Coated Metal pp 85-131 | Cite as

Mechanical Properties of Coatings

  • Leonid I. Tushinsky
  • Iliya Kovensky
  • Alexandr Plokhov
  • Victor Sindeyev
  • Peter Reshedko
Part of the Engineering Materials book series (ENG.MAT.)

Abstract

Elasticity is the ability of a coating material to resist changes in its volume or shape under mechanical stress due to increase in internal energy. The main characteristic of this property is the elasticity modulus (Young’s modulus), which describes the resistance of a coating material to deformation. Numerically it represents the ratio of applied stress increment to the ensuing increment of elastic deformation. In other words, elasticity is a measure of the stiffness of the coating material.

Keywords

Fatigue Titanium Porosity Nickel Chromium 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 2.1
    Alpas AT, Embury JD, Hardwick DA, Springer RW (1990) The mechanical properties of laminated microscale composites of Al/Al203. J Mater Sci 3: 1603–1609CrossRefGoogle Scholar
  2. 2.2
    Anast M, Bell JM, Bell TJ, Ben-Nissan J (1992) Precision ultra-microhardness measurements of sol-gel-derived zirconia thin films. J Mater Sci Lett 11: 1483–1485CrossRefGoogle Scholar
  3. 2.3
    Attar F, Johannesson T (1995) Adhesion and X-ray elastic constant evaluation of CrN coatings. Thin Solid Films 258: 205–212CrossRefGoogle Scholar
  4. 2.4
    Barvinok VA (1990) Stressed state control and properties of plasma-sprayed coatings (in Russian). Mashinostroenie, MoscowGoogle Scholar
  5. 2.5
    Benarioua Y, Bouaouadja N, Wendler B (1996) Carbide formation in titanium coatings deposited on carbon steel. J Mater Sci Lett 15: 1067–1069CrossRefGoogle Scholar
  6. 2.6
    Bianco R, Rapp RA, Smialek JL (1993) Chromium and reactive element modified aluminide diffusion coatings on superalloys: Environmental testing. J Electrochem Soc 140: 1191–1203Google Scholar
  7. 2.7
    Bull SJ, Rickerby DS, Gent JT (1991) Quality assurance assessment of thin films. Surface Eng 7: 143–145Google Scholar
  8. 2.8
    Bulychev SI (1992) Progress and prospects of material testing by continuous impressing of indentor (in Russian). Zavodskaya Laboratoria 3: 29–36Google Scholar
  9. 2.9
    Bulychev SI, Alekhin VP (1990) Testing of materials by continuous indentation (in Russian). Mashinostroenie, MoscowGoogle Scholar
  10. 2.10
    Burnett PJ, Rickerby DS (1987) Assessment of coating hardness. Surface Eng 3: 69–76Google Scholar
  11. 2.11
    Byakova AV (1995) Peculiarities of microhardness determination in the estimation of structural strength of coatings (in Russian). Problemy Prochnosti 9: 44–54Google Scholar
  12. 2.12
    Byakova AV, Gorbach VG (1994) Strength to deformation and estimation of brittle strength of coatings with initial field of residual stresses (in Russian). Problemy Prochnosti 1: 51–57Google Scholar
  13. 2.13
    Castro R, Chard G, Smith Ronald W, Rollett Anthony D, Stanek Paul W (1992) Toughness of dense MoSi2 and MoSi2/tantalum composites produced by low-pressure plasma deposition. Scr Met and Mater 26: 207–212CrossRefGoogle Scholar
  14. 2.14
    Chen HC, Pfender E (1996) Microstructure of plasma-sprayed Ni—Al alloy coating on mild steel. Thin Solid Films 280: 188–198CrossRefGoogle Scholar
  15. 2.15
    Chou TC, Nich TG, McAdams SD, Phar GM (1991) Microstructures and mechanical properties of thin films of aluminum oxide. Scr Met and Mater 25: 2203–2208CrossRefGoogle Scholar
  16. 2.16
    Chou TC, Nich TG, McAdams SD, Phar GM, Oliver WC (1992) Mechanical properties and microstructures of metal/ceramic microlaminates. Part 2. Mo/Al2O3 system. J Mater Res 7: 2774–2784CrossRefGoogle Scholar
