160117; Master Thesis, 77pp., September 1979.
Uetz, H., Hardock, G. and Warnecke, H.-J. (Fraunhofer-Institute for Manufacturing Engineering and Automation (IPA), West Germany). In, Proc. 2nd Int. Conf. on Lasers in Manufacturing, 26–28 March 1985, Birmingham, UK, (Ed. M. F. Kimmitt), pp. 261–278. IFS (Publications) Ltd, Bedford, UK, 1985.
Hartley, J. FMS Mag., 3(4): 207–210, 1985.
Dullin, E. (CN Industries SA, France). In, Proc. 3rd Int. Conf. on Lasers in Manufacturing, 3–5 June 1986, Paris, France, (Ed. A. Quenzer), pp. 365–382. IFS (Publications) Ltd, Bedford, UK, 1986.
Hugenschmidt, M. (Institut Franco-Allemand de Recherches, France) Rept. No. ISL-CO-236183, 47 pp. October 1983. (In German)
Dowden, J., Davis, M. and Kapadia, P. (University of Essex, UK). J. Fluid Mech., 126(1): 123–146, 1983.
Aden, R. J. et al. Weld. J., 62(3): 72s–77s, 1983.
Dyatel, V. P. and Kovalenko, V. S. Elektronnaya Obrab. Mater., (3): 15–18, 1984. (In Russian)
Marchetti, R. B., Penco, E. (Selenia SpA, Italy) and Salvetti, G. (ENEA-CRE Casaccia, Italy). In, ICALEO ′83, Proc. Materials Processing Symp., Vol. 38, 14–17 November 1983, Los Angeles, CA, (Ed. E. A. Metzbower), pp. 10–15. Laser Institute of America, Toledo, OH, USA, 1984.
Nunes, A. C. (National Aeronautics and Space Administration, USA). Rept. No. NAS 1. 15: 86503, 22pp., August 1985. National Aeronautics and Space Administration, Huntsville, AL, USA.
Gladkov, E. A. et al. (NE Bauman Higher Technical School, USSR). Weld. Prod., 32(3): 51–53, 1985.
Whitlock, R. R. (US Naval Research Laboratory, USA). In, Laser Welding, Machining and Materials Processing — Proc. Int. Conf. on Applications of Laser and Electro-Optics, ICALEO ′85, 11–14 November 1985, San Francisco, CA, (Ed. C. Albright), pp. 187–199. Laser Institute of America, Toledo, OH, USA/IFS (Publications) Ltd, Bedford, UK, 1986.
Aberkane, Y. and Dumas, M. (Centre d’Etudes Nucléaires de Saclay (CEN/CEA), France). In, Proc. 3rd Int. Conf. on Lasers in Manufacturing, 3–5 June 1986, Paris, France, (Ed. A. Quenzer), pp. 77–88. IFS (Publications) Ltd, Bedford, UK, 1986.
Koechner, W. (Hadron Inc, USA). In, Proc. SPIE Optical Design Problems in Laser Systems, Vol. 69, 21–22 August 1975, San Diego, CA, (Ed. W. R. Sooy), pp. 148–157. Society of Photo-Optical Instrumentation Engineers, Palos Verdes Estates, CA, USA, 1975.
Trenholme, J. B. (Lawrence Livermore Laboratory, USA). In, Proc. SPIE Optical Design Problems in Laser Systems, 21–22 August 1975, San Diego, CA, (Ed. W. R. Sooy), pp. 158–162. Society of Photo-Optical Instrumentation Engineers, Palos Verdes Estates, CA, USA, 1975.
Rioux, M., Tremblay, R. and Belanger, P. A. (Université Laval, Canada). Appl. Optics, 17(10): 1532–1536, May 1978.
Seaman, F. D. SME Tech. Paper No. MR78–345, 11pp. 1978. Society of Manufacturing Engineers, Dearborn, MI, USA.
Sharp, C. M. (BOC Industrial Power Beams, UK). In, Proc. SPIE 4th European Electro-Optics Conf., Vol. 164, 10–13 October 1978, Utrecht, Netherlands, pp. 271–278. Society of Photo-optical Instrumentation Engineers, Bellingham, WA, USA, 1979.
Shovkoplyas, V. M. et al. (E. O. Paton Welding Institute, USSR). Autom. Weld., 33(11): 15–16, 1980.
