Zusammenfassung
Das Verhalten von Tragwerken unter der Einwirkung langsam anwachsender Belastungsvektoren P m (dP/dt> 0, m = 1, 2, 3), die kleine Veränderungen in der Geometrie der Tragwerke verursachen, kann in zwei Hauptphasen eingeteilt werden:
-
a)
Gebrauchslastzustand, damit wird der stabile Gleichgewichtszustand bezeichnet, bei dem jedem beendeten Belastungszuwachs ein entsprechender beendeter Zuwachs der inneren Kräfte und der Verformungen zugeordnet ist. Diese Phase wird durch eine von der Zustandsgleichung des verwendeten Materials und der Art des Tragwerkes abhängige Funktion beschrieben.
-
b)
Zerstörungszustand, bei dem die Konstruktion die Fähigkeit zur Aufnahme von Belastungen verliert und bei gleichbleibender oder nicht wachsender Belastungsintensität μ G P m , =P G in ein geometrisch veränderliches System überführt wird. Der so definierte Zustand wird im folgenden als Grenzzustand des Tragwerkes bezeichnet.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur zu 1
Kazinczy, G.: Bemessung von statisch unbestimmten Konstruktionen unter Berücksichtigung der bleibenden Formänderungen (ungarisch). Betonszemle 1, 2 (1914) Nr. 4, 5, 6.
Kist, N. C.: Führt eine auf das Hookesche Gesetz gegründete Spannungsberechnung zu einer befriedigenden Bemessung von Stahlbrücken und Gebäuden (holländisch). Inaugural-Vortrag, T. H. Delft 1917.
Ingerslev, A.: Om en elementaer Beregningsmaade of krydsarmerede Plader. Ingenioren 30 (1921) S. 507–515.
Johansen, K. W.: Beregning of krydsarmerede Jaernbetonpladers Brudmoment. Bygningsstatiske Meddelelser 3 (1931) S. 1–18.
Johansen, K. W.: Brudlinieteorier. Kopenhagen: Jul. Gjellerup 1943.
Gwosdew, A. A.: Bestimmung des Wertes der Grenzlast für statisch unbestimmte Tragwerke (russisch). Projekt i Standart 3 (1934) No. 8, S. 10–16.
Gwosdew, A. A.: Theorie des Grenzgleichgewichtes (russisch). Moskau: Strojizdat 1949.
Baker, J. F.: A review of recent investigations into the behaviour of steel frames in the plastic range. J. Instn. Civ. Engrs. 31 (1949) S. 188–240.
Baker, J. F., H. R. HORNE u. J. HEYMAN: The Steel Skeleton, Vol. 2. Cambridge: Univ. Press 1956.
Gwosdew, A. A.: Bestimmung der Grenzlast für statisch unbestimmte Tragwerke, die plastischer Deformation unterliegen (russisch). Trudy Konfierencji po plasticzeskim deformacjam. Izdat. Akad. Nauk SSSR, Moskau 1938, S. 19–30.
Dissertation, Inst. Mechaniki Akad. Nauk SSSR, Moskau 1946.
Drucker, D. C., H. J. Greenberg U. W. Prager: The safety factor of an elastic-plastic body in plane strain. J. Appl. Mech. 18 (1951) S. 371–378.
Drucker, D. C., W. Prager U. H. J. Greenberg: Extended limit design theorems for continuous media. Quart. Appl. Math. 9 (1952) S. 381–389.
Hill, R.: A variational principle of maximum plastic work in classical plasticity. Quart. J. Mech. Appl. Math. 1 (1948) S. 18–28.
Hill, R.: On the state of stress in a rigid plastic body at the yield point. Phil. Mag. 42 (1951) S. 868–875.
Prager, W.: General theory of limit design. Proc. 8th Int. Congr. Appl. Mech. (Istambul 1952) 2, Istambul, 1956, S. 65–72.
Hodge, P. G.: The theory of piecewise linear isotropic plasticity. Proc. Colloquium on Deformation and Flow of Solids (Madrid 1955). Berlin/ Göttingen/Heidelberg: Springer 1956, S. 147–169.
Olszak, W.: liber die Grundlagen der Theorie von nichthomogenen elastisch-plastischen Körpern (polnisch). Arch. Mech. Stosow. 6 (1954) S. 493–532, S. 639–656.
Olszak, W.: Plane problems of plastic flow of nonhomogeneous bodies. Bull. Acad. Pol. Sci. Cl. IV, 3 (1955).
Drucker, D. C.: A more fundamental approach to plastic stress-strain relations. Proc. 1st. U. S. Nat. Congr. Appl. Mech. (Chicago 1951). New York 1952, S. 487–491.
