Abstract
Designing products for easier assembly is recognized as an important part of “simultaneous engineering”: the process of making products meet functional, manufacturing, quality and cost targets at the early stages of design. Considering the assembly aspects of existing and new products may lead, for example, to the use of simpler robots with fewer tools and grippers, and less costly fixtures, or indeed, to abandoning robots in favour of alternative process equipment.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Kroll, E, Lenz E, Wolberg JR. A knowledge-based solution to the design-for-assembly problem. Manuf Rev 1988; 1: 104–108
Andreasen MM, Kähler S, Lund T. Design for Assembly, IFS Publications and Springer-Verlag, 1983
Laszcz JF. Product design for robotic and automatic assembly. In: Proceedings of robots 8 conference, Detroit, MI 1984; pp 6.1–6.22
Schraft RD and Bässler R. Considerations for assembly oriented product design. In: Proceedings 5th international conference on assembly automation, Paris, 1984.
Browne J, O’Gorman P, Furgac I, Feising W, Deutschlaender A. Product design for small parts assembly. In: Rathmill K (ed) Robotic assembly, IFS Publications and Springer-Verlag, 1985
Scarr AJ. Product design for automated manufacture and assembly. Ann CIRP 1986; 35/1: 1–5
Boothroyd G, Dewhurst P. Design for assembly — a designer’s handbook. Department of Mechanical Engineering, University of Massachusetts, Amherst, 1983
Miyakawa S, Ohashi T. The Hitachi assemblability evaluation method (AEM). In: Proceedings 1st international conference on product design for assembly, Newport, Rhode Island, 1986
Behuniak J, Graves RJ, Poli C. Design/production integration — systematic approach. In: Proceedings 8th international conference on assembly automation, Copenhagen, Denmark, 1987; pp 111–122
Poli C, Fenoglio F. Designing parts for automatic assembly. Mach Des 1987; 59: 140–145
Boothroyd G. Making it simple: design for assembly. Mech Eng 1988; 110 2: 28–31
Leu MC, Weinstein MS. A case study of robotic assembly for a printer compensation device. J Manuf Syst 1988; 7: 163–170
Schepacz C, Brand A, Lacour M. Design for automation: a case study. In: Proceedings 3rd international conference on product design for manufacture and assembly, Newport, Rhode Island, 1988
Swift KG. Knowledge-based design for manufacture, Kogan Page, 1987
Jakiela MJ, Papalambros PY. A design for assembly optimal suggestion expert system. In: Proceedings 7th international conference on assembly automation, Zurich, Switzerland, 1986; pp 341–350
Hernani JT, Scarr AJ. An expert system approach to the choice of design rules for automated assembly, Proceedings 8th international conference on assembly automation, Copenhagen, Denmark, 1987; pp 129–140
Pratt MJ. Solid modeling and the interface between design and manufacture. IEEE Comput Graphics Applic 1984; 4: 52–59
Walske S. Solid models link design and manufacturing. Mach Des 1988; 60: 52–55
Dixon JR. Designing with features: building manufacturing knowledge into more intelligent CAD systems. Proceedings manufacturing international ’88, Atlanta, GA, 1988; pp 51–57
Henderson MR. Extraction of feature information from three dimensional CAD data. PhD thesis, Purdue University, 1984
Klein A. A solid groove: feature-based programming of parts. Mech Eng 1988; 110: 37–39
Wesley MA, Lozano-Pérez T, Lieberman LI, Lavin MA, Grossman DD. A geometric modeling system for automated mechanical assembly. IBM J Res Dev 1980; 24: 64–74
Lee K, Gossard DC. A hierarchical data structure for representing assemblies: part 1. Comput-Aided Des 1985; 17: 15–19
Rocheleau DN, Lee K. System for interactive assembly modelling. Comput-Aided Des 1987; 19: 65–72
Ko H, Lee K. Automatic assembling procedure generation from mating conditions. Comput-Aided Des 1987; 19: 3–10
Sudhakar M, Faruqi MA. Octree models for robotic assembly planning and manufacturing process planning. Proceedings 3rd international conference on computer-aided production engineering (CAPE), Ann Arbor, MI, 1988; pp 556–571
Shpitalni M, Elber G, Lenz E. Automatic assembly of three-dimensional structures via connectivity graphs. Ann CIRP 1989; 38: 25–28
De Fazio, TL, Whitney DE. Simplified generation of all mechanical assembly sequences. IEEE J Robotics Automat 1987; RA-3: 640–658
Haynes LS, Morris GH. A formal approach to specifying assembly operations. Int J Mach Tools Manuf 1988; 28: 281–298
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1991 Springer-Verlag London Limited
About this chapter
Cite this chapter
Kroll, E., Lenz, E., Wolberg, J.R. (1991). Intelligent Analysis and Synthesis Tools for Assembly-Oriented Design. In: Pham, D.T. (eds) Artificial Intelligence in Design. Artificial Intelligence in Industry Series. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-74354-2_6
Download citation
DOI: https://doi.org/10.1007/978-3-642-74354-2_6
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-74356-6
Online ISBN: 978-3-642-74354-2
eBook Packages: Springer Book Archive