Pope, L. E. and McDonald, T. G. (Sandia National Laboratories, USA). Rept. No. SAND-81-0011C, CONF-8110110-2, 12pp. October 1981.
Averin, A. P. et al. (P. N. Lebedev Physics Institute, USSR). Sov. Phys. Dokl, 27(10): 4–6, 1982.
Lim, G. C. and Steer, W. M. (Imperial College, UK). In, Proc. 1st Int. Conf. on Lasers in Manufacturing, 1–3 November 1983, Brighton, UK, (Ed. M. F. Kimmitt), pp. 161–168. IFS (Publications) Ltd, Bedford, UK, 1983.
Skripchenko, A. I. and Surkov, A. V. (Izhorskii Plant Production Association, USSR). Avtom Svarka, 359(2): 45–48, 1983. (In Russian)
Luxon, J. T. (GMI Engineering & Management Institute, USA). In, ICALEO ′83, Proc., Materials Processing Symp., Vol. 38, 14–17 November 1983, Los Angeles, CA, (Ed. E. A. Metzbower), pp. 31–36. Laser Institute of America, Toledo, OH, USA, 1984.
Ripper, G. and Herzinger, G. (Technical High School, Darmstadt, Germany). Feinwerktech. & Messtech, 92(6): 297–302, 1984. (In German)
Takahashi, K et al. (Sumitomo Electric Industries Ltd, Japan). Sumitomo Electr. Tech. Review, 23(1): 203–210, 1984.
Nanba, H. et al. (Sumitomo Electric Industries, Japan) and Miyata, T. (Matsuschita Research Institute, Japan). In, ICALEO ′84, Proc. Materials Processing Symp., Vol. 44, 12–15 November 1984, Boston, MA, (Ed. J. Mazumder), pp. 284–290. Laser Institute of America, Toledo, OH, USA, 1985.
Loosen, P., Beyer, E. and Kramer, R. (Fraunhofer-Institut für Lasertech, Germany). Laser and Optoelektron, 17(3): 278–281, 1985. (In German)
Macfadyen, N. (Barr & Stroud Ltd, UK). In, Proc. 2nd Int. Conf. on Lasers in Manufacturing, 26–28 March 1985, Birmingham, UK, (Ed. M. F. Kim-mitt), pp. 173–182. IFS (Publications) Ltd, Bedford, UK, 1985.
Forbes, N. (Ferranti Industrial Electronics Ltd, UK). In, Proc. 2nd Int. Conf. on Lasers in Manufacturing, 26–28 March 1985, Birmingham, UK, (Ed. M. F. Kimmitt), pp. 309–318. IFS (Publications) Ltd, Bedford, UK, 1985.
Sano, R. et al. (Matsuschita Research Industries, Japan). In, ICALEO ′84, Proc. Materials Processing Symp., Vol. 44, 12–15 November 1984, Boston, MA, (Ed. J. Mazumder), pp. 246–252. Laser Institute of America, Toledo, OH, USA, 1985.
Schellhorn, M., Nowack, R. and Roth, G. (DFVLR, Institut für Technische Physik, West Germany). In, Proc. 3rd Int. Conf. on Lasers in Manufacturing, 3–5 June 1986, Paris, France, (Ed. A. Quenzer), pp.97–106). ITS (Publications) Ltd, Bedford, UK, 1986.
Klemens, P. G. (University of Connecticut, USA). J.Appl. Physics, 47(5): 2165–2174, 1976.
Andrews, J. G., Atthey, D. R. and Jerrard, H. G. (Marchwood Engineering Laboratories, CEGB, UK). In, Proc. Electro-Optics Laser Int. Conf., 9–11 March 1976, Brighton, UK, pp. 160–166. IPC Science and Technology Press, Guildford, UK). Also, J. Appl. Physics D., 9 (15): 2181-2194, 1976.
Yoshioka, S., Miyazaki, T. and Miyabe, H. (Chiba Institute of Technology, Japan). Jpn. Weld. Soc., 8(1): 38–41, 1977.
McGuire, B. C. (Rockwell International, USA). In, Proc. 3rd Biennial Infrared Inf. Exch., 24–26 August 1976, St. Louis, MO, pp. 15–21. AGA Corp, Secaucus, NJ, USA, 1977.