  17. 2.17
    Chou TC, Nich TG, Tsui TY, Phar GM, Oliver WC (1992) Mechanical properties and microstructures of metal/ceramic microlaminates. Part 1. Nb/MoSi2 system. J Mater Res 7: 2765–2773CrossRefGoogle Scholar
  18. 2.18
    Crostack HA, Jahnel W, Meyer EH, Selvadurai U (1996) Developments of nondestructive testing of surface coatings. Weld World 37: 114–120Google Scholar
  19. 2.19
    Czerwinski F (1998) Diffusion annealing of Fe—Ni alloy coatings on steel substrates. J Mater Sci 33: 3831–3837CrossRefGoogle Scholar
  20. 2.20
    Dekhtyar LI, Loskutov VS, Zilberman BV (1982) Determination of elastic moduli in heterogeneous materials (in Russian). Fizika I Khimia Obrabotki Materialov 11: 11–14Google Scholar
  21. 2.21
    Deuis RL, Yeliup JM, Subramanian C (1997) Aluminum composite coatings produced by plasma transferred arc surfacing technique. Mater Sci and Technol 13: 511–512CrossRefGoogle Scholar
  22. 2.22
    Diao DF, Sawaki Y (1995) Fracture mechanisms of ceramic coatings during wear. Thin Solid Films 270: 362–366CrossRefGoogle Scholar
  23. 2.23
    Dolgov NA, Lyashenko BA, Veremchuk BS, Dmitriev YuV (1995) On the determination of elastic characteristics of protective coatings (in Russian). Problemy Prochnosti 7: 48–51Google Scholar
  24. 2.24
    Du HL, Datta PK, Lewis DB, Burnell-Gray JS (1996) Enhancement of oxidation/sulphidation resistance of Ti and Ti-6A1–4V alloy by HfV coating. Mater Sci and Eng A 205: 199–208CrossRefGoogle Scholar
  25. 2.25
    Eaton H, Novak R (1986) A study of the effects of variations in parameters on the strength and modulus of plasma-sprayed zirconia. Surface and Coating Technology 3: 257–267CrossRefGoogle Scholar
  26. 2.26
    Engel PA, Chitsaz AR, Hsue EY (1992) Interpretation of superficial hardness for multilayer platings. Thin Solid Films 207: 144–152CrossRefGoogle Scholar
  27. 2.27
    Fedorenko VK, Milman YuV, Kadyrov VK, Ivaschenko RK, Ivaschenko OV (1987) Physical-mechanical properties and destruction of powder detonation coatings (in Russian). Poroshkovaya Metallurgia 11: 88–94Google Scholar
  28. 2.28
    Friesen T, Haupt J, Gissler W, Bata A, Bata PB (1991) Ultrahard coatings from Ti—BN multilayers and by co-sputtering. Surface and Coating Technology 48: 169–174CrossRefGoogle Scholar
  29. 2.29
    Gogotsi GA (1991) Deformation behavior of ceramics. J Eur Ceram Soc 1: 87–92CrossRefGoogle Scholar
  30. 2.30
    Gogotsi GA, Zavada VP (1994) Certification of mechanical properties of modern ceramics (in Russian). Problemy Prochnosti 1: 68–75Google Scholar
  31. 2.31
    Guo Zhongcheng, Yang Xianwan, Liu Hong-Kong, Wang Zhiuin, Wang Min (1996) Characteristics of Re—Ni—B—Al2O3 coating material. Trans Nonferrous Metals Soc China 6: 33–36Google Scholar
  32. 2.32
    Hainsworth SV, Bartlett T, Page TF (1993) The nanoindentation response of systems with thin hard carbon coatings. Thin Solid Films 236: 214–218CrossRefGoogle Scholar
  33. 2.33
    Hankock P, Chien HH, Nicholls JR, Stephenson DJ (1990) In-site measurements of the mechanical properties of aluminide coatings. Surface and Coating Technology 4344: 359–370CrossRefGoogle Scholar
  34. 2.34
    Hardwick DA (1987) The mechanical properties of thin films: a review. Thin Solid Films 154: 109–124CrossRefGoogle Scholar
  35. 2.35
    Harmsworth PD, Stevens R (1992) Phase composition and properties of plasma-sprayed zirconia thermal barrier coatings. J Mater Sci 27: 611–615CrossRefGoogle Scholar
  36. 2.36