Hodge, P. G.: The mathematical theory of plasticity. Surveys in Applied Mathematics, Elasticity, and Plasticity. New York: Wiley 1958, S. 49–144.
Nagidi, P. M.: Stress-strain relations in plasticity and thermoplasticity. Proc. 2nd Symposium on Naval Structural Mechanics (Providence 1960). Oxford: Pergamon Press 1960, S. 121–167.
Literatur zu 1 29
Koiter, W. T.: General theorems for elastic plastic solids. Progress in Solid Mechanics. Amsterdam: North-Holland Publishing 1960, S. 165–221.
von Mises, R.: Mechanik der festen Körper in plastisch deformablem Zustand. Göttinger Nachr., math.-phys. Kl., 1913, S. 582–592.
Reuss, A.: Fließpotential oder Gleitebenen? Z. angew. Math. Mech. 12 (1932) S. 15–24.
Reuss, A.: Vereinfachte Berechnung der plastischen Formänderungsgeschwindigkeiten bei Voraussetzung der Schubspannungsfließbedingung. Z. angew. Math. Mech. 13 (1933) S. 356–360.
Koiter, W. T.: Stress-strain relations, uniqueness and variational theorems for elastic-plastic materials with a singular yield surface. Quart. Appl. Math. 11 (1953) S. 350–354.
Sawczuk, A., u. J. Rychlewski: On yield surfaces for plastic shells. Arch. Mech. Stosow. 12 (1960) S. 29–53.
Prager, W.: An Introduction to Plasticity. Reading, Mass.: Addison-Wesley 1959.
Hodge, P. G.: Plastic Analysis of Structures. New York: McGraw-Hill 1959.
Hill, R.: A note on estimating the yield point loads in a plastic-rigid body. Phil. Mag. 47 (1952) S. 353–355.
Horne, H. R.: Fundamental propositions in the plastic theory of structures. J. Instn. Civ. Engrs. 34 (1949–1950). S. 174–177.
Hill, R.: The Mathematical Theory of Plasticity. Oxford: University Press 1950.
Fejnberg, S. M.: Das Prinzip der Grenzspannung (russisch). Izvestija Akad. Nauk SSSR, Otd. Tech. Nauk, Mechanika i Masinostr. 1959, No 4, S. 101–111.
Drucker, D. C.: Variational principles in the mathematical theory of plasticity. Proc. Symp. Appl. Math. 8 (1956). New York: McGraw-Hill 1958, S. 7–22.
Drucker, D. C.: Plasticity. Proc. 1st Symp. on Naval Structural Mechanics, Stratford University 1958. Oxford: Pergamon Press 1960, S. 407–448.
] Ross, E.: On the effect of boundary and loading conditions in the limit analysis of plastic structures. J. Appl. Mech. 24 (1957) S. 314/15.
Hill, R.: A comparative study of some variational principles in the theory of plasticity. J. Appl. Mech. 17 (1950) S. 64–66.
] Sanowsky, H. A.: A principle of maximum plastic resistance. J. Appl. Mech. 10 (1943) S. A 65—A 68.
Greenberg, H. J.: Complementary minimum principles for an elasticplastiic material. Quart. Appl. Math. 7 (1949) S. 85–95.
Greenberg, H. J.: On the variational principles of plasticity. GDMM Report A 11–54, Brown University, Providence 1949.
Kachanov, L. M.:. Variationsprinzipe für elastisch-plastische Körper (russisch). Prikl. Mat. Mech. 6 (1942) No. 2–3, S. 187–196.
Markov, A. A.: Über Variationsprinzipe in der Plastizitätstheorie (russisch). Prikl. Mat. Mech. 11 (1947) No. 3, S. 339–350.
Christianovitch, S. A.: Ebenes Problem der mathematischen Plastizitätstheorie für auf einer geschlossenen Berandung vorgeschriebene äußere Kräfte (russisch). Matematiczeskij sbornik, Nov. Ser. 1, 43 (1936) No. 4, S. 511–534.
Hodge, P. G., u. W. Prager: A variational principle for plastic materials with strain hardening. J. Math. Phys. 27 (1948) S. 1–10.
Hodge, P. G.: Minimum principles of piece-wise linear isotropic plasticity. J. Rat. Mech. Anal 5 (1956) S. 917–938.
Olszak, W., U. P. PERZYNA: Extremum theorems in the theory of plasticity of nonhomogeneous and anisotropie bodies. Arch. Mech. Stosow. 9 (1957) S. 695–712.
Lee, E. H.: On the significance of the limit load theorems for an elastic-plastic body. Phil. Mag. 43 (1952) S. 549–560.
Bishop, J. F. W.: On the complete solution to problems of deformation of a plastic-rigid material. J. Mech. Phys. Solids 2 (1953) S. 43–53.
