Zusammenfassung
Kunststoffoberflächen können mithilfe unterschiedlicher Verfahren gezielt aufs anschließende Kleben vorbereitet werden. Die jeweils richtige Vorbehandlung soll die Substratoberfläche sowohl auf den einzusetzenden Klebstoff einstellen als auch durch die damit erfolgte Konditionierung zur Prozesssicherheit der Klebung beitragen. Alle vorgestellten Vorbehandlungstechniken haben ihre Vor- und Nachteile. Welche Oberflächenvorbehandlung gewählt werden sollte, hängt von folgenden Faktoren ab:
-
Art und Menge der auftretenden Kontaminationen bzw. Randschichten,
-
Art des Kunststoffs (Polarität des Materials, Beständigkeit des Materials gegenüber Lösungsmittel, Wärme etc.),
-
Größe der zu klebenden Kunststoffbauteile bzw. Halbzeuge,
-
Geometrie der Klebflächen (flach, komplex 3D geformt bzw. flächige Klebung,
-
Stückzahl der zu klebenden Bauteile (manuell, automatisiert),
-
Taktzeit und Größe der Klebfläche (Flächenleistung),
-
HSE-Aspekte (Health, Safety and Environment Protection) und Fertigungsumgebung,
-
Investitions- und Betriebskosten.
Somit muss die gewählte Vorbehandlungstechnik ein recht umfangreiches und individuelles Anforderungsprofil erfüllen. Für besonders hochwertige Klebungen mit extremen Anforderungen an deren Langzeitstabilität werden zum Teil auch hybride Vorbehandlungsmethoden eingesetzt.
Literatur
Fraunhofer IFAM. Kurs „DVS®/EWF-Klebfachingenieur“
Gleich, H., Hartwig, A., Lohse, H.: Warum das Vorbehandeln so wichtig ist. Adhäsion 60(9), 34–38 (2016)
Liebel, G., Bischoff, R.: Vorbehandlung von Kunststoffoberflächen. Kunststoffe 77(4), 373–376 (1987)
Armbruster, K., Osterhold, M.: Vorbehandlungsmethoden und Benetzungsfähigkeit von Kunststoffen. Metalloberfläche 44(11), 517–519 (1990)
Bischoff, R.: Einfluss verschiedener Oberflächenvorbehandlungen auf Klebbarkeit, Alterung und Oberflächenbeschaffenheit von Polypropylen. Dissertation an der TU Berlin 1988, Klebstoff-Dokumentum. Hinterwaldner-Verlag, München (1988)
Gleich, H., Criens, R.M., Moslé, H.G., Leute, U.: The influence of plasma treatment on the surface properties of high performance thermoplastics. Int J Adhesion Adhes 9(2), 88–94 (1989)
Gleich, H., Hansmann, H.: Niederdruck-Plasmabehandlung zur gezielten Modifizierung thermoplastischer Fügeflächen, Teil 1: Einfluss der Prozessparameter und Prozessoptimierung. Adhäsion 35(1/2), 15–19 (1991)
Gleich, H.: Zusammenhang zwischen Oberflächenenergie und Adhäsionsvermögen von Polymerwerkstoffen am Beispiel von PP und PBT und deren Beeinflussung durch die Niederdruck-Plasmatechnologie. Dissertation an der Universität Duisburg-Essen (2004)
Hansmann, J.: Corona-Oberflächenbehandlung. Adhäsion 23(5), 136–142 (1979)
Bloss, F.P.: Klebflächenvorbehandlung bei Formteilen mit der Freistrahlelektrode. Klebtechnisches Forum – Neue und bewährte Verfahren der Klebtechnik, Düsseldorf, 13.–14. Juni (1988)
Noeske, M., Jost, D., Strudthoff, S., Lommatzsch, U.: Plasma jet treatment of five polymers at atmospheric pressure: surface modifications and the relevance for adhesion. Int J Adhesion Adhesives 24(2), 171–177 (2004)
Tiller, H.-J., Helbig, M., Gorski, D., Leutheuser, J.: Umweltfreundlich Vorbehandeln von Metallen, Glas, Keramik – für Lackierungen und Verklebungen – mit der Silicatortechnologie. Informationsbroschüre. SurA GmbH, Jena (1999)