    Heinke W, Leyland A, Matthews A, Berg G, Friedrich C, Broszert E (1995) Evaluation of PVD nitride coatings using impact, scratch and Rockwell-C adhesion tests. Thin Solid Films 270: 431–438CrossRefGoogle Scholar
  37. 2.37
    Huang Chi-Tung, Dun Jeng-Gong (1997) Microhardness of (Ti, Al)N films deposited by reactive RF magnetron sputtering. J Mater Sci Lett 16: 59–61Google Scholar
  38. 2.38
    Ilinsky AI, Lyakh GB (1978) Methods of mechanical testing for films and foils ( Review) (in Russian ). Zavodskaya Laboratoria 12: 1507–1511Google Scholar
  39. 2.39
    Jankowski A (1995) Metallic multilayers at the nanoscale. Nanostruct Mater 6: 179190Google Scholar
  40. 2.40
    Jehn HA, Thiergarten F, Ebersbach E, Fabian D (1991) Characterization of PVD ( Ti,Cr)N hard coatings. Surface and Coating Technology 50: 45–52Google Scholar
  41. 2.41
    Jindal PC, Quinto DJ (1988) Load dependence of microhardness of hard coatings. Surface and Coating Technology 3–4: 683–694CrossRefGoogle Scholar
  42. 2.42
    Katayama Sakae, Hashimura Masayuki (1997) Effects of microcracks in CVD coating layers on cemented carbide and cermet substrates on residual stress and transverse rupture strength. Trans ASME J Manuf Sci and Eng 119: 50–54CrossRefGoogle Scholar
  43. 2.43
    Kerkush IR, Melnik PI (1997) Properties improvement of plasma-sprayed iron coatings by chromium plating. Poroshkovaya Metallurgia 40: 230Google Scholar
  44. 2.44
    Khasui A, Morigaki 0 (1985) Hard Facing and Sputtering (in Russian). Mashinostroenie, MoscowGoogle Scholar
  45. 2.45
    Kiiski AA, Ruuskanen PR, Rubin JB (1996) Wear resistant coatings produced by shock-wave compaction of powders. Met and Mater Trans A 27: 2297–2304CrossRefGoogle Scholar
  46. 2.46
    Kobayashi A, Yamahiji K, Kitamura T (1991) Effect of heat treatment on high hardness zirconia sprayed coating by means of gas tunnel type plasma spraying. Trans JWRI 20: 47–52Google Scholar
  47. 2.47
    Kolawa E, Sun X, Reid JS, Chen JS, Nickolet MA, Ruis R (1993) Amorphous W40Re40B20 diffusion barriers for *Si>/Al and *Si>/Cu metallizations. Thin Solid Films 236: 301–305CrossRefGoogle Scholar
  48. 2.48
    Kovensky IM, Povetkin VV (1999) Physical metallurgy of coatings (in Russian). Joint Venture “Internet Engineering”, MoscowGoogle Scholar
  49. 2.49
    Krus D (Jr), Hoffman RW (1993) Finite element studies of tensile testing on thin film multilayers. Thin Solid Films 236: 225–229CrossRefGoogle Scholar
  50. 2.50
    Kudinov VV, Ivanov VM (1981) Plasma deposition of high-melting coatings (in Russian). Mashinostroenie, MoscowGoogle Scholar
  51. 2.51
    Kuhnemann S, Kopacz U, Jehn H (1987) Erfahrungen beim Einsatz eines Ultramikrohartetesters zur Prufung von dünnen Hartstoffschichten (in German). Prakt Metallogr 24: 382–390Google Scholar
  52. 2.52
    Kuroda S, Clyne TW (1991) The quenching stress in thermally sprayed coatings. Thin Solid Films 1: 49–66CrossRefGoogle Scholar
  53. 2.53
    La Fontaine WR, Paszkiet CA, Korhonen MA, Li Che-Yu (1991) Residual stress measurements of thin aluminum metallizations by continuos indentation and X-ray stress measurement techniques. J Mater Res 6: 2084–2090CrossRefGoogle Scholar
  54. 2.54
    Landa NI, Shpindler SS, Kolechkin YuK (1988) Installation for determination of impact viscosity of ceramics (in Russian). Zavodskaya Laboratoria 9: 1138–1140Google Scholar
  55. 2.55
    Lawrynowicz DE, Wolfenstine J, Lavernia EJ (1995) Reactive synthesis and characterization of MoSi2/SiC using low-pressure plasma deposition and 100% methane. Scr Met and Mater 32: 689–693CrossRefGoogle Scholar
  56. 2.56
