Skip to main content
SpringerLink
Log in

Impact of Recent Computer Technology on Systems Control

Auswirkungen Jüngster Entwicklungen der Rechnertechnologie auf die Leittechnik

  • Conference paper
Book cover Fortschritte in der Meß- und Automatisierungstechnik durch Informationstechnik

Part of the book series: Fachberichte Messen · Steuern · Regeln ((FACHBERICHTE,volume 14))

  • 202 Accesses

Zusammenfassung

Dieser Bericht skizziert ein Bild laufender Entwicklungen der Rechnertechnik und verwandter Technologien und untersucht deren Auswirkungen auf die Leittechnik. Zunächst wird gezeigt, wie sich die Anwendung von Rechnern in der Automatisierung von kontinuierlichen hin zu diskreten Prozessen entwickelt hat.

Gerade bei der letztgenannten Anwendungsklasse gehört eine Vielzahl neuartiger CA-Techniken zum festen Bestandteil von Leitsystemen, sowohl in der Operationsphase als auch in der Entwurfs- und Testphase.

Eine kurze Übersicht über jüngste Entwicklungen auf dem Gebiet der Hard- und Software von Rechnern schließt sich an. An ausgewählten Beispielen aus der Leittechnik wird die Anwendung dieser modernen Rechnertechnologien diskutiert. Dabei wird besonders auf die Rolle der digitalen Signalverarbeitung bei Bildverarbeitung und Maschinendiagnose sowie auf die Bedeutung wissensbasierter Ingenieurmethodiken eingegangen.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 44.99
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 59.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Japan Electronics Industry Development Association: Trend of Recent Industrial Computers, JEIDA Report No. 59-A-217, May, 1984.

    Google Scholar 

  2. S.B. Stanley, et al: “A Control Perspective on Recent Trends in Manufacturing Systems”, IEEE Control Systems Magazine, Vol. 6, No. 2, 1986, pp. 3–15.

    Article  Google Scholar 

  3. Special Issue on Pattern Measurements in Process Control, KEISOU, Vol. 24, No. 12, 1981, pp. 6–50.

    Google Scholar 

  4. Special Issue on Image Process Technology for Factory Automation, The Hitachi Hyouron, Vol. 67, No. 9, 1985, pp. 1–85.

    Google Scholar 

  5. Workstations, Computrol, No. 14, 1986.

    Google Scholar 

  6. VLSI and Computers, Computrol, No. 1, 1983.

    Google Scholar 

  7. Special Issue on Factory Automation, Fuji Electric Journal, Vol. 58, No. 9, 85.

    Google Scholar 

  8. Special Issue on Applications of General-Purpose Microprocessors, Fuji Electric Journal, Vol. 56, No. 7, 1983.

    Google Scholar 

  9. Special Issue on Artificial Intelligence, Nikkei Computers, March 3, 1985.

    Google Scholar 

  10. Special Issue on FA Computers, Factory Automation, Vol. 2, No. 12, 1984, pp 19–85

    Google Scholar 

  11. Special Issue on Factory Automation, Yasukawa Denki, Vol. 48, No. 4, pp. 243–285.

    Google Scholar 

  12. Special Issue on Industrial Robots, Mitsubishi Denki Gihou, Vol. 59, No. 10, 1985, pp. 1–34.

    Google Scholar 

  13. Special Issue on Application of Microprocessors, J. of IEE of Japan, Vol. 103, No. 5, 19863, pp. 391–474.

    Google Scholar 

  14. K.A. El-Ayat, et al: “The Intel 80386 — Architecture and Implementation”, IEEE Micro, Vol. 5, No. 6, 1985, pp. 4–22.

    Article  Google Scholar 

  15. Special Issue on Factory Automation, Journal of the Society of Instrumentation and Control Engineers of Japan, Vol. 22, No. 11, 1983, pp. 77.

    Google Scholar 

  16. S. Narita: “Computer and Communication Technology for Factory Automation”, J. of SICE of Japan, Vol. 22, No. 11, 1983, pp. 937–940.

    Google Scholar 

  17. S. Narita: “Minicomputers for Factory Automation, Present and Future”, Factory Automation, Vol. 2, No. 12, 1984, pp. 1–5.

