Advertisement

Adhesion and Adhesives for Wood

  • Franz F. P. Kollmann
  • Edward W. Kuenzi
  • Alfred J. Stamm

Abstract

Adhesion, adhesives and adherents are elements of a general adhesion technology which is of great importance to many fields of engineering, including the gluing of wood. Glue joints play and important role in economical woodworking since they allow the improvement of blockboards and of lowgrade plywood cores by veneering, the manufacture of rather complicated constructions, the production of plywood and laminated board, beams and arches, the utilization of smaller wood sections and the binding in particleboards, Practically no wood based material — except densified solid wood and flexible wood — is manufactured without gluing of sheets or particles.

Keywords

Joint Strength Resin Adhesive Glue Line Melamine Resin Animal Glue 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature Cited

  1. American Specification MIL-A-397 B(1953) Adhesive: Room temperature and intermediate temperature setting resin (phenol, resorcinol and melamine base).Google Scholar
  2. Anonymous, (1943) Penetration and Starvation. Aero Res. Techn. Notes, Bull. No. 7, Duxford, Cambridge.Google Scholar
  3. Armonas, J. E., (1970) Gel permeation chromatography and its use in the development of resins. For. Prod. J. 20: 22–28.Google Scholar
  4. Baekeland, L. H., (1909, 1913 ) USP 939966, 942699, 942700 and 942809, Ind. Eng. Chem. 1: 149, 5: 506.Google Scholar
  5. Baekeland, L. H., (1910) Condensation products of phenol and formaldehyde. USP 942809.Google Scholar
  6. Baekeland, L. H., (1910) Condensation products of phenol and formaldehyde. USP 942700.Google Scholar
  7. Baekeland, L. H., (1910) Insoluble product of phenol and formaldehyde. USP 942699.Google Scholar
  8. Baekeland, L. H., (1910) Molded condensation products of formaldehyde and phenol. USP 939966.Google Scholar
  9. Baekeland, L. H., Thurlow, N., (1912) Wood finished with veneer attached by and coated with phenol-formaldehyde condensation product. USP 1019408.Google Scholar
  10. Baeyer, A., (1872) Über die Verbindung der Aldehyde mit den Phenolen. Ber. d. Dt. Chem. Gesellsch. 5: 289–282.Google Scholar
  11. Barnes, D., (1970) Glue spreading efficiency of roll spreaders. For. Prod. J. 20: 24–29.Google Scholar
  12. Baumann, H., (1967) Leime and Kontaktkleber. Springer-Verlag, Berlin, Heidelberg, New York.Google Scholar
  13. Bayer, O., (1937) Verfahren zur Herstellung von Polyurethanen, bzw. Polyharnstoffen. DRP 728 981.Google Scholar
  14. Bikerman, J. J., (1941) Strength and thinness of adhesive joints. J. Soc. Chem. Ind. 60: 23–24.CrossRefGoogle Scholar
  15. Bikerman, J. J., (1947) The fundamentals of tackiness and adhesion. J. Colloid Sci. 2: 163–175.CrossRefGoogle Scholar
  16. Bikerman, J. J., (1961) The science of adhesive joints. Academic Press, New York.Google Scholar
  17. Bikerman, J. J., Huang, C.-R., (1959) Polyethylene adhesive joints. Trans. Soc. Rheol. 3: 5–12.CrossRefGoogle Scholar
  18. Black, J. M., (1943) The effect of fire retardant chemicals on glues used in plywood manufacture. U. S. For. Prod. Lab. Rep. No R 1427, Madison/Wise.Google Scholar
  19. Blankenstein, C., (1937) Leimen von Holz. AWF-Schrift No 164, Leipzig, Berlin.Google Scholar