    Lyashenko BA, Veremchuk BS, Dolgov NA, Ivanov VM (1996) Investigation of strength and strain properties of compounds with plasma deposited coatings (in Russian). Problemy Prochnosti 6: 57–60Google Scholar
  57. 2.57
    Ma Dejun, Xu Kewei, He Jiawen (1997) Numerical simulation for measuring yield strength of thin metal film by nanoindentation method. Trans Nonferrous Metals Soc China 7: 66–68Google Scholar
  58. 2.58
    Mahajan S, Wen JG, Ito W, Yoshida Y, Kubota N, Liu CJ, Morishita T (1994) Growth and superconductivity of C-axis in plane aligned YBa2Cu3O7 films fabricated by the self-template method. Appl Phys Lett 65: 3129–3131CrossRefGoogle Scholar
  59. 2.59
    Maksimovich GT (1974) Micromechanical studies of properties of metals and alloys (in Russian). Nauchnaya Mysl, KievGoogle Scholar
  60. 2.60
    Mehrotra PK, Quinto DT (1986) High-temperature microhardness profiles of hard CVD coatings. High Temp—High Pressures 18: 199–210Google Scholar
  61. 2.61
    Monaghan DP, Teer DG, Laing KC, Logan PA (1994) The state-of-the-art in thin protective coatings. Surface Technol Int June: 2–5Google Scholar
  62. 2.62
    Murakami Kenji, Okamoto Taira, Matsumoto Miroshi, Miyamoto Yoshinari, Irisana Tsuyoshi (1993) Structure and mechanical properties of thermal-sprayed nickel-20 wt% chromium alloy. Mater Sci and Eng A 160: 181–187CrossRefGoogle Scholar
  63. 2.63
    Müller D, Fromm E (1995) Mechanical properties and adhesion strength of TiN and AI coatings on HSS, steel, aluminum and copper characterized by four testing methods. Thin Solid Films 270: 411–416CrossRefGoogle Scholar
  64. 2.64
    Ostojic P, Berndt CC (1988) The variability in strength of thermally sprayed coatings. Surface and Coating Technology 34: 43–50CrossRefGoogle Scholar
  65. 2.65
    Perry AJ, Jagner M, Wolner PF, Sproul WD (1990) Aspects of residual stress measurements in TiN prepared by reactive sputtering. Surface and Coating Technology 13: 234–244CrossRefGoogle Scholar
  66. 2.66
    Pisarenko GS, Lyashenko BA, Kozub YN (1997) Methods of high-temperature mechanical testing of inorganic heat-resistant coatings. In: Pisarenko GS (ed) Heat-resistant coatings for protection of constructional materials (in Russian). Nauka, Leningrad, pp 50–60Google Scholar
  67. 2.67
    Quinn G (1989) Flexure testing of advanced ceramics. Br Ceram Trans J 3: 94–95Google Scholar
  68. 2.68
    Sampath S, Gansert R, Herman H (1995) Plasma-spray forming ceramics and layered composites. JOM: J Miner, Metals and Mater Soc 47: 30–33Google Scholar
  69. 2.69
    Sampath S, Tiwari R, Gredmundsson B, Herman H (1991) Microstructure and properties of plasma-sprayed consolidated two-phase nickel aluminides. Scr Met and Mater 25: 1425–1430CrossRefGoogle Scholar
  70. 2.70
    Saunders SR, Vetters HR (1997) Standardization of test methods for the mechanical properties of thin coatings. Thin Solid Films 299: 82–87CrossRefGoogle Scholar
  71. 2.71
    Seino Y, Hida N, Nagai S (1992) Mechanical properties of diamond thin films prepared by chemical vapor deposition. J Mater Sci Lett 11: 515–517CrossRefGoogle Scholar
  72. 2.72
    Sglavo VM, Dal Maschio R (1990) Adhesion testing of plasma-sprayed ceramic coatings on metals by an indentation technique. Eur Appl-Res Repts Nucl Sci and Technol Sec 7: 1487–1494Google Scholar
  73. 2.73
    Smagorinski M, Tsantrizos P, Grenier S, Entazarian M, Ajersch F (1996) The thermal plasma near-netshape spray forming of Al composites JOM: J Miner, Metals and Mater Soc 48: 56–59Google Scholar
  74. 2.74
    Takeda Koichi, Ito Mitihisa, Takeuchi Sunao, Sudo Katui, Koda Masamichi, Kazama Koichi (1993) Erosion resistant coating by low-pressure plasma spraying. ISJI International 33: 976–981CrossRefGoogle Scholar