Rykalin, N. and Uglov, A. (A. A. Baikov Institute of Metallurgy, USSR). In, Proc. Int. Centre for Heat and Mass Transfer — Heat and Mass Transfer in Metall. Systems Seminar, 3–7 September 1979, Dubrovnik, Yugoslavia, 14pp. Hemisphere Publ. Corp, Washington DC, USA.SA.
Koledov, L. A. et al. Svar, Proizvod., (5): 4–5 1980. (In Russian)
Robert, H. Rev. Soudure, 37(4): 199–210, 1981 and 38(1): 19-25, 1982. (In French)
Jones, W. H. (Monsanto Res. Corp., USA). Rept. No. MLM-2802, 8pp., February 1981. Monsanto Research Corp. Miamisburg, OH, USA.
Kashiwagi, T. Fire Safety J., 3(3): 185–200, 1981.
Eagar, T. W. et al. (Massachusetts Institute of Technology, USA). Rept. No. AD-A118776114, 134pp. April 1982. (See also rept. No. AD-A107 717).
Jones, W. H. (Monsanto Research Corp, USA). Rept. No. MLM-3105 (OP), CONF 8 309158-1, 6pp, September 1983. Monsanto Research Corp, Miamisburg, OH, USA
Grigor’yants, A. G. et al. (Moscow Higher Technical School, USSR). Avtom. Svarka, 369(12): 38–40, 1983. (In Russian)
Rykalin, N. N. and Uglov, A. A. (Institute of Metallurgy, USSR). Heat Transfer — Sov. Res., 15(3): 20–36, 1983.
Blom, G. M. J. Applied Physics, 54(11): 6175–6182, 1983.
Lepore, M. et al. Optic and Lasers Engineering, 4(4): 241–251, 1983.
Volobuev, Yu. V. (N. E. Bauman Higher Technical School, USSR). Weld. Prod., 30(9): 34–35, 1983.
Schmitt, A. J. (Naval Research Laboratory, USA). Final rept. No. NRL-MR-5221, 11pp., February 1984. Naval Research Laboratory, Washington, DC. USA).
Jones, M. G. and Georgalas, G. (GEC, USA). In, ICALEO ′83, Proc, Materials Processing Symp., Vol. 38, 14–17 November 1983, Los Angeles, CA, (Ed. E. A. Metzbower), pp. 199–207. Laser Institute of America, Toledo, OH, USA, 1984.
Ikeda, M., Yamada, A. and Shinohara, K. (Electrotechnical Laboratory, Japan). In, ICALEO-S3, Proc. Materials Processing Symp., Vol. 38, 14–17 November 1983, Los Angeles, CA, (Ed. E. A. Metzbower), pp. 16–21. Laser Institute of America, Toledo, OH, USA, 1984.
Chande, T. and Mazumder, J. (University of Illinois, USA). J. Applied Phys., 56(7): 1981–1986, October 1984.
DebRoy, T. (Pennsylvania State University USA). Progress Rept. No. DOE/ER/45030-1 25pp, March 1984.
Russo, A. J. (Sandia National Laboratories, USA). Rept. No. SAND-85-0225C, CONF-851125-1, 23pp., April 1985.
Kostrubiec, F. (Lodz Technical University, Poland). Zesz. Nauk. Politech. Lodz. Elektr., (77): 63–74, 1985. (In Polish)
Donati, V. (CISE SpA, Segrate, Italy). In, Proc. 5th Int. Symp. on Gas Flow and Chemical Lasers, 20–24 August 1984, Oxford, UK, (Eds. A. S. Kaya and A. C. Walker). Adam Hilger, Bristol, UK, 1985, 534pp.
DebRoy, T. (Pennsylvania State University, USA). Rept. No. DOE/ER/45158-2, 44pp., October 1985.
Bober, M. and Singer, J. (Kernforschungszentrum Karlsruhe, Institut für Neutronenphy. und Reaktortech, Germany). High Temp Sci. (4th Int. Conf. on High Temperature and Energy Related Materials, 1–6 April 1984, Santa Fe, NM) 19(3): 329-345, 1985.
Miyamoto, I., Maruo, H. and Arata, Y. (Osaka University, Japan). In, ICALEO ′84, Proc. Materials Processing Symp., Vol. 44, 12–15 November 1984, Boston, MA, USA, (Ed. J. Mazumder), pp. 313–320. Laser Institute of America, Toledo, OH, USA, 1985.