Tiller, H.-J.: Silicoating – Grundlage für einen dauerhaften randspaltfreien, feuchtigkeitsbeständigen Metall-Kunststoff-Verbund. Jena (1999)
Bauer, G.P.: Gute Lackhaftung mit Fluorierung: Kunststoffoberflächen richtig vorbehandeln. besser lackieren Nr. 17., S. 7 (2000)
Milker, R., Koch, A.: Fluor – macht den Kunststoff gefügig. Adhäsion 33(5), 33–35 (1989)
Fischer, S.: Kunststoffteile im Innen- und Außenberiech fluorieren und einschichtig lackieren. besser lackieren Nr. 17., S. 5 (2000)
Habenicht, G.: Kleben. Springer, Heidelberg (1997)
Noeske, M., Degenhardt, J., Strudthoff, S., Lommatzsch, U.: Plasma jet treatment of five polymers at atmospheric pressure. Int J Adh Adhs 24, 171–177 (2004)
Liston, E., Martinu, L., Wertheimer, M.R.: Plasma surface modification of polymers for improved adhesion: a critical review. J Adhesion Sci Technol 7, 1091–1127 (1993)
Römpp online Lexikon der Chemie Georg Thieme Verlag (2008)
Lommatzsch, U., Ihde, J.: Plasma polymerization of HMDSO with an atmospheric pressure plasma jet for corrosion protection of aluminium and low-adhesion surfaces. Plasma Process Polym 6, 642 (2009)
Beer, T., Knospe, A., Buske, C.: Atmosphärisches Plasma in der Medizintechnik. In: Life Sci. Engin. Springer, Berlin (2009)
Melamies, I.: Klebtechnikeinsatz in gigantischen Flüssiggastankern – Sicherer LNG-Transport dank richtiger Vorbehandlung. Adhäsion 06/2007, 12–15 (2007)
Lommatzsch, U.: AiF-Forschungsvorhaben 12651 N/1: Untersuchung zur Vorbehandlung von Polymerwerkstoffen und Metallen mittels potentialfreier Atmosphärendruck-Plasmen. Schlussbericht des AiF-Forschungsvorhabens 12651 N/1. Bremen (2003)
Noeske, M., Degenhardt, J., Strudthoff, S., Lommatzsch, U.: Plasma jet treatment of five polymers at atmospheric pressure: surface modifications and the relevance for adhesion. Int J Adhesion Adhes 24, 171–177 (2004)
Lommatzsch, U., Pasedag, D., Baalmann, A., Ellinghorst, G., Wagner, H.-E.: Atmospheric pressure plasma jet treatment of polyethylene surfaces for adhesion improvement. Plasma Process Polym 4, 1041–1045 (2007)
Baeuerle, D., Arenholz, E., Svorcik, V., Heitz, J., Luk’yanchuk, B.S., Bityurin, N.M.: Laser-induced surface modifications, structure formation, and ablation of organic polymers (1995)
Lippert, T., Dickinson, J.T.: Chemical and spectroscopic aspects of polymer ablation: special features and novel directions. Chem Rev 103(2), 453–486 (2003)
Satas, D.: Plastics finishing and decoration. Van Nostrand Reinhold, New York (1986)
Ball, Z., Hopp, B., Csete, M., Ignácz, F., Rácz, B., Sauerbrey, R., Szabó, G.: Transient optical properties of excimer-laser-irradiated polyimide. Appl Phys A Mater Sci Process 61(5), 547–551 (1995)
Lippert, T., Bennett, L.S., Nakamura, T., Niino, H., Ouchi, A., Yabe, A.: Comparison of the transmission behavior of a triazeno-polymer with a theoretical model. Appl Phys A Mater Sci Process 63(3), 257–265 (1996)
Srinivasan, R., Hall, R.R., Loehle, W.D., Wilson, W.D., Allbee, D.C.: Chemical transformations of the polyimide Kapton brought about by ultraviolet laser radiation. J Appl Phys 78(8), 4881 (1995)
