Abstract
The glass mass which is to be shaped in a viscous condition has to be cooled by the forming elements — mold, plunger, finish, bottom-plate and other — to the point where shape is preserved when it leaves the machine. The large amount of heat that must be removed during the molding process is dissipated in various ways:
-
1.
Natural air cooling. Limited heat loss of the metal mold permits only moderate production rates. This method ist used in hand shops, especially for blowing of hollow glass.
-
2.
Artificial cooling by periodic dipping in water. Wood or graphite molds are used “cold”: a water vapor film between mold and glass serves as a separating and gliding layer.
-
3.
Forced air cooling by jets (one or more) impinging on the mold wall vertically or at an angle. This is the most widespread method in hollow glass manufacture since it is relatively simple.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Giegebich, W.: Wärmetechnische Probleme der Gestaltung von Glasformen. Glastechn. Ber. 23 (1950) 161–169.
Trier, W.: Zähigkeitsverteilung und Fließen des Glases in Vorformen. Glastechn. Ber. 32K (1959) II/17-II/25.
Schreck, C.: Beitrag zur Ermittlung des Wärmeflusses in den Wänden von Glasformen. Glastechn. Ber. 28 (1955) 351–359.
Wille, R.: Methoden der Formenkühlung an Glasverarbeitungsmaschinen. Glastechn. Ber. 28 (1955) 351–359.
Wille, R.: Luftkühlung von Glasformen. Glastechn. Ber. 32 K (1959) 11/26 to II/32.
Bhattacharya, A.: Der Einfluß von Nadeln auf die Kühlung von kurzen Kreiszylindern bei Freistrahlanblasung. Glastechn. Ber. 32 (1959) 397–401.
Trier, W.: Temperaturmessungen in Glasformen. Glastechn. Ber. 28 (1955) 336–359.
Severin, H.: Erfahrungen und Vorschläge zur Kühlung der Vorformen an Flaschenblasmaschinen (Abstract). Glastechn. Ber. 13 (1935) 257.
Krugow, G. I.: Kühlen der Formen von WSch-Halbautomaten mit Wasser und Luft (from the Russian). Stekoln. Prom. 16 (1940) 3/4.
Stefan, Z.: Das Kühlen der Formen bei halbautomatischer Erzeugung auf Saugblasmaschinen. Ceskol Sklar. Keram. 4 (1954) 179.
Wendler, A.: Maschinelle Glasverarbeitung, Leipzig: Akad. Verlagsges. 1929.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1969 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Giegerich, W., Wille, R. (1969). Mold Cooling. In: Giegerich, W., Trier, W. (eds) Glass Machines. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-28676-0_10
Download citation
DOI: https://doi.org/10.1007/978-3-662-28676-0_10
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-27193-3
Online ISBN: 978-3-662-28676-0
eBook Packages: Springer Book Archive