Dowden, J. (Essex University, UK). J. Physics, D, 18(10): 1987–1994, 1985.
Oh, J. E., Ianno, N. J. and Ahmed, A. U. (Nebraska University, USA). Appl. Phys. Commun, 5(3): 113–138, 1985.
La Roca, A. V. (Fiat Auto, Italy). In, ICALEO ′84, Proc. Materials Processing Symp., Vol. 44, 12–15 November 1984, Boston MA, (Ed. J. Mazumder), pp. 198–225. Laser Institute of America, Toledo, OH, USA, 1985.
Sasnett, M. W. (Coherent General Inc. USA). In, Proc. 3rd. Int. Conf. on Lasers in Manufacturing, 3–5 June 1986, Paris, France, (Ed. A. Quenzer), pp. 279–292. IFS (Publications) Ltd, Bedford, UK, 1986.
Matsunawa, A. and Katayama, S. (Welding Research Institute of Osaka University, Japan). In, Laser Welding, Machining and Materials Processing-Proc. Int. Conf. on Application of Lasers and Electro-Optics, ICALEO ′85, 11–14 November 1985, San Francisco, CA, (Ed. C. Albright), pp. 41–48. Laser Institute of America, Toledo, OH, USA/IFS (Publications) Ltd, Bedford, UK, 1986.
Dietz, J. and Merlin, J. (Institut National des Sciences Appliquées (INSA), France). In, Proc. 3rd Int. Conf on Lasers in Manufacturing, 3–5 June 1986, Paris, France, (Ed. A. Quenzer), pp. 359–364. IFS (Publications) Ltd, Bedford, UK, 1986.
Jeanloz, R. and Heinz, D. L. (University of California, USA). In, Laser Welding, Machining and Materials Processing — Proc. Int. Conf. on Applications of Lasers and Electro-Optics, ICALEO ′85, 11–14 November 1985, Laser Institute of America, Toledo, OH, USA, San Francisco, CA, pp. 239–243. IFS (Publications) Ltd, Bedford, UK, 1986.
Casey, H. (Los Alamos Sci. Lab, NM, USA). In, IEE Conf. Pubi, 189, part 2, Proc. 6th Int. Conf. on Gas Discharges and Their Applications, 8-11 September 1980, Edinburgh, UK, pp. 86-89. IEE, London, UK, 1980. (Summary of Los Alamos Sci. Lab. Rept. No. LA-UR-80-10688 CONF 800922-2).
Albright, C. E. In, Proc. Trends in Welding Research in the United States Conf., 16–18 November 1981, New Orleans, LA, pp. 653–665. American Society for Metals, OH, USA, 1982.
Minamida, K. et al. In, ICALEO ′82, Proc. Materials Processing Symp., Vol. 31, 20–23 September 1982, Boston, MA, pp. 65–72. Laser Institute of America, Toledo, OH, USA, 1982.
Arata, Y., Oda, T. and Nishio, R. (Osaka University, Japan). Jpn, Weld, Res. Inst., 12(2): 161–166, 1983.
Arata, Y., Abe, N. and Oda, T. (Welding Research Institute, Osaka University, Japan). In, ICALEO 83, Proc. Materials Processing Symp., Vol. 38, 14–17 November 1983, Los Angeles, CA, (Ed. E. A. Metzbower), pp. 59–66. Laser Institute of America, Toledo, OH, USA, 1984.
Bever, E. et al. (Tech. Hochschule, Darmstadt, Germany). In, Proc. SPIE Int. Soc. Optic. Engineers, Vol. 455, 26–27 September 1983, Linz, Austria, pp. 75-80. SPIE, Austrian Phys. Soc, 1984.
Duncan, H. A. J. Eng. Mater. Technol. 105(3): 224–229, 1983
Dixon, R. D. and Lewis, G. K. (Los Alamos National Laboratory, USA). In, ICALEO ′83, Proc. Materials Processing Symp., Vol. 38, 14–17 November 1983, Los Angeles, CA, (Ed. E. A. Metzbower), pp. 44–50. Laser Institute of America, Toledo, OH, USA, 1984.