  20. Blomquist, R. F., (1963) Adhesive-Past, Present and Future. U. S. For. Prod. Lab., Madison/Wise. BP 347242 ( 1929 ) Th. Goldschmit AG.Google Scholar
  21. BP 435041 (1933) I. G. Farbenindustrie AG.Google Scholar
  22. Brouse, D., (1938) Serviceability of glue joints. Mech. Eng. 60: 306–308.Google Scholar
  23. Browne, F. L., (1931) Adhesion in the painting and in the gluing of wood. Ind. Engng. Chem. 23: 290–294.CrossRefGoogle Scholar
  24. Browne, F. L., Brouse, D., (1929) Nature of adhesion between glue and wood. Ind. Engng. Chem. 21: 80–84.CrossRefGoogle Scholar
  25. Browne, F. L., Brouse, D., (1939) Casein glue. In: Sutermeister, E., Browne, F. L., Casein and its industrial application. A. C. S. Monograph No 30, p. 247–253. Reinhold, New York.Google Scholar
  26. Browne, F. L., (1947) quoted after: Delmonte, The technology of adhesives New York, p. 260.Google Scholar
  27. Browne, F. L., Truax, T. R., (1926) The place of adhesion in the gluing wood. Colloid Symposium Monograph 4: 258–269.Google Scholar
  28. Browne, F. L., Truax, T. R., (1929) Significance of mechanical wood-joint tests for the selection of woodworking Glues. Ind. Engng. Chem. 21: 74–79.CrossRefGoogle Scholar
  29. de Bruyne, N. A., (1944) The strength of glued joints. Aircraft Engng. 16: 115–140.CrossRefGoogle Scholar
  30. de Bruyne, N. A., (1947a) The physics of adhesion. J. Scientif. Instruments, 24: 29–35.CrossRefGoogle Scholar
  31. de Bruyne, N. A., (1947b) The physics of adhesion. Aero Res. Techn. Notes No 54, Duxford, Cambridge.Google Scholar
  32. de Bruyne, N. A., (1951) Some basic ideas in structural adhesives, London.Google Scholar
  33. de Bruyne, N. A., Houwink, R., (1951) Adhesion and adhesives. Elsevier Publ. Comp., New York, Amsterdam, London, Brussels, p. 18.Google Scholar
  34. Buttermann, S., Cooperider, C. K., (1923) Process of manufacturing waterproof adhesives. U.P 1456842. U. S. Pat. Office Gaz. 310: 1129.Google Scholar
  35. Canadian Standard Association, Can. Standard 0112–7–1960 (1960) Phenol and resorcinol resin adhesives for wood (room and intermediate temperature curing).Google Scholar
  36. Carroll, M. N., Bergin, E. G., (1967) Catalyzed PVA emulsions as wood adhesives. For. Prod. J. 17: 45–50.Google Scholar
  37. Carswell, T. S., (1947) Phenoplasts: Their structure, properties and chemical technology. Interscience, New York.Google Scholar
  38. Chapman, F., (1951) Synthetic resin adhesives. In: de Bruyne, Houwink. Adhesion and adhesives, p. 224–226. Elsevier Publ. Comp., New York, Amsterdam, London, Brussels.Google Scholar
  39. Chen, Ch.-M., (1970) Effect of extractive removal on adhesion and wettability. For. Prod. J. 20: 36–40.Google Scholar
  40. Chow, S.-Z, Hancock, W. V. (1969) Method for determining degree of cure of phenolic resin. For. Prod. J. 19: 21–29.Google Scholar
  41. Chow, S.-Z, Mukai, H. N., (1969) An infrared method for determining phenol-formaldehyde resin content in fiber and wood products. For. Prod. J. 19: 57–60.Google Scholar
  42. Chow, S.-Z, Troughton, G. E., (1969) Determination of melamine-formaldehyde content in wood and cellulose products by infrared spectrometry. For. Prod. J. 19: 24–26.Google Scholar