    MathSciNet  Google Scholar 

  18. S. Narita, Editor, “Computer Integrated Manufacturing”, Computrol, No. 11, 1985.

    Google Scholar 

  19. Special Issue on Ultrahigh Speed Computing, Journal of SICE of Japan, Vol. 24, No. 8, 1985, pp. 683–723.

    Google Scholar 

  20. Special Issue on Productivity of Software Development, The Journal of IEE of Japan, Vol. 106, No. 1, 1986, pp. 5–26.

    Google Scholar 

  21. Special Issue on Knowledge Engineering and Its Industrial Applications, Hitachi Hyouron, Vol. 67, No. 12, 1985, pp. 1–58.

    Google Scholar 

  22. T. Sumi, Et al: “Industrial Automation and Microcomputers”, Asakura Shoten,83.

    Google Scholar 

  23. H. Kasahara: “Multiprocessor Scheduling Algorithms and Their Practical Applications”, Doctoral Dissertation, Waseda University, March 1985.

    Google Scholar 

  24. H. Kasahara and S. Narita: “Practical Multiprocessor Scheduling Algorithms for Efficient Parallel Processing”, IEEE Trans, on Computers, Vol.C-33, Nr. 11, 1985.

    Google Scholar 

  25. H. Kasahara and S. Narita: “Parallel Processing of Robot Arm Control Computation on a Multimicroprocessor System”, IEEE Journal of Robotics and Automation, Vol. 1, No. 2, 1985.

    Google Scholar 

  26. Special Issue on Systems Technology, Toshiba Rev. Vol.40, No.5, 85, pp 391–417.

    Google Scholar 

  27. Special Issue on Image Processing, Toshiba Rev. Vol.40, No.8, 85, pp 655–682.

    Google Scholar 

  28. Special Issue on Software Development, Toshiba Review, Vol. 38, No. 11, 1983, pp 951–983.

    Google Scholar 

  29. K. Akizuki: “Machine Diagnosis and Safety”, J. of SICE of Japan, Vol. 24, No. 4, 1985, pp 301–306.

    Google Scholar 

  30. Special Issue on “Wabot-2”, Bulletin of Science and Engineering Research Laboratory, Waseda University, Vol.112, 1985, pp 1–80.

    Google Scholar 

  31. Special Issue on Speech Recognition and Synthesis, Journal of Robotics Society of Japan, Vol.2, No.1, 1984, pp 3–47.

    Google Scholar 

  32. K.J. Astrom: “Process Control — Past, Present and Future”, IEEE Control Systems Magazine, Vol. 5, No. 3, 1985, pp 3–10.

    Article  Google Scholar 

  33. H. Kasahara and S. Narita: “An Approach to Supercomputing Using Multiprocessor Scheduling Algorithms”, Proceedings of the First International Conference on Supercomputing Systems, December, 1985.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Electrical Engineering, Waseda University, Tokyo 160, Japan

    S. Narita

Authors
  1. S. Narita
    View author publications

    You can also search for this author in PubMed Google Scholar

Editor information

Editors and Affiliations

  1. Institut für Regelungstechnik, Universität Hannover, Appelstraße 11, 3000, Hannover 1, Deutschland

    Manfred Thoma

  2. Lehrstuhl für Steuerungs- und Regelungstechnik, Technische Universität München, Arcisstraße 21, 8000, München 2, Deutschland

    Günther Schmidt

Rights and permissions

Reprints and permissions

Copyright information

© 1986 Springer-Verlag Berlin, Heidelberg

About this paper

Cite this paper

Narita, S. (1986). Impact of Recent Computer Technology on Systems Control. In: Thoma, M., Schmidt, G. (eds) Fortschritte in der Meß- und Automatisierungstechnik durch Informationstechnik. Fachberichte Messen · Steuern · Regeln, vol 14. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-95506-8_2

Download citation

  • DOI: https://doi.org/10.1007/978-3-642-95506-8_2

  • Publisher Name: Springer, Berlin, Heidelberg

  • Print ISBN: 978-3-540-17033-4

  • Online ISBN: 978-3-642-95506-8

  • eBook Packages: Springer Book Archive

Publish with us

Policies and ethics

Search

Navigation