Epstein, H. M. (Battelle’s Columbus Laboratories, USA). In, ICALEO ′83, Proc. Materials Processing Symp., Vol. 38, 14–17 November 1983, Los Angeles, CA, (Ed. E. A. Metzbower), pp. 1–9. Laser Institute of America, Toledo, OH, USA, 1984.
Arnot, R. S. and Albright, C. E. (Ohio State University, USA). In, ICALEO ′83, Proc. Materials Processing, Symp., 14–17 November 1983, Los Angeles, CA, (Ed. E. A. Metzbower), pp. 51–58. Laser Institute of America, Toledo, OH, USA, 1984.
Estill, W. B. and Formisaro, B. D. (Sandia National Laboratories, USA). In, ICALEO ′83, Proc. Materials Processing Symp., Vol. 38, 14–17 November 1983, Los Angeles, CA, (Ed. E. A. Metzbower), pp. 67–72. Laser Institute of America, Toledo, OH, USA, 1984.
Dell’Erba, M. et al. (Centro Laser, Italy). Appl. Phys. Commum, 4(1): 49–61, 1984.
Matsunawa, A. et al. (Welding Research Institute, Osaka University Japan). In, ICALEO–84, Proc. Materials Processing Symp., Vol. 44, 12–15 November 1984, Boston, MA, (Ed. J. Mazumder), pp. 35–42. Laser Institute of America, Toledo, OH, USA, 1985.
Blake, A. and Mazumder, J, (University of Illinois, USA). J. Engineering Ind., 107(3): 275–280, 1985. This is an update of a paper in, ICALEO ′82, Materials Processing Symp., Vol. 31, 20–23 September 1982, pp. 33-50. Laser Institute of America, Toledo, OH, USA, 1982.
Gladkov, E. A. et al. Svar. Proizvod., (3): 40–42, 1985. (In Russian).
Dixon, R. D. and Lewis, G. K. (Los Alamos National Laboratory, USA). In, ICALEO ′84, Proc. Materials Processing Symp., Vol. 44, 12–15 November 1984, Boston, MA, (Ed. J. Mazumder), pp. 28–34. Laser Institute of America, Toledo, OH, USA, 1985. (See also rept. No. LA-UR-84-3808 CONF-8411100-4, 8pp. 1984).
Arata, Y., Abe, N. and Oda, T. (Osaka University, Japan). In, Gas Flow and Chemical Lasers, Proc. 5th Int. Symp., 20–24 August 1984, Oxford, UK, (Eds. A. S. Kaye and A. C. Walker), pp. 61–66. Adam Hilger, Bristol, UK, 1985.
Peebles, H. C. et al. (Sandia National Laboratories, USA). Rept. No. SAND-84-2667C CONF-8504128-2-Abst., 2pp., 1985.
Dixon, R. D. and Lewis, G. K. (Los Alamos National Laboratory, USA). Rept. No. LA-UR-85-994 CONF-850979-1, 4pp, 1985.
Akau, R. L. et al. (Sandia National Laboratories, USA). Rept. No. SAND-85-1523C CONF-8510170-1, 18pp, October 1985.
Lewis, G. K. and Dixon, R. D. (Los Alamos National Laboratory, USA). Rept. No. LA-UR-85-1141 CONF-850975-1, 11 pp., 1985.
Miyamoto, I., Maruo, H. and Arata, Y. (Osaka University, Japan). In, ICALEO ′84, Proc. Materials Processing Symp., Vol. 44, 12–15 November 1985, Boston, MA. (Ed. J. Mazumder), pp. 68–75. Laser Institute of America, Toledo, OH, USA, 1985.
Sidorowicz, K. (Bendix Corp, USA). In, Proc. Conf. on Applications of Lasers in Material Processing, 18–20 April 1979, Washington, DC, pp. 65-81. ASM (Mater. Metalwork Technol. Ser.) 1979. Also, Bendix. Corp. Rept. No. BDX-613-2118 CONF-78 04104-1, 21pp, 1979; and also in Welding J., 58(11): 3245-3295, 1979.
Mazumder, J. and Steen, W. M. J. Appl. Phys., 51(2): 941–947, 1980.
Jakovlev, E. B. et al. J. Phys. D (Appl. Phys.), 13(8): 1565–1570, 1980.