Drucker, D. C., H. J. GREENBERG, E. H. LEE U. W. PRAGER: On plastic-rigid solutions and limit design theorems for elastic-plastic bodies. Proc. 1st. U. S. Nat. Congr. Appl. Mech. (Chicago 1951) New York 1952, S. 533–538.
Sokolovsky, V. V.: Theorie der Plastizität. Berlin: VEB-Verlag Technik 1955 (Russische Ausgabe, Moskau: Gostechizdat 1950 ).
Iliuscitin, A. A.: Die Plastizität (russisch). Moskau: Gostechizdat 1948.
Prager, W., u. P. G. Hodge: Theory of Perfectly Plastic Solids. New York: Wiley 1951.
Kachanov, L. H.: Einführung in die Plastizitätstheorie (russisch). Moskau: Gostechizdat 1956.
Drucker, D. C.: On uniqueness in the theory of plasticity. Quart. Appl. Math. 14 (1953) S. 35–42.
Hill, R.: On the problem of uniqueness in the theory of a rigid-plastic solid. J. Mech. Phys. Solids 4 (1956) S. 247–255; 5 (1956) 5. 1–8; 5 (1957) S. 153–161.
Colonetti, G.: Sul problema delle coazioni elastiche. Rend. Accad. Linzei 27, ser. 5a, 1918.
Colonetti, G.: L’équilibre des corps déformables. Paris: Dunod 1955.
Reissner, H.: Eigenspannungen und Eigenspannungsquellen. Z. angew. Math. Mech. 11 (1931) S. 1–8.
Melan, E.: Zur Plastizität des räumlichen Kontinuums. Ing.-Arch. 9 (1938) S. 116.
Drucker, D. C.: A definition of stable inelastic material. J. Appl. Mech. 26 (1959) S. 101–106.
Bishop, J. F. W., A. P. Green u. R. Hill • A note on the deformable region in a rigid plastic body. J. Mech. Phys. Solids 4 (1956) S. 256–258.
Haythornthwaite, R. M., u. R. T. SHIELD: A note on the deformable region in a rigid plastic structure. J. Mech. Phys. Solids 6 (1958) S. 127–131.
Shapiro, G. S.: Über die Einzigkeit des Biegungsproblems einer starrplastischen Platte (russisch). Izv. Akad. Nauk SSSR, Otd. Tech. Nauk, Mechanika i Masinostr. 1959, No. 2, S. 138 /39.
Hill, R.: A general theory of uniqueness and stability in elastic plastic solids. J. Mech. Phys. Solids 6 (1958) S. 236–249.
Koiter, W. T.: Stress strain relations, uniqueness and variational theorems for elastic-plastic materials with a singular yield surface. Quart. Appl. Math. 11 (1953) S. 350–354.
Freudenthal, A. M., u. H. Geiringer: The mathematical theories of the inelastic continuum. Handbuch der Physik Bd. 6, Berlin/Göttingen/Heidelberg: Springer 1958, S. 229–433.
Drucker, D C • Limit analysis and design. Appl. Mech. Rev. 7 (1954) S. 421–425.
Drucker, D. C.: Plastic design methods, Advantages and limitations. Trans. Soc. Naval Arch. Mar. Engrs. 65 (1958) S. 172–190.
Neal, B. G.: The Plastic Methods of Structural Analysis. London: Chapman & Hall 1956; Die Verfahren der plastischen Berechnung biegesteifer Stahlstabwerke (Übersetzung von Ta. JAEGER). Berlin/Göttingen/Heidelberg: Springer 1958.
Beedle, L. S.: Plastic Design of Steel Frames. New York: Wiley 1958.
Reynzax, J.: Progress in plastic design. Proc. 2nd Symp. on Naval Structural Mechanics, Plasticity (Providence 1960), Oxford: Pergamon Press 1960, S. 511–537.
Beedle, L. S.: On the application of plastic design. Proc. 2nd Symp. on Naval Structural Mechanics, Plasticity (Providence 1960), Oxford: Pergamon Press 1960, S. 538–567.
Moyerhzilch, J., E. Olszewski U. M. Łubinski: Wymiarowanie konstrukcji stalowych. Nowe metody, Budownictwo i Architektura, Warszawa 1956.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1963 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Sawczuk, A., Jaeger, T. (1963). Grundlagen der Theorie der Grenzzustände von Tragwerken. In: Grenztragfähigkeits-Theorie der Platten. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-11905-1_1
Download citation
DOI: https://doi.org/10.1007/978-3-662-11905-1_1
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-11906-8
Online ISBN: 978-3-662-11905-1
eBook Packages: Springer Book Archive