  43. Chugg, IV. A., Gray, V. R., (1960) The durability of acid-setting phenolic resin adhesives. Timber Developm. Assoc. Ltd., London, Inform. Bull. 5.Google Scholar
  44. Ciba AG (without date) Unpublished work.Google Scholar
  45. Ciba AG (1938) DRP 718342. Melaminharz.Google Scholar
  46. Ciba AG (1939b) DRP 726855 (FP 863284). Reinigen von Melaminharz.Google Scholar
  47. Clark, L. E. Jr., (1968) Measurement of “speed of set” of room temperature setting wood adhesives. For. Prod. J. 15: 52–53.Google Scholar
  48. Delmonte, J., (1947) The technology of adhesives. Reinhold Publ. Comp., New York, p. 325, 326, 349.Google Scholar
  49. Deppe, H.-J., Ernst, K., (1971) Isocyanate als Spanplattenbindemittel. Holz als Roh-and Werkstoff 29 (2): 45–50.CrossRefGoogle Scholar
  50. Dibuz, J. J., Shelton, F. J., (1967) Glueline identification. For. Prod. J. 17: 20–22.Google Scholar
  51. Dietz, A. G. H., (1949) Engineering laminates. New York, London, p. 104.Google Scholar
  52. DRP 550647 (1929) I. G. Farbenindustrie AG.Google Scholar
  53. DRP 647303 (BP 455008) (1935) Henkel, Harzartige Kondensationsprodukte.Google Scholar
  54. DRP 680707 (FP 817539, USP 2 211 709, USP 2211710) (1936) 1. G. Farbenindustrie, Harzartige Kondensationsprodukte.Google Scholar
  55. DRP 702890 (Swiss Pat. 202245) (1939) Ciba AG, Melamin.Google Scholar
  56. DRP 718342 (1938) Ciba AG. Melaminharz.Google Scholar
  57. DRP 721240 (1942) Henkel, Kaltverleimung.Google Scholar
  58. DRP 726855 (FP 963284) (1939) Ciba AG., Reinigen von Melaminharz.Google Scholar
  59. DRP 728981 (1937) Bayer, O., Verfahren zur Herstellung von Polyurethanen, bzw. Polyharnstoffen.Google Scholar
  60. Eickner, H. A., Blorn.quist, R. F., (1951) Adhesives for bonding wood to metal. U. S. For. Prod. Lab. Rep. No II 1768, Madison/Wise.Google Scholar
  61. Ellis, C., (1935) Chemistry of synthetic resins. Vol. I. Reinhold Publ. Corp., New York.Google Scholar
  62. Enzensberger, W., (1952) Probleme der Furnierfugenverleimung. Holz-Zbl., 78: 1137.Google Scholar
  63. Farrow, C. A., Hawley, D. H., Smith, E. A., (1946) Phenolic resin glue line as found in yellow birch plywood. Ind. Eng. Chem. Anal. Ed. 18: 307–310.Google Scholar
  64. Fischer, C., Bensend, D. IV., (1969) Gluing of southern pine veneer with blood modified phenolic resin glues. For. Prod. J. 19: 32–37.Google Scholar
  65. Freeman, H. G., Kreibich, R. E., (1968) Measurement of glue line viscosity. For. Prod. J. 18: 15–17.Google Scholar
  66. Frey, K., (1947) Über die Eigenschaften and die Anwendung von Melocol. Schweiz. Arch. f. Angew. Wiss. u. Techn. 13: 83–93.Google Scholar
  67. Gerngross, O., (1930) Über Sperrholzleime. Deutsche Versuchsanst. f. Luftfahrt e. V., BerlinAdlershof, Rep. No. 192. DVL-Jahrbuch, p. 428–433.Google Scholar
  68. Gerngross, O., (1949) Glue and gelatine. A paper for the Congress of the New International Association for Testing Materials. Ztschr. f. Angew. Chem. 42: 968–972.CrossRefGoogle Scholar
  69. Gibbs, J. W., (1876/1877) On the equilibrium of heterogeneous substances. Trans. Connecticut Acad. 3 (1876): 103–243; (1877): 343–524.Google Scholar
  70. Goland, N., Reissner, E., (1944) The stresses in cemented joints. J. Appl. Mech. 11: A17 - A27.Google Scholar
  71. Goldschmidt, C., (1896) Über die Einwirkung von Formaldehyd auf Harnstoff. Ber. d. Dt. Gesellsch. 29: 2438 /2439.Google Scholar
