Zusammenfassung
Large gas engines currently play an important role in decentralized energy supply concepts worldwide and will continue to do so in the future. Over the years, a broad spectrum of combustion concepts has been developed for gas engines. Some of these concepts make use of external mixture formation with port injection gas valves while others employ internal mixture formation with high-pressure direct injection gas valves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur
Bartsch, H.-J.: “Taschenbuch mathematischer Formeln für Ingenieure und Naturwissenschaftler”, 22. Edition, Munich, 2011, p. 653f.
Bosch, W.: “Der Einspritzgesetzindikator, ein neues Meßgerät zur direkten Bestimmung des Einspritzgesetzes von Einzeleinspritzungen”, in: “Motortechnische Zeitschrift”, Vol. 25, Issue No. 7, 1964, pp. 268-282.
Caterpillar Inc.: “Gaseous common rail fuel systems and high compression ratio engine using same”, United States Patent No. US 9,200,560 B2, 2015.
Fimml, W.; Chmela, F.; Wimmer, A.: “Verfahren zur Messung der Einspritzrate unter motornahen Bedingungen”, contribution at conference: “7. Tagung: Diesel- und Benzindirekteinspritzung”, Berlin, 2010.
Heywood, J.: “Internal Combustion Engine Fundamentals” (= technical book series: Holman, J. (ed.): “McGraw-Hill Series in Mechanical Engineering), New York, 1988, p. 294.
IAV GmbH: “IAV Injection Analyzer pneumatic for Gaseous-Fuel Engine Applications”, Berlin, 2017.
Luo, F.; Cui, H.; Dong, S.: “Transient measuring method for injection rate of each nozzle hole based on spray momentum flux”, in: “Fuel”, Vol. 125, 2014, pp. 20-29.
Mooser, D.: “Brenngase und Gasmotoren”, in: Mollenhauer, K.; Tschöke, H. (eds.): “Handbuch Dieselmotoren”, 3. Edition, Berlin Heidelberg New York, 2007, pp. 132ff.
Payri, R.; García, J.M.; Salvador, F.J. et al: “Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics”, in: “Fuel”, Vol. 125, 2014, pp. 20-29.
Redtenbacher, C.; Kiesling, C.; Wimmer, A. et al.: “Dual Fuel Brennverfahren – Ein zukunftsweisendes Konzept vom PKW- bis zum Großmotorenbereich?”, in: Lenz, H. P. (Hrsg.): “37. Internationales Wiener Motorensymposium 28. – 29. April 2016. Band 2: zweiter Tag”, Düsseldorf, 2016, pp. 403-428.
Schmid, K.; Greve, M.: “Modellbasierter Entwurf hochdynamischer Regler für Gasmotoren”, in: WTZ Roßlau gGmbH (ed.): “Proceedings, 7th Dessau Gas Engine Conference”, Dessau, 2011, pp. 128-156.
Trapp, C.; Böwing, R.; Tinschmann, G.: “Off-Highway-Gasmotoren”, in: van Basshuysen, R. (ed.): “Erdgas und erneuerbares Methan für den Fahrzeugantrieb; Wege zur klimaneutralen Mobilität”, Wiesbaden, 2015, pp. 465ff.
Verdolini, E.; Vona, F.; Popp, D.: “Bridging the Gap: Do Fast Reacting Fossil Technologies Facilitate Renewable Energy Diffusion?”, National Bureau of Economic Research working paper 22454, Cambridge, Massachusetts, 2016.
Warnecke, W.; Karanikas, J.; Levell, B.; Mesters, C.; Schreckenberg, J.; Adolf, J.: “Gas – A Bridging Technology for Future Mobility?”, contribution at: “34th International Vienna Motor Symposium”, Vienna, 2013.
Wimmer, A.; Golloch, R.; Auer, M.: “Großgasmotoren”, in: Merker, G.; Teichmann, R. (eds.): “Grundlagen Verbrennungsmotoren; Funktionsweise und alternative Antriebssysteme, Verbrennung, Messtechnik und Simulation”, 8. Edition, Wiesbaden, 2017, p. 216.
Zeuch, W.: “Neue Verfahren zur Messung des Einspritzgesetzes und der Regelmäßigkeit von Diesel-Einspritzpumpen”, in: “Motortechnische Zeitschrift”, Vol. 22, Issue No. 9, 1961, pp. 344-349.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Fachmedien Wiesbaden GmbH, ein Teil von Springer Nature
About this paper
Cite this paper
Kiesling, C., Tilz, A., Nickl, A., Winter, H., Pirker, G., Wimmer, A. (2019). Evaluation of Gas Injection Valves for Large Engines by Means of Spray Momentum Measurement. In: Tschöke, H., Marohn, R. (eds) 11. Tagung Einspritzung und Kraftstoffe 2018. Proceedings. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-23181-1_24
Download citation
DOI: https://doi.org/10.1007/978-3-658-23181-1_24
Published:
Publisher Name: Springer Vieweg, Wiesbaden
Print ISBN: 978-3-658-23180-4
Online ISBN: 978-3-658-23181-1
eBook Packages: Computer Science and Engineering (German Language)