Zusammenfassung
Untersucht wird das Ausbeulen dünner, ebener, rechteckiger Platten durch in ihrer Ebene wirkende Kräfte.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur
zu Kap. IV A
Bengston, H. W.: Ship Plating under Compression and Hydrostatic Pressure. Trans. Soc. Naval Architects Marine Engrs., Bd. 47 (1939) S. 80.
Bleich, F.: Die Stabilität dünner Wände gedrückter Stäbe. Prelim. Pubs. first Congr. Intern. Assoc. Bridge and Structural Eng., Paris, 1932, S. 130.
Boobnow, J.: Theory of Structure of Ships. Bd. 2, S. 515 (russisch). St. Petersburg 1914.
Godfrey, H. J. u. I. Lyse: Investigation of Web Buckling in Steel Beams. Trans. Amer. Soc. civ. Engrs., Bd. 100 (1935) S. 675.
Hill, H. N.: Chart for Critical Compressive Stress of Flat Rectangular Plates. N. A. C. A. Techn. Note 773, 1940.
Houbolt, J. C. u. E. Z. Stowell: Critical Stress of Plate Columns. N. A. C. A. Tech. Note 2163, 1950.
Kroll, W. D., G. P. Fisher u. G. J. Heimerl: Charts for Calculation of the Critical Stress for Local Instability of Colums with I-, Z-, Channel-, and Rectangulartube Section. N. A. C. A. Wartime Rept. L-429, 1943.
Levy, S.: Buckling of Rectangular Plates with Built — in Edges. Trans. Amer. Soc. mech. Engrs., Bd. 64 (1942) S. A 171.
Lundquist, E. E.: Local Instability of Centrally Loaded Columns of Channelsection and Z-section. N. A. C. A. Tech. Note 722, 1939.
Lundquist, E. E. u. E. Z. Stowell: Critical Compressive Stress for Flat Rectangular Plates Supported along all Edges and Elastically Restrained against Rotation along the Unloaded Edges. N. A. C. A. Tech. Note 733, 1942.
Lundquist, E. E. u. E. Z. Stowell: Critical Compressive Stress for Outstanding Flanges. N. A. C. A. Tech. Note 734, 1942.
Marguerre, K. u. A. Kromm: Verhalten eines von Schub- und Druckkräften beanspruchten Plattenstreifens oberhalb der Beulgrenze. Luftf.-Forschg., Bd. 18 (1938) S. 627.
Maulbetsch, J. L.: Buckling of Compressed Rectangular Poates with Built — in Edges. Trans. Amer. Soc. mech. Engrs., Bd. 4 (1937) S. A 59.
Meissner, E.: Über das Knicken kreisringförmiger Scheiben. Schweiz. Bauztg., Bd. 101 (1933) S. 87.
Nadai, A.: Über das Ausbeulen von kreisförmigen Platten. Z. VDI, 1915, S. 169.
Olsson, R. G.: Knickung der Kreisringplatte von quadratisch veränderlicher Steifigkeit. Ing.-Arch., 1938, S. 205.
Sazawa, K., U. W. Watanabe: Buckling of a Rectangular Plate with Four Clamped Edges. Re-examined with Improved Theory. Repts. Tokyo Imp. Univ. Aeronaut. Research Inst., Bd. 11 (1936) Nr. 143.
Shuleshko, P.: Buckling of Rectangular Plates Uniformly Compressed in Two Perpendicular Directions with One Free Edge and Opposite Edge Elastically Restrained. Journal of Applied Mechanics, Vol. 23 (Sept. 1956), Nr. 3, S. 359.
Shuleshko, P.: Buckling of Rectangular Plates with Two Unsupported Edges. Journal of Applied Mechanics, Vol. 24, (Dec. 1957), Nr. 4, S. 537.
Zetlin, L.: Elastic Instability of Flat Plates Subjected to Partial Edge Loads. Proc. Amer. Soc. civ. Engrs., Vol. 81 (1955) S. 795.
zu Kap. IV B
Gerard, G.: Critical shear stress of plates above the proportional limit. Journ. Appl. Mech., Bd. 5 (1948) Nr. 1, S. 7.
Gerard, G.: Secant Modulus Method for Determining Plate Instability above the Proportional Limited. Journ. Aeronaut., Bd. 13 (1946) S. 38.
Hoff, N. J.: Note on Inelastic Buckling. Journ. Aeronaut. Sci., Bd. 11 (1944) S. 163.
Kaufmann, W.: Über unelastisches Knicken rechteckiger Platten. Ing.-Arch., Bd. 7 (1936) S. 156.
Levy, S., K. L. Fienup u. R. M. Wooley: Analysis of Square Shear Web above Buckling Load. N. A. C. A. Tech. Note 962, 1945.
zu Kap. IV C
Gaber, E.: Beulversuche an Modellträgern aus Stahl. Bautechn., 1944, S. 6.
Hoff, N. J., B. A. Boley u. J. M. Coan: The Development of a Technique for Testing Stiff Panels in Edgewise Compression. Proc. S. E. S. A., Bd. 5 (1948) Nr. 2, S. 14.
Moore, R. L.: Observations on the Behavior of Aluminium Alloy Test Girders. Trans. Amer. Soc. civ. Engrs., Bd. 112 (1947) S. 901.
Sandlin, C. W. Jr.: Strenght Tests of Shear Webs with Uprights not Connected to the Flanges. N. A. C. A. Tech. Note 1635, 1948.
Stockholm: Versuche über das Ausbeulen der Stegbleche von Stahlträgern, ausgeführt 1934–1935 durch die Hafenverwaltung Stockholm, die schwedischen Staatsbahnen und die Gesellschaft für Elektroschweißung, Stockholm.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1958 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Kollbrunner, C.F., Meister, M. (1958). Die verschiedenen Beulfälle. In: Ausbeulen. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-01090-7_4
Download citation
DOI: https://doi.org/10.1007/978-3-662-01090-7_4
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-01091-4
Online ISBN: 978-3-662-01090-7
eBook Packages: Springer Book Archive