  72. Goldschmidt, C., (1897) Über die Einwirkung von Formaldehyd auf Harnstoff. Chem. Ztg. 46: 460.Google Scholar
  73. Goldschmidt, C., (1898) Action of formaldehyde on carbamide. J. of the Chem. Society 74: 178–180 (Abstract).Google Scholar
  74. Goldschmidt AG, (1929) BP 347–242.Google Scholar
  75. Guiher, J. K., (1970) Methylphenol-formaldehyde resin as an adhesive for wood. For. Prod. J. 20: 21–23.Google Scholar
  76. Gumprecht, D. L., (1969) “Tailoring” phenolic adhesives. For. Prod. J. 19: 38–40.Google Scholar
  77. Hahn, K. F., (1959, 1961) Symposium on adhesion and adhesives 1959. ASTM Spec. Tech. Publ. No 271.Google Scholar
  78. Halligan, A. F., (1969) Recent glues and gluing research applied to particleboard. For. Prod. J. 19: 44–51.Google Scholar
  79. Henkel (1935) DRP 647303 (BP 455008). Harzartige Kondensationsprodukte.Google Scholar
  80. Henkel (1942) DRP 721240. Kaltverleimung.Google Scholar
  81. Hoekstra, J., Fritzius, C. P., (1951) Rheology of adhesives. In: de Bruyne, N. A., Houwink, R., Adhesion and adhesives, p. 79. New York, Amsterdam, London, Brussels: Elsevier Publ. Comp.Google Scholar
  82. Holzer, K., (1962a) Leime für die Herstellung von Lagenholz. In: Kollmann, F., Furniere, Lagenhölzer und Tischlerplatten. Springer-Verlag, Berlin, Göttingen, Heidelberg, p. 285 to 355.Google Scholar
  83. Holzer, K., (1962b) Harnstoff-Formaldehyd-Harzleime. In: Kollmann, F., Furnier, Lagenhölzer und Tischlerplatten. Springer-Verlag, Berlin, Göttingen, Heidelberg, p. 316–332.Google Scholar
  84. Holz-Zentralblatt-Verlag (1958) Holz und Kunststoffe. Holzwirtschaftl. Jahrbuch No. 8, Stuttgart.Google Scholar
  85. Houwink, R., Salomon, G., (1965) Adhesion and adhesives, Vol. I: Adhesives. Elsevier Publ. Comp., Amsterdam, London, New York.Google Scholar
  86. Ilse, Chung Y., (1968) Gluability of southern pine earlywood and latewood. For. Prod. J., 18: 32–36.Google Scholar
  87. Hultzsch, K. (1940) Chemie der Phenolharze. Springer-Verlag, Berlin, Göttingen, Heidelberg. I. G. Farbenindustrie A. G. (1929) DRP 550647.Google Scholar
  88. I. G. Farbenindustrie A. G. (1933) BP 435041.Google Scholar
  89. Jarvi, R. A. (1967) Exterior glues for plywood. For. Prod. J., 17: 37–42.Google Scholar
  90. John, J., (1920) USP 1355834.Google Scholar
  91. Johnson, J. W., (1970) Flexural tests of large glue-laminated beams made of nondestructively tested lumber. For. Prod. J. 20: 20.Google Scholar
  92. Jones, W. L., (1927) Some data on glues from raw starch. Wood Working Industries, Milwaukee, 3: 21–27.Google Scholar
  93. Kaess, F., Vogel, E., (1954) Herstellung und Verwendung von Melamin. Chem. Ind. Techn., 26: 380–382.CrossRefGoogle Scholar
  94. Kirby, K. W., (1965) Vegetable adhesives. In: Houwink, R., Salomon, G., Adhesion and adhesives. Vol. I: Adhesives. Elsevier Publ. Comp., Amsterdam, London, New York, p. 167–185.Google Scholar
  95. Kitazawa, G., (1946) A study of adhesion in the glue lines of twenty-two woods of the U. S. N. Y. State College of Forestry, Syracuse, Techn. Bull. No. 66.Google Scholar
  96. Klemm, H., (1938) Neue Leimuntersuchungen mit besonderer Berücksichtigung der Kaltkunstharzleime, München.Google Scholar
