Zusammenfassung
In eine metallische Matrix kleine Teilchen einer anderen Phase einzubetten, ist eine wirkungsvolle Methode zur Erhöhung der Festigkeit und Härte von Metallen. Die Teilchen können in ihrer endgültigen Form durch pulvermetallurgische Prozesse der metallischen Matrix zugesetzt werden (vgl. Kap. D 2) oder durch Phasenumwandlung aus einer festen Lösung entstehen. Hierzu werden zwei wesentliche Phasenumwandlungen benutzt: eutektische Umwandlung und Ausscheidung aus übersättigter fester Lösung. Das letztere wird hier besprochen.
Die Abschnitte 1.1–1.17 wurden von D. W. Wakeman, 1.21–1.212.1 von R. A. Smite, 1.212.2 von A. W. Franklin und 1.22–1.23 von D. W. Wakeman verfaßt.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur zu Kapitel D
Vollmer, M., A. Weber: Z. phys. Chem. 119 (1925) 277.
Becker, R., W. DÖRing: Ann. Phys. 24 (1935) 719.
Cahn, J. W.: Acta metallurg. 5 (1957) 169.
Mihalisin, J. R., R. F. Decker: Trans. metallurg. Soc Aime 218 (1960) 507.
Kelly, A., R. B. NiCHoLsnN: Progr. in Mater. Sci. 10 (1963) 243.
Fell, E. A., W. I. Mitchell, D. W. Wakeman: In: Iron Steel Inst., spec. Rep. Nr. 70. London 1961, S. 136.
Fleetwood, M. J.: J. Inst. Metals 90 (1962) 429.
Nabarro, F. R. N.: Proc. phys. Soc. 52 (1940) 90.
Nabarro, F. R. N.: Proc. roy. Soc. London, Ser. A, 175 (1940) 519.
Dehlinger, U., H. Knapp: Z. Metallkde. 43 (1952) 223.
KnNoreevski, S. T.: J. Inst. Metals 69 (1943) 397.
Zener, C.: J. appl. Phys. 20 (1949) 950.
West, C., C. Zener: J. appl. Phys. 21 (1950) 5.
Cahn, J. W., J. E. Hilliard: J them. Phys. 28 (1958) 258
Cahn, J. W., J. E. Hilliard: J them. Phys. 31 (1959) S. 688.
Hillert, M., M. Cohen, B. L. Averbach: Acta metallurg. 9 (1961) 536.
Geisler, A. H., J. B. Newkirk: Trans. Aime 180 (1944) 101.
Ortani, R. A.: Acta metallurg. 12 (1964) 1399.
Manenc, J.: Rev. Métallurg. 54 (1957) 161.
Manenc, J.: Acta metallurg. 7 (1959) 124.
Buckle, C., B. Genty, J. Manenc: Rev. Métallurg. 56 (1959) 247.
Sharp, W. H.: High Temperature Materials. Bd. 18, Teil 2, New York 1963, S. 189.
Bieber, C. G., R. F. Decker: Trans. metallurg. Soc Aime 221 (1961) 629.
Hansen, M.: Constitution of Binary Alloys. New York 1958, S. 542.
Phillips, H. W. L.: Annotated Equilibrium Diagram No. 4. Hrsg. v. The Institute of Metals. London 1944.
Hansen, M.: Constitution of Binary Alloys. New York 1958, S. 1050.
Taylor, A.: Trans Aime 206 (1956) 1356–1362.
Schramm, J.: Z. Metallkde. 33 (1941) 403.
Betteridge, W., A. W. Franklin: Metal Treatm. Drop Forg. 23 (1956) 343–348.
Betteridge, W., A. W. Franklin: Development of Nickel-Chromium Base Alloys for High-temperature Service. Hrsg. v. Henry Wiggin and Co., Ltd. Birmingham 1957.
Taylor, A.: Trans. Aime 209 (1957) 72–75.
Haynes, F. G.: J. Inst. Metals 90 (1961/1962) 311.
Guard, R. W., J. H. Westbrook: Trans. metallurg. Soc. Aime 215 (1959) 807.
Pridantsev, M. V.: In: Symp. on Heat Resisting Metallic Materials 1964, Vortr. Nr. 19. Hrsg. v. Czech Sci. and Tech. Soc. Praha 1964.
Hume-Rothery, W., G. V. Raynor: The Structure of Metals and Alloys. Hrsg. v. Institute of Metals. London 1962.