  75. 2.75
    Tamura Motonori, Fukuda Kanao (1993) Properties and tribological behavior of Ti(C,N) coatings deposited by reactive ion plating. ISIJ International 33: 949–956CrossRefGoogle Scholar
  76. 2.76
    Tushinsky LI, Sindeev VI, Plokhov AV (1996) The structure and mechanical properties of modified surfaces of engineering materials (in Russian). Novosibirsk State University Press, NovosibirskGoogle Scholar
  77. 2.77
    Vaidya R, Zurek AK, Castro R, Wolfenden A, Hosman SL, Subramanian KN (1994) Alumina coated Ti-25A1–10Nb-3V–1Mo for improved oxidation resistance. J Adv Mater 26: 16–22Google Scholar
  78. 2.78
    Vally JA (1986) A review of adhesion test methods for thin hard coatings. J Vac Sci and Technol A 4: 3007–3014CrossRefGoogle Scholar
  79. 2.79
    Vally JA, Molarius JM, Korhonen AS (1987) The effect of nitrogen content on the critical normal force in scratch testing of TiN films. Thin Solid Films 154: 351–360CrossRefGoogle Scholar
  80. 2.80
    Vancoille E, Celis JP, Roos JR (1993) Mechanical properties of heat-treated and worn PVD TiN, (Ti,A1)N, ( Ti,Nb)N and Ti(C,N) coatings as measured by nanoindentation. Thin Solid Films 224: 168–176Google Scholar
  81. 2.81
    Voevodin AA, Spassky SE, Erokhin AL (1991) Determination of thin coating micro-hardness with consideration of its thickness and hardness of the substrate (in Russian). Zavodskaya Laboratoria 10: 45–46Google Scholar
  82. 2.82
    Wang HF, Yang X, Bangert H, Torzicky P, Wen L (1992) Two-dimensional finite element method simulation of Vickers indentation of hardness measurements on TiNcoated steel. Thin Solid Films 214: 68–73CrossRefGoogle Scholar
  83. 2.83
    Wang M, Schmidt K, Reichelt K, Jiang X, Hübsch H, Dimigen H (1992) The proper- ties of W—C films deposited by reactive rf sputtering. J Mater Res 7: 1465–1472CrossRefGoogle Scholar
  84. 2.84
    Wen LS, Zhang HT, Zhou XK, Guan K, Liao B, Cao S (1987) Acoustic emission research on the fracture behavior of plasma-sprayed Ni—Al coatings during bend testing. Surface and Coating Technology 30: 115–123CrossRefGoogle Scholar
  85. 2.85
    Whitehead AJ, Page TF (1992) Nanoindentation studies of thin film coated systems. Thin Solid Films 220: 277–283CrossRefGoogle Scholar
  86. 2.86
    Zaitsev GG, Barabanov AF, Kuteinikov AF (1980) Determination of elastic constants of graphitized carbon materials by dynamic methods in the temperature range of 203000 °C ( Review) (in Russian ). Zavodskaya Laboratoria 1: 81–86Google Scholar
  87. 2.87
    Zhang N, Wang Y (1992) Dislocations and hardness of hard coatings. Thin Solid Films 214: 4–5CrossRefGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2002

Authors and Affiliations

  • Leonid I. Tushinsky
    • 1
    • 2
    • 3
    • 4
    • 5
  • Iliya Kovensky
    • 6
  • Alexandr Plokhov
    • 7
  • Victor Sindeyev
    • 8
  • Peter Reshedko
    • 9
  1. 1.Materials Science FacultyNovosibirsk State Technical UniversityNovosibirskRussia
  2. 2.Center for Problems of Modern Materials ScienceNovosibirskRussia
  3. 3.School Academy of SciencesNovosibirskRussia
  4. 4.Technical UniversityPoland
  5. 5.Pridneprovsky Academy of Civil Engineering and ArchitectureUkraine
  6. 6.Tyumen State Oil UniversityTyumenRussia
  7. 7.Materials Science FacultyNovosibirsk State Technical UniversityNovosibirskRussia
  8. 8.Novosibirsk State Technical UniversityNovosibirskRussia
  9. 9.Electromechanics FacultyNovosibirsk State Technical UniversityNovosibirskRussia

Personalised recommendations