  97. Knight, R. A. G., (1946) Requirements and properties of adhesives for wood. For. Prod. Res. Bull. No. 20. His Majesty’s Stationery Office, London.Google Scholar
  98. Knight, R. A. G., (1952) Adhesives for wood. Chapman & Hall, London.Google Scholar
  99. Knight, R. A. G., (1959) The efficiency of adhesives for wood. For. Prod. Bull. No. 38, 2nd Ed., p. 21. Her Majesty’s Stationery Office, London.Google Scholar
  100. Knight, R. A. G., Newall, R. J., (1957) Investigations into glues and gluing. For. Prod. Res. Lab. Rept. No. 107. Her Majesty’s Stationery Office, London.Google Scholar
  101. Koch, P., (1967) Minimizing and predicting delamination of southern plywood in exterior exposure. For. Prod. J., 17: 41–47.Google Scholar
  102. Koch, H., Sachsenberg, E., (1932) Untersuchungen über die Biegefestigkeit kaltgeleimter Hölzer. Sperrholz, 4: 89–91.Google Scholar
  103. Köhler, R., (1941) Kondensationskunststoffe aus Melamin und Formaldehyd. Kunststofftechnik, 11: 1–4.Google Scholar
  104. Köhler, R., (1943) Über einige Versuche zur Härtung von Melamin-Formaldehyd-Kondensationsprodukten. Koll.-Z., 103: 138–144.CrossRefGoogle Scholar
  105. König, H. J., (1958) Herstellung, Prüfung und Eigenschaften melaminharz-vergüteter Schichtstoffe für dekorative Verwendung. Kunststoffe, 48: 513–522.Google Scholar
  106. Kollmann, F., (1955) Technologie des Holzes und der Holzwerkstoffe. 2nd Ed., Vol. 2. Springer-Verlag, Berlin, Göttingen, Heidelberg.Google Scholar
  107. Kollmann, F., Teichgräber, R., (1961) Beitrag zur Prüfung der Brandeigenschaften, insbesondere der Schwerentflammbarkeit, von Platten aus Holz und Holzwerkstoffen. Holz als Roh-und Werkstoff 19: 173–186.CrossRefGoogle Scholar
  108. Kraemer, O., (1932) Fragen der Holzleimung. Z. VDI., 76: 443.Google Scholar
  109. Kragh, A. M., Wootton, J., (1965) Animal glue and related protein adhesives. In: Houwink, R., Salomon, G., Adhesion and adhesives, Vol. I: Adhesives., p. 141–165. Elsevier Publ. Comp., Amsterdam, London, New York.Google Scholar
  110. Kreibich, R. E., Freeman, H. G., (1968) Development and design of an accelerated boil machine. For. Prod. J., 18: 24–26.Google Scholar
  111. Kreibich, R. E., Freeman, H. G., (1970) Effect of specimen stressing durability of eight wood adhesives. For. Prod. J., 20: 44–49.Google Scholar
  112. Laucks, I. F., Davidson, G., (1923) Vegetable glue and method of making same. USP 1689732.Google Scholar
  113. Kreibich, R. E., Freeman, H. G., (1939) Glue and method of making. USP 150175.Google Scholar
  114. Lindauer, A. C., (1923) Blood albumin glue. USP 1459541.Google Scholar
  115. Little, G. E., Pepper, K. W., (1947) The influence of pH on the setting time of phenolic resins. XIth Intern. Congr. Pure and Appl. Chem., London.Google Scholar
  116. Marian, J. E., (1953) Trä och plast. Aktuella problem för limnings-och yttbehandlingsforskning. Svenska Träforskn. Inst., Träteknik, Medd. 48 B, Stockholm.Google Scholar
  117. Marian, J. E., Fickler, H. H., (1953) Eigenschaften von Leimtypen. Holz als Roh-und Werkstoff, 11: 18–27.CrossRefGoogle Scholar
  118. Mark, H., (1943) Elasticity and strength. In: Ott, E., Cellulose and cellulose derivates. Inter-science Publ. Inc. p. 990–1043.Google Scholar
  119. Martin, R. W., (1956) The chemistry of phenolic resins, p. 298. Wiley, New York.Google Scholar