Manenc, J.: Rev. Nickel 29 (1963) 96.
Bigelow, W. C. Mitarbeiter: In: Astm Spec. Tech. Publn. No. 245. Phil. adelphia/Pa. 1959, S. 73.
Decker, R. F., J. R. Mihalisin: Trans. metallurg. Soc Aime 218 (1960) 507.
Hagel, W. C., H. J. Beattiejr: Trans. metallurg. Soc Aime 215 (1959) 967.
Wilde, R. F., N. J. Grant: Trans Aime 209 (1957) 865.
Betteridge, W., R. A. Smith: In: Astm Spec. Tech. Pubin. No. 174. Philadelphia/Pa. 1956.
Pridantsev, M. V., E. I. Belikova, E. G. Nazarov: Spetsialnye Stali 27 (1962) 93.
Freche, J. C., W. J. Waters: Foundry 92 (1964) 44–47.
Freche, J. C., W. J. Waters: Mater. in Design Engng 57 (1963) 85 bis 87.
Schwaab, P., K. Hagen: Z. Metallkde. 54 (1963) 23.
Detert, K., H. PonL: Z. Metallkde. 55 (1964) 36–46.
Nimonic Alloys. Physical and Mechanical Properties. Hrsg. v. Henry Wiggin and Co., Ltd. Hereford 1966.
Heslop, J.: Kobalt Nr. 24, Sept. 1964, S. 109–115.
Bieber, C. G.: US Pat. Nr. 2 570 194, Apr. 1946.
Decker, R. F., J. P. Rowe, J. W. Freeman: Trans. metallurg. Soc Aime 212 (1958) 686.
VoLK, K. E., A. W. Franklin: Z Metallkde. 51 (1960) 172–179.
Twigg, P. L., E. G. Richards: The Effect of Boron on the Creep Properties of a Precipitation-hardened Austenitic Nickel-Chromium Alloy. Vortrag Nr. 28, gehalten auf der Conference on Creep, C. E. A. Saclay, 22.-23. Juni 1967.
Crussard, C., J. Plateau, G. Henry: Joint Internat. Conf. on Creep, London 1963. Buch 1, Vortrag Nr. 64, S. 91. Hrsg. v. Instn. of Mech. Engn.
Franklin, A. W., J. Heslop, R. A. Smith: J. Inst. Metals 92 (1964) 313–322.
Krumpos, J., K. Cira: In: Symp. on Heat Resisting Metallic Materials 1964. Vortrag Nr. 17. Hrsg. v. Czech. Sci. and Tech. Soc. Praha 1964.
Pfeil, L. B., N. P. Allen, C. G. Conway: Iron Steel Inst. Spec. Rep. No. 43 London 1952, 37–45.
Brit. Pat. 583 845, 1947.
Betteridge, W., A. W. Franklin: Metal Treatm. Drop Forg. 23 (1956) 343–389.
Betteridge, W., A. W. Franklin: J. Inst. Metals 85 (1957) 473–479.
Weaver, C. W.: J. Inst. Metals 88 (1960) 462–467.
Fell, E. A.: Metallurgia 63 (1961) 157–166.
Fell, E. A., W. I. Mitchell, D. W. Wakeman: Iron Steel Inst. Spec. Rep. No. 70. London 1961, S. 136.
Fleetwood, M. J.: J. Inst. Metals 90 (1962) 429.
Hanson, D., M. A. Wheeler: J Inst. Metals 45 (1931) 229.
Betteridge, W., A. W. Franklin: J Inst. Metals 80 (1951) 147–150.
Heslop, J.: J. Inst. Metals 91 (1962) 28–33.
Weaver, C. W.: J. Inst. Metals 88 (1960) 296–300.
Decker, R. F., J. P. Rowe, J. W. Freeman: N. A. C. A. Rep. 1392. Washington/D.C. 1958.
Kaufman, M.: Trans. metallurg. Soc. Aime 227 (1963) 405–422.
Imai, Y., T. Masumoto: J. Iron Steel Inst. 200 (1962) 877.
Rowe, J. P., J. W. Freeman: Joint International Conference on Creep, London 1963. Hrsg. v. Instn. Mech. Eng. Buch 1, Vortrag Nr. 46, S. 65–72.
Dlls, R. R., C. P. Sullivan: J. Inst. Metals 92 (1964) 186–187.
