Abstract
The damage behaviour of composites is of interest for the purpose of development and application of materials. The strength and lifetime of composite materials are determined by the stress stages of the initiation of micro-failure processes and by the transition of the damage from a subcritical stage to a critical stage. Inter-fibre fracture, delamination and fibre failure are processes of special importance. The damage behaviour of composite materials depends considerably on the crack resistance of the matrix, on the debonding energy of the fibre—matrix interface and, finally, on the delamination resistance of the layers of the composite.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
CARP Aerospace/Advanced Composites Subcommittee (1993): Guidance for development of AE applications on composites. J. Acoust. Emiss. 11 (3): C1 — C24
Bohse J., Kroh G. (1992): Micromechanics and acoustic emission analysis of the failure process of thermoplastic composites. J. Mat. Sci. 27: 298–306
Downs K. S., Hamstad M. A. (1996): Wave propagation effects relative to AE source distinction of wideband AE Signals from a composite pressure vessel. J. Acoust. Emiss 14 (34): 61–73
Gorman M. R. (1991): Plate wave acoustic emission. J. Acoust. Soc. Am. 90 (1): 358–364
Gorman M. R., Ziola S. M. (1991): Plate waves produced by transverse matrix cracking. Ultrasonics 29: 245–251
Gorman M. R., Prosser W. H. (1991): AE source orientation by plate wave analysis. J. Acoust. Emiss. 9: 283–288
Guo D., Ajit M., Ono K. (1996): Wave theory of acoustic emission in composite laminates. J. Acoust. Emiss 14. 19–46
Prosser W. H., Jackson K.E., Kellas S., Smith B. T., McKeon J., Friedman A. (1995): Advanced waveform-based acoustic emission detection of matrix cracking in composites. Mater. Evaluat. 53: 1052–1058
Prosser W. H. (1996): Advanced AE techniques in composite materials research. J. Acoust. Emiss. 14: 1–11
Soden P. D., Hinton M. J., Kaddour A. S. (1998): A comparison of the predictive capabilities of current failure theories for composite laminates. Compos. Sci. Technol. 58 (8): 1225–1254
Puck A., Schürmann H. (1998): Failure analysis of FRP laminates by means of physically based phenomenological models. Compos. Sci. Technol. 58 (7): 1045–1067
Davies P. (Ed.) (1993): Protocols for Interlaminar Fracture Testing of Composites. ESIS, available from Marine Materials Laboratory, IFREMER, Centre de Brest, BP 70, 29280 Plouzane, France
Brunner A. J., Flüeler P., Davies P., Blackman B. R. K., Williams J. G. (1996): Determination of the delamination resistance of fibre-reinforced composites: current scope of test protocols and future potential. In: Proceedings of ECCM7, Seventh European Conference on Composite Materials, London, UK, May 14–16, Vol. 2: 3–8
Lauke B., Schultrich B., Pompe W. (1990): Theoretical considerations of toughness of short-fiber-reinforced thermoplastics. Polym. Plast. Technol. Engng. 29 (7 & 8): 607–806
Lauke B., Friedrich K. (1992): Fracture toughness modelling of fibre reinforced composites by crack resistance curves. Adv. Compos. Mater. 2 (4): 261–275
Bohse J., Grelhnann W., Seidler S. (1991): Micromechanical interpretation of fracture toughness of particulate-filled thermoplastics. J. Mat. Sci. 26: 6715–6721
Krietsch T., Bohse J. (1998): Classification of damage mechanisms in fibre composites by acoustic emissions. In: Proceedings of the 23rd European Conference on Acoustic Emission, Vienna, Austria, May 6–8: 9–14
Krietsch T., Bohse J. (1998): Selection of acoustic emissions and classification of damage mechanisms in fibre composite materials. In: Proceedings of Progress in Acoustic Emission IX, International Acoustic Emission Conference, Big Island, Hawaii, USA, August 9–14: IV-30–39
Hampe A., Marotzke C. (1997): The energy release rate of the fibre/polymer matrix interface: measurement and theoretical analysis. J. Reinf. Plast. Compos. 16 (4): 341–352
Bohse J., Krietsch T. (1998): Interpretation of fracture toughness in unidirectional glassfiber/polypropylene composites by acoustic emission analysis of damage mechanisms. In: Proceedings of Progress in Acoustic Emission IX, International Acoustic Emission Conference, Big Island, Hawaii, USA, August 9–14: V-55–62
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2001 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Bohse, J., Krietsch, T. (2001). Damage Analysis of Composite Materials by Acoustic-Emission Examination. In: Grellmann, W., Seidler, S. (eds) Deformation and Fracture Behaviour of Polymers. Engineering Materials. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-04556-5_26
Download citation
DOI: https://doi.org/10.1007/978-3-662-04556-5_26
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-07453-0
Online ISBN: 978-3-662-04556-5
eBook Packages: Springer Book Archive