  120. Matting, A., Ulmer, K., (1963) Metallklebeverbindungen. III. Spannungs-und Dehnungsverhalten. IV. Grenzflächenreaktionen u. Spannungsverteilung. Kautschuk, Gummi, 16: 334–387.Google Scholar
  121. Maxwell, J. W. (1945) Shear strength of glue joints as affected by wood surfaces and pressures. Transactions Am. Soc. Mech. Eng. Easton, 67: 101–110.Google Scholar
  122. McBain, J. W. and coworkers, (1922) First Report of the Adhesives Research Committee, London. Dept. Sei. Ind. Res., Adhesive Res. Committee, London.Google Scholar
  123. McBain, J. W. and coworkers, (1926) Second Report of the Adhesive Research Committee, London. Dept. Sci. Ind. Res., Adhesive Res. Committee, London.Google Scholar
  124. McBain, J. W., (1932) Third Report of the Adhesive Research Committee, London. Dept. Sei. Ind. Res., Adhesive Res. Comm., London.Google Scholar
  125. McBain, J. W., Lee, W. B., (1927) Adhesives and adhesion: gums, resins and waxes between polished metal surfaces. J. Phys. Chem. 31: 1674–1680.CrossRefGoogle Scholar
  126. McClain, I. R., (1919) Wood Veneer. USP 1299747.Google Scholar
  127. McHale, W. H., (1944) Melurac — a boil-resistant, durable adhesive. Plastics, 1: 40, 11, 112.Google Scholar
  128. McNamara, W. S., Waters, D., (1970) Comparison of the rate of glue-line strength development for oak and maple. For. Prod. J. 20: 34–35.Google Scholar
  129. Mees, H., (1930) Sperrholz. Vol. 2, p. 20 and 365.Google Scholar
  130. Megson, N. J. L., (1958) Phenolic resin chemistry. Butterworths Sci. Publ., London.Google Scholar
  131. Müller, A., (1953) Kaltleime auf Phenolharzbasis und die Gefahr der Holzschädigung. Holz als Roh-und Werkstoff, 11: 429–435.CrossRefGoogle Scholar
  132. Mylonas, C., (1948) On the stress distribution in glued joints. Proc. VIIth Intern. Congr. Appl. Mech., London, 4: 137–149.Google Scholar
  133. Mylonas, C., de Bruyne, N. A., (1951) Static problems. In: de Bruyne, N. A., Houwink, R., Adhesion and adhesives. Elsevier Publ. Comp., New York, Amsterdam, London, Brussels, p. 91–105.Google Scholar
  134. Narayanamurti, D., Honda, B. K., (1954) Rheology of Adhesives, Part I. Kolloid-Z., 138: 40.CrossRefGoogle Scholar
  135. Narayanamurti, D., Pande, J. N., (1948) Durability trials on glues and plywood. Ind. For. Bull. No 139, For. Res. Inst., Dehra Dun.Google Scholar
  136. Northcott, P. L., (1964) Specific gravity influences wood bond durability. Adhesives Age 7 (10): 34–36.Google Scholar
  137. Pauling, L., Corey, R. B., Branson, H. R., (1951) The structure of proteins: Two hydrogen bonded helical configurations of the polypeptide chains. Proc. Nat. Acad. U. S. 37: 205 to 211.Google Scholar
  138. Perry, Th. D., (1948) Modern plywood. Pitman Publ. Corp., New York, London.Google Scholar
  139. Phinney, H. K., (1950) Phenol-formaldehyde and resorcinol-formaldehyde resin glues in gluing of wood. North Carolina State College, School of Forestry, Techn. Bull. No 4, p. 37.Google Scholar
  140. Plath, E., (1951) Die Holzverleimung. Wiss. Verlagsgesellschaft, Stuttgart.Google Scholar
  141. Plath, E., (1953) Studien über Phenolharzleime. I. Hitze-und Säurehärtung. Holz als Roh-und Werkstoff 11: 392–400.CrossRefGoogle Scholar