Bieber, C. G., R. F. Decker: J. Metals 13 (1961) 231–233.
Allen, N. P., P. G. Forrest: International Conference on Fatigue of Metals. Institution of Mechanical Engineers, London 1956.
Franklin, A. W., E. D. Ward: Rev. Métallurg. 55 (1958) 927.
Coffin, L. F.: Symposium on Internal Stresses and Fatigue in Metals, 1958. Hrsg. v. General Motors (Usa). New York, Amsterdam 1959, S. 363.
Glenny, E., T. A. Taylor: J. Inst. Metals 88 (1959–60) 449.
Forrest, P. G., K. B. Armstrong: J. Inst. Metals 94 (1966) 204–213.
Betteridge, W.: The Nimonie Alloys. London 1959, S. 194.
Franklin, A. W., J. Thexton, D. R. Wood: Joint International Conference on Creep London 1963. Hrsg. v. Instn. Mech. Eng.
Towers, J. A.: Brit. Weld. J. 11 (1964) 276–278.
Kaufman, M., A. E. Palty: Trans. metallurg. Soc Aime 221 (1961) 1253.
Darmara, F. N.: A. S. M. E. Reprint 55-A-198. Amer. Soc. Mech. Eng. 1955.
WooD, D. R., R. M. Cook: Metallurgia 67 (1963) 109–117.
Iodkovskii, S. A., V. P. Kudelkin, A. S. Loboda: Issled Stalei i Sphavov, Akademii Nauk Sssr, Inst. Met. Baikova 1964, S. 209–215.
Hansen, M.: Constitution of Binary Alloys. New York 1958, S. 601.
Raynor, G. V.: Annotated Equilibrium Diagram No. 4. Hrsg. v. The Institute of Metals. London 1944.
Alexander, W. O.: J. Inst. Metals 61 (1937) 83
Alexander, W. O.: J. Inst. Metals 63 (1938) 163
Alexander, W. O.: J. Inst. Metals 65 (1939) 217.
Bradley, A. J., II. LrPson: Proc. roy. Soc. London Ser. A, 167 (1938) 421.
Gray, I., G. P. Miller: J Inst. Metals 93 (1965) 315.
Hansen, M.: Constitution of Binary Alloys. New York 1958, S. 629.
Smith, C. S.: Trans Aime 137 (1940) 321.
Okamoto, M.: Nippon Kinzoku Gakkai-Shi 1938, S. 211.
Jones, D. G., L. B. Pfeil, W. T. Griffiths: J. Inst. Metals 46 (1931) 423.
Robertson, W. D., E. G. Grenier, V. F. Nole: Trans. metallurg. Soc. Aime 221 (1961) 503.
Mudge, W. A., P. D. Merica: Trans Aime 117 (1935) 265.
Merica, P. D.: US Pat. 1 572–744, 1925.
US Pat. 1 755 554; 1 755 555; 1 755 556; 1 755 557, 1930; US Pat. 1 439 865; 1922; 1675264, 1928.
Manenc, J.: Acta metallurg. 7 (1959) 124.
Fuller, T. S.: Trans. Aime 117 (1935) 276.
Mihalisin, J R., R. F. Decker: Trans. metallurg. Soc Aime 218 (1960) 507.
BoNIs, L. J., N. J. Grant: Trans. metallurg. Soc. Aime 224 (1962) 308.
Smith, C. R.: J. Metals 15 (1963) 740.
Smith, G. C.: Powder Metallurg. 11 (1963) 102.
Tracey, V. A., D. K. Worn: Powder Metallurg. 10 (1962) 34.
Mee, P. B., R. A. Sinclair: J. Inst. Metals 94 (1966) 319–326.
Grant, N. J.: In: The Strengthening of Metals. New York 1963, S. 163.
Bradbury, E. J.: In: Metallurgical Achievements. Oxford 1965, S. 153.
WoRN, D. K., S. F. Marton: Powder Metallurg. 9 (1961) 309.
Clarke, C. A., P. B. Mee: Z. Metallkde. 53 (1962) 756.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1970 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Franklin, A.W., Smith, R.A., Wakeman, D.W. (1970). Aushärtungsverhalten. In: Volk, K.E. (eds) Nickel und Nickellegierungen. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-12596-0_4
Download citation
DOI: https://doi.org/10.1007/978-3-662-12596-0_4
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-12597-7
Online ISBN: 978-3-662-12596-0
eBook Packages: Springer Book Archive