Lu, J., Deshpande, S.V., Gulari, E., Kanicki, J., Warren, W.L.: Ultraviolet light induced changes in polyimide liquid-crystal alignment films. J Appl Phys 80(9), 5028 (1996)
Achereiner, F.: Verbesserung von Adhäsionseigenschaften verschiedener Polymerwerkstoffe durch Gasphasenfluorierung. Diss. Univ. Erlangen, S. 1–156 (2009)
Habenicht, G.: Kleben: Grundlagen, Technologien, Anwendungen, 5. Aufl. Springer, Berlin Heidelberg New York (2009)
Pocius, A.V.: Adhesion and adhesives technology an introduction. Hanser, München (2012)
Crafer, R.C., Oakley, P.J.: Laser processing in manufacturing. Springer, Dordrecht (1993)
Rytlewski, P., Żenkiewicz, M.: Applications of lasers in metallization of thermoplastic and thermosetting polymers. J Achiev Mater Manuf Eng 57(2), 59–67 (2013)
Serafetinides, A.A., Spyratou, E., Makropoulou, M.: Laser ablation and high precision patterning of biomaterials and intraocular lenses, S. 77470V (2010)
Lagiou, D.P., Evangelatos, C., Apostolopoulos, A., Spyratou, E., Bacharis, C., Makropoulou, M., Serafetinides, A.A.: UV laser ablation patterns in intraocular lenses, S. 877017 (2013)
Meinertz, J., Fricke-Begemann, T., Ihlemann, J.: Micron and sub-micron gratings on glass by UV laser ablation. Phys Procedia 41, 708–712 (2013)
Andrew, J.E., Dyer, P.E., Forster, D., Key, P.H.: Direct etching of polymeric materials using a XeCl laser. Appl Phys Lett 43(8), 717 (1983)
Srinivasan, R., Braren, B.: Ultraviolet laser ablation and etching of polymethyl methacrylate sensitized with an organic dopant. Appl Phys A Solids Surfaces 45(4), 289–292 (1988)
Srinivasan, R., Braren, B., Casey, K.G.: Ultraviolet laser ablation and decomposition of organic materials. Pure Appl Chem 62(8), 1581–1584 (1990)
Kawamura, Y., Toyoda, K., Namba, S.: Effective deep ultraviolet photoetching of polymethyl methacrylate by an excimer laser. Appl Phys Lett 40(5), 374 (1982)
Srinivasan, R.: Self-developing photoetching of poly(ethylene terephthalate) films by far-ultraviolet excimer laser radiation. Appl Phys Lett 41(6), 576 (1982)
Owens, D.K., Wendt, R.C.: Estimation of the surface free energy of polymers. J Appl Polym Sci 13(8), 1741–1747 (1969)
Kaelble, D.H.: Dispersion-polar surface tension properties of organic solids. J Adhes 2(2), 66–81 (1970)
Rabel, W.: Einige Aspekte der Benetzungstheorie und ihre Anwendung auf die Untersuchung und Veränderung der Oberflächeneigenschaften von Polymeren. Farbe Lack 77(10), 997–1005 (1971)
Berger, E.J.: A method of determining the surface acidity of polymeric and metallic materials and its application to lap shear adhesion. J Adhes Sci Technol 4(1), 373–391 (1990)
Kraus, E., Orf, L., Baudrit, B., Heidemeyer, P., Bastian, M., Bonenberger, R., Starostina, I., Stoyanov, O.: Analysis of the low-pressure plasma pretreated polymer surface in terms of acid–base approach. Appl Surf Sci 371, 365–375 (2016)
Kraus, E., Baudrit, B., Heidemeyer, P., Bastian, M., Nguen, D.A., Starostina, I., Stoyanov, O.: Perspektiven der Säure-Base-Methode zur Untersuchung der Oberflächeneigenschaften von Polymeren. Chem Ing Tech 87(10), 1334–1341 (2015)
Kraus, E., Baudrit, B., Heidemeyer, P., Bastian, M., Stoyanov, O.V., Starostina, I.A.: Limits and possibilities in destructive testing of bonded polymer connections. Polym Res J 9(3), 337–342 (2015)