  142. Plath, E., (1954) Melaminharze in der Holzindustrie. Holztechnik. 34: 9–12.Google Scholar
  143. Poletika, N. V., (1943) Rep. W. E. 170 M 2, Res. Lab. Curtis Wright Corp. (cited according to de Bruyne, N. A., Houwink, R., 1951 ).Google Scholar
  144. Pollak, F., (1922) BP 181014. Chem. Astr. 16: 3531.Google Scholar
  145. Pollak, F., (1925, 1927 ) BP 261409. Chem. Abstr. 21: 3432.Google Scholar
  146. Rayner, C. A. A., (1965) Synthetic organic adhesives. In: Houwink, R., Salomon, G., Adhesion and adhesives. Vol. I: Adhesives, p. 209–210, 221–222, 225, 296. Elsevier Publ. Comp., Amsterdam, London, New York.Google Scholar
  147. Redfern, D. V., (1950) Gluing operations and industry trends. For. Prod. Soc., Reprint No 119.Google Scholar
  148. Reinhart, F. W., (1954) Nature of Adhesion. J. Chem. Education, 31: 128.Google Scholar
  149. Rinker, R. C., Kline, G. M., (1946) A general theory of adhesion. Symposium on Adhesives, A. S. T. M., p. 12.Google Scholar
  150. Rog, M., (1945) Die Melocol-Leime der Ciba Aktiengesellschaft, Basel. Eidgen. Materialprüfungs-und Versuchsanstalt Zürich, Bericht No 152.Google Scholar
  151. Salomon, G., (1965) Adhesives. In: Houwink, R., Salomon, G., Adhesion and adhesives. Elsevier Publ. Comp., Amsterdam, London, New York.Google Scholar
  152. Sauer, E., (1958) Chemie und Fabrikation der tierischen Leime und der Gelatine. Springer-Verlag, Berlin, Göttingen, Heidelberg.Google Scholar
  153. Scales, G. M., (1951) Extension in “Structural Adhesives”. London, p. 89.Google Scholar
  154. Seidl, R. F., (1947) Paper and plastic overlays for veneer and plywood. For. Prod. Res. Soc., Proc. 1, p. 23–32.Google Scholar
  155. Simonds, H. R., Weith, A. J., Bigelow, M. N., (1949) Handbook of Plastics. 2nd. Ed., p. 462, 663. D. van Nostrand Comp. Inc., Toronto, New York, London.Google Scholar
  156. Sneddon, J. N., (1961) The distribution of stress in adhesive joints. In: Eley, D. D., Adhesion, p. 46. Oxf. Univ. Press.Google Scholar
  157. Sodhi, J. S., (1957) On the acid corrosion of wood by gluing with phenolic resin adhesives. Holz als Roh-und Werkstoff, 15: 261–263.CrossRefGoogle Scholar
  158. Spellacy, J. R., (1953) Casein dried and condensed whey.Lithotype Process Co., San Francisco.Google Scholar
  159. Strickler, M. D., (1968) Specimen designs for accelerated tests. For. Prod. J. 18: 84–90.Google Scholar
  160. Stumbo, D. A., (1965) Historical Table. In: Houwink, R., Salomon, G., Adhesion and adhesives. Vol. I: Adhesives, p. 534–536. Elsevier Publ. Comp, Amsterdam, London, New York.Google Scholar
  161. Sutermeister, S., Brühl, E. (1932) Das Kasein. Springer-Verlag, Berlin.Google Scholar
  162. Truax, T. R. (1929) The Gluing of Wood. U. S. Dept. Agric. Bull. No 1500, p. 8, 39, 41. U. S. Gov. Printing Office, Washington.Google Scholar
  163. Truax, T. R. (1932) Development of wood adhesives and gluing technics. Transact. A. S. M. E.Google Scholar
  164. U. S. For. Products Laboratory, (1956) Summary of information on the durability of water-resistant woodworking glues. Rep. No 1530, Madison, Wisc.Google Scholar
  165. USP 150175 (1939) Laucks, I. F., Davidson, G., Glue and method of making.Google Scholar
  166. USP 939 966 (1910) Baekeland, L. H., Molded condensation products of formaldehyde and phenol.Google Scholar