Grigor’yants, A. G. et al. Izv. V. U. Z. Mashinos-troenie, (11): 135–138, 1981. (In Russian)
Esposito, C. and Daurelio, G. (Centro Laser, Italy). Optic Lasers Engineering, 2(3): 161–171, 1981.
Emery, M. H., et al. Rept. No. AD-A122 421/1 (NRL-MR-4947), 18pp., December 1982. Naval Research Laboratory, Washington, DC, USA).
Steen, W. M. and Mazumder, J. (Imperial College, UK). Final Rept. No. AD-A141 096/8, 92pp., November 1983.
Fedorov, B. M. et al. Avtom. Svarka., (1): 48–50, 1983. (In Russian)
Gay, P. and Manassero, G. (Fiat Research Centre, Italy). In, ICALEO ′83 Proc. Materials Processing Symp., Vol. 38, 14–17 November 1983, Los Angeles, CA, (Ed. E. A. Metzbower), pp. 224–228. Laser Institute of America, Toledo, OH, USA, 1984.
Tosch, R., Gruber, H. and Fritzsche, K. (Tech. Hochschule Leipzig, Germany). Feingeraetetch-nik, 33(3): 119–120, 1984. (In German)
Covle, R. J. and Rajaram, S. (Western Electric, Priceton, NY). In, ICALEO ′83, Proc. Materials Processing Symp., Vol. 38, 14–17 November 1983, Los Angeles, CA, (Ed. E. A. Metzbower), pp. 216–223. Laser Institute of America, Toledo, OH, USA, 1984.
Blottner, F. G. (Sandia National Laboratories, USA). In, Modeling of Casting and Welding Process 11, 31 July–5 August 1983, Henniker, NH, USA, pp. 349–361. Metallurgical Society/AIME, Warrendale, PA, USA, 1984.
Mehta, P., Cooper, E. B. and Miller, R. (GEC, USA). In, ICALEO ′84, Proc. Materials Processing Symp., Vol. 44, 12–15 November 1984, Boston, MA, (Ed. J. Mazumder), pp. 43–52. Laser Institute of America, Toledo, OH, USA, 1985.
Davis, M. and Kapadia, P. (Essex University, UK). J. Comput. Phys., 60(3): 534–548, 1985m.
Ohmura, E. (Osaka University, Japan). Heat Transfer-Jpn. Res., 14(3): 32–46, 1985.
Schuocker, D. et al. (Technical University Wien, Austria). In, Proc. 5th Int. Symp. on Gas Flow and Chemical Lasers, 20–24 August 1984, Oxford, UK, (Eds. A. S. Kaye and A. C. Walker), pp. 111–116. Adam Hilger, Bristol, UK, 1985.
Chan, C., Mazumder, J. and Chen, M. M. (University of Illinois, USA). In, ICALEO ′84, Proc. Materials Processing Symp., Vol. 44, 12–15 November 1984, Boston MA, (Ed. J. Mazumder), pp. 17–27. Laser Institute of America, Toledo, OH, USA, 1985.
Chande, T. and Mazumder, J. (University of Illinois, USA). In, ICALEO ′84, Proc. Materials Processing Symp., Vol. 44, 12–15 November 1984, Boston, MA, (Ed. J. Mazumder), pp. 140–151. Laser Institute of America, Toledo, OH, USA, 1985.
Russo, A. J., et al. (Sandia National Laboratories, USA). In, ICALEO’ 84, Proc. Materials Processing Symp., Vol. 44, 12–15 November 1984, Boston, MA, (Ed. J. Mazumder), pp. 8–16. Laser Institute of America, Toledo OH, USA, 1985.
Chang, D. U. (Control Laser Corp, USA). In, Laser Welding, Machining and Materials Processing — Proc. Int. Conf. on Applications of Lasers and Electro-Optics, ICALEO’ 85, 11–14 November 1985, San Francisco, CA, (Ed. C. Albright), pp. 27–38. Laser Institute of America, Toledo, OH, USA/IFS (Publications) Ltd, Bedford, UK, 1986.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1986 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Gomersall, A. (1986). Laser Beam Physics. In: Lasers in Materials Processing. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-30194-4_3
Download citation
DOI: https://doi.org/10.1007/978-3-662-30194-4_3
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-30196-8
Online ISBN: 978-3-662-30194-4
eBook Packages: Springer Book Archive