Bénard, Q., Fois, M.: Adhesion – current research and application. Wiley-VCH, Weinheim (2005)
Buchman, A., Dodiuk, H., Rotel, M., Zahavi, J.: Polymer surfaces and interfaces. VSP, , S. 37–69 (1997)
Fischer, F., Romoli, L., Kling, R.: Laser-based repair of carbon fiber reinforced plastics. CIRP Ann Manuf Technol 59(2), 203–206 (2010)
Silvain, J.-F., Niino, H., Ono, S., Nakaoka, S., Yabe, A.: Appl Surf Sci 141(1–2), 25–34 (1999)
Büchter, E.: mo 64, 14–15 (2008)
Hartwig, A., Hunnekuhl, J., Vitr, G., Dieckhoff, S., Vohwinkel, F., Hennemann, O.-D.: J Appl Polym Sci 64(6), 1091–1096 (1997)
Feng, Y., Liu, Z.Q., Yi, X.S.: Appl Surf Sci 156(1–4), 177–182 (2000)
Hartwig, A., Schäfer, H., Wissenbach, K., Dietz, C., Vitr, G.: BMBF Abschlussbericht 13N6042 (1996)
Dyer, P.E.: Appl Phys A 77, 167–173 (2003)
Habenicht, G.: Kleben Grundlagen, Technologien, Anwendungen, 5. Aufl. Springer, Berlin (2006)
Sato, H., Nishio, S.: J Photochem Photobiol C 2(2), 139–152 (2001)
Lawrence, J., Li, L.: Mater Sci Eng A 303(1–2), 142–149 (2001)
Fischer, F., Kreling, S., Jäschke, P., Frauenhofer, M., Kracht, D., Dilger, K.: Laser surface pre-treatment of CFRP for adhesive bonding in consideration of the absorption behaviour. J Adhes 88, 350–363 (2012)
Kreling, S., Fischer, F., Frauenhofer, M., Dilger, K.: Klebvorbehandlung von Faserverbundkunststoffen mit duroplastischer Matrix mittels Laserstrahlung. In: Verbundwerkstoffe und Werkstoffverbunde 18. Symposium Verbundwerkstoffe und Werkstoffverbunde, Chemnitz, 30. März bis 1. April. Bd. 41. (2011). Bernhard Wielage; Fakultät für Maschinenbau TU Chemnitz
Walters, C.T., Smith, J.A.: Laser Pretreatment Of Surfaces For Adhesive Bonding. 39th ISTC, Cincinnati, OH (2007)
Jansen, I., Böhme, R.: Schweißen Schneid 58(5), 247–249 (2006)
Büchter, E., Kreling, S., Fischer, F., Dilger, K.: Application of solid state laser for the pre-treatment of CFRP: reliable bonding using mobile laser technology. Adhesion Adhes Sealants 3, 34–39 (2012)
Büchter, E., Kreling, S., Fischer, F., Dilger, K.: Festkörperlaser zur Vorbehandlung von CFK-Klebflächen: Sicher kleben mit mobiler Lasertechnik. Adhäsion Kleb Dicht 56(5), 35–39 (2012)
Fischer, F., Kreling, S., Dilger, K.: Surface structuring of CFRP by using modern excimer laser sources. Phys Procedia 39, 154–160 (2012)
Kreling, S., Fischer, F., Delmdahl, R., Gäbler, F., Dilger, K.: Analytical characterization of CFRP laser treated by excimer laser radiation. Lasers in Manufacturing Conference 2013, München, 13.–16. Mai. Wissenschaftliche Gesellschaft Lasertechnik e. V., Physics Procedia 41, 282–290 (2013)
Fischer, F., Kreling, S., et al.: Using excimer lasers to clean CFRP prior to adhesive bonding. Reinf Plast 57(5), 43–46 (2013)
Rotel, M., Zahavi, J., Buchman, A., Dodiuk, H., Adhes, J.: The Journal of Adhesion 55(1–2), 77–97 (1995)
Hartwig, A., Vitr, G., Dieckhoff, S., Hennemann, O.-D.: Angew Makromol Chem 238(4187), 177–189 (1996)
Blass, D., Kreling, S., Dilger, K.: Comparison of UV-tp M-IR laser for surface pre-treatment based on the ILSS-test. Tagungsunterlagen WLT, Lasers in Manufacturing Conference, München, 22.–25. Juni 2015 (2015)