  167. USP 942699 (1910) Baekeland, L. H., Insoluble product of phenol and formaldehyde. USP 942 700 (1910) Condensation products of phenol and formaldehyde.Google Scholar
  168. USP 942 809 (1910) Condensation products of phenol and formaldehyde.Google Scholar
  169. USP 1019408 (1912) Baekeland, L. H., Thurlow, N., Wood finished with veneer attached by and coated with phenol-formaldehyde condensation product.Google Scholar
  170. USP 1 299 747 (1919) McClain, I. R., Wood veneer.Google Scholar
  171. USP 1355834 (1920) John, J.Google Scholar
  172. USP 1 456 842 (1923) Butterman, S., Cooperider, C. K., Process of manufacturing waterproof adhesives.Google Scholar
  173. USP 1 459 541 (1923) Lindauer, A. C., Blood Album in Glue.Google Scholar
  174. USP 1 689 732 (1923) Loucks, I. F., Davidson, G., Vegetable glue and method of making same.Google Scholar
  175. Volkerson, O., (1938) Die Nietkraftverteilung in zugbeanspruchten Nietverbindungen und konstanten Laschenquerschnitten. Luftfahrtforschg. 15: 41–47.Google Scholar
  176. Voss, W. C., (1947) Engineering laminates. Fundamentals underlying the problems of their inhomogeneity. Edgar Marburg Lecture, A. S. T. M.Google Scholar
  177. Wake, W. C., (1961) The rheology of adhesives. In: Eley, D. D., Adhesion. Oxford University Press.Google Scholar
  178. Walter, G., Gewing, M., (1932) Zur Konstitution der künstlichen Harze. II. Die theoretischen Grundlagen und quantitativen Untersuchungen der Harnstoff-Formaldehyd-Kondensation. Kolloid-Beih. 34: 163–217.Google Scholar
  179. Wangaard, F. F., (1946) Summary of information on the durability of woodworking glues. U. S. For. Prod. Laboratory, Rep. No 1530, Madison, Wise.Google Scholar
  180. Webb, D. A., (1970) Wood laminating adhesive system for ribbon spreading. For. Prod. J. 20: 19–23.Google Scholar
  181. Westphal, W. H., (1952) Physikalisches Wörterbuch. Vol. 11, p. 700–701, Springer-Verlag, Berlin, Göttingen, Heidelberg.Google Scholar
  182. Whistler, R. L., (1959) Industrial gums. Academic Press Inc., New York.Google Scholar
  183. Williamson, R. V., Lathrop, E. C., (1949) Agricultural residue flours as extenders in phenolic resin glues for plywood. Mod. Plastics 27: 111–112, 169–174.Google Scholar
  184. Wood, A. D., (1963) Plywoods of the world. Johnston and Bacon Ltd., Edinburgh, London.Google Scholar
  185. Wood, A. D., Linn, T. G., (1950) Plywoods, their development, manufacture and application. W. and A. K. Johnston Ltd., Edinburgh, London.Google Scholar
  186. Zoller, H. F., (1920) Casein Viscosity Studies. Journ. General Physiology, 3: 635–651.CrossRefGoogle Scholar
  187. Zschokke, H., Montandon, R., (1944) Einfluß der Neigung von Schweißnähten zur Beanspruchungsrichtung auf die Zugfestigkeit. Schweiz. Archiv Angew. Wiss. Techn. 10: 137.Google Scholar

Copyright information

© Springer-Verlag, Berlin/Heidelberg 1975

Authors and Affiliations

  • Franz F. P. Kollmann
    • 1
  • Edward W. Kuenzi
    • 2
  • Alfred J. Stamm
    • 3
  1. 1.Institut für Holzforschung und HolztechnikUniversität MünchenGermany
  2. 2.U.S. Forest Products LaboratoryMadisonUSA
  3. 3.School of Forest Resources, Department of Wood and Paper ScienceNorth Carolina State UniversityRaleighUSA

Personalised recommendations