Fischer, F., Kreling, S., Dilger, K.: Laser surface pre-treatment of carbon fiber-reinforced plastics (CFRPs) for adhesive bonding. In: Mittal, K.L., Bahners, T. (Hrsg.) Laser surface modification and adhesion, S. 103–135 (2014)
Fischer, F., Kreling, S., Blass, D., Stähr, R., Blümel, S., Jäschke, P., Dilger, K.: Laser material machining of CFRP – An option for damage-free and flexible CFRP processing? In: Machinability of fiber-reinforced plastics, S. 1–29. de Gruyter, Berlin Boston (2015)
Kreling, S.: „Laserstrahlung mit unterschiedlicher Wellenlänge zur Klebvorbehandlung von CFK“ Forschungsberichte des Instituts für Füge- und Schweißtechnik, Bd. 38, ISBN 978-3-8440-3768-5 (2015)
Kreling, Grefe, Dilger: Surface treatment with small laser spots: an approach for the comparison of process parameters. SPIE Photonics West, 13.–14. Febr. (2016)
Blass, et al.: CFRP bonding pre-treatment with laser radiation of 3 µm wavelength: laser/material interaction. SPIE Photonics West (2016)
Fischer, F., Kreling, S., Jäschke, P., Frauenhofer, M., Kracht, D., Dilger, K.: Laser surface pre-treatment of CFRP for adhesive bonding in consideration of the absorption behaviour. J Adhes 88, 350–363 (2012)
Kreling, S., Fischer, F., Delmdahl, R., Gäbler, F., Dilger, K.: Analytical characterization of CFRP laser treated by excimer laser radiation. Lasers in Manufacturing Conference 2013, München, 13.–16. Mai. Wissenschaftliche Gesellschaft Lasertechnik e. V., Physics Procedia 41, 282–290 (2013)
Kreling, S., Grefe, H., Dilger, K.: Surface treatment with small laser spots: an approach for the comparison of process parameters. SPIE Photonics West (2016)
Blass, D., Fischer, F., Dilger, K.: Vakuumsaugstrahlen als Klebvorbehandlung von (faserverstärkten) Kunststoffen. In: (Hrsg.) DVS-Berichte 2016 5. Doktorandenseminar Klebtechnik, Vorträge der gleichnamigen Veranstaltung, Aachen, 22.–23. Sept 2014. Bd. 313, S. 13–19 (2016)
Kreling, S., Blass, D., Fischer, F., Dilger, K.: Sauber und prozesssicher – Klebvorbehandlung von FVK durch Unterdruckstrahlen. Adhäsion Kleb Dicht 57(3), 24–29 (2013)
Poorna Chander, K., Vashista, M., Sabiruddin, K., Paul, S., Bandyopadhyay, P.P.: Effects of grit blasting on surface properties of steel substrates. Mater Des 30, 2895–2902 (2009)
Boerio, F.J., Roby, B., Dillingham, R.G., Bossi, R.H., Crane, R.L.: Effect of grit-blasting on the surface energy of graphite/epoxy composites. J Adhes 82, 19–37 (2006)
Chin, J.W., Wightman, J.P.: Surface characterization and adhesive bonding of toughened bismaleimide composites. Compos Part A: Appl Sci Manuf 27, 419–428 (1996)
Brockmann, W.: Adhesive bonding of Polypropylene in Polypropylene – An A–Z reference. Springer, Berlin, Heidelberg (1999). ISBN 978-9401058995
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Fachmedien Wiesbaden GmbH
About this chapter
Cite this chapter
Wilken, R. et al. (2018). Vorbehandlung von Kunststoffen. In: Doobe, M. (eds) Kunststoffe erfolgreich kleben. Springer Vieweg, Wiesbaden. https://doi.org/10.1007/978-3-658-18445-2_2
Download citation
DOI: https://doi.org/10.1007/978-3-658-18445-2_2
Published:
Publisher Name: Springer Vieweg, Wiesbaden
Print ISBN: 978-3-658-18444-5
Online ISBN: 978-3-658-18445-2
eBook Packages: Computer Science and Engineering (German Language)