Zusammenfassung
Hydrostatisches Strang- und Fließpressen ist Strang-bzw. Fließpressen mit Wirkmedien und gehört zu den Fertigungs verfahren Druckumformen, Untergruppe Durchdrücken (DIN 8583 Bl. 6). Es sind Verfahren der Massivumformung.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur zu Kapitel 3
Robertson, J.: British Patent No. 19356, 14. Oktober 1893.
Bridgeman, P.W.: Large plastic flow and fracture. Metallurgy and Metallurgical Engineering Series. New York: McGraw-Hill 1952.
Bridgeman, P.W.: Physics of high pressure. International Textbook of Exact Sciences. London: Bell amp; Sons 1949.
Pugh, H.L1.D.: Ramless extrusion. Brit. Patent Nr. 20500, 1961.
Pugh, H.L1.D.: Recent developments in cold forming. Bulleid Memorial Lectures, Vol. IIIB, University of Nottingham 1965.
Pugh, H.L1.D.; Ashcroft, K.: Das hydrostatische Strang-und Fließpressen von Metallen. Industrie-Anzeiger 86 (1964) 605–612.
Pugh, H.L1.D.: Die Anwendung hoher Drücke beim Zugumformen. Industrie-Anzeiger 90 (1968) 970–973.
Pugh, H.L1.D.: Die Anwendung hydrostatischen Druckes beim Umformen von Metallen. Industrie-Anzeiger 90 (1968) 1403–1407.
Pugh, H.L1.D.: The mechanical behaviour of materials under pressure. Amsterdam, London, New York: Elsevier Publishing Co. Ltd. 1970.
Pugh, H.L1.D.; Low, A.H.: The hydrostatic extrusion of difficult metals. J. Inst. Metals 93 (1964/65)201–217.
Low, A. H.; Donaldson, C. J.; Wilkinson, P. T.: Developments in hydrostatic extrusion at the National Engineering Laboratory. In: High pressure engineering. London: The Institution of Mechanical Engineers (1968) 188–196.
Pugh, H. LI. D.: Redundant work and friction in the hydrostatic extrusion of pure aluminum and an aluminum alloy. J. Mech. Eng. Science 6 (1964) 362–370.
Beresnev, B.I.; Vereščagin, L.F.; Rjabinin, Ju.N.; Vivšic, L.D.: Some problems of large plastic deformations of metals at high pressures. London: Pergamon Press Ltd. 1963.
Beresnev, B.I.; Bulychev, D.K.; Rodionov, K.P.: Besonderheiten des Strangpressens von Metallen mittels hochgespannter Flüssigkeiten bei erhöhten Temperaturen. Fiz. Metal. Metalloved. 11 (1961) 115–121 (russ.).
Alexander, J.M.; Lengyel, B.: Hydrostatic extrusion. London: Mills amp; Boon 1971.
Inoue, N.; Nishihara, M.: Hydrostatic extrusion, theory and applications. London, New York: Elsevier Applied Science Publishers 1985. Mit folgenden Beiträgen
Osakada, K.; Mellor, P.B.: Fundamentals of hydrostatic extrusion, 7–20.
Osakada, K.; Mellor, P.B.: Mechanics of hydrostatic extrusion, 21–40.
Wilson, W. R.D.: Lubrication in hydrostatic extrusion, 41–71.
Mitsugi, S.; Scido, M.: Cold and warm hydrostatic extrusion process, 97–138.
Nishihara, M.: Hot hydrostatic extrusion process, 139–163.
Yamaguchi, M.: Extrusion press and auxiliary equipment, 164–193.
Yamaguchi, M.: Tooling for hydrostatic extrusion, 194–224.
Scido, M.; Mitsugi, S.: Clad composite metals, 249–283.
Fiorentino, R. J.: Selected hydrostatic extrusion methods and extruded materials, 284–322.
Osakada, K.: Fine wires, 323–332.
Inoue, N.: Polymers, 333–358.
Matsushita, T.; Noguchi, M.; Arimura, K.: Hot hydrostatic extrusion of Ti/Cu-alloy composite materials. Journal of the Society of Materials Science Japan 37 (1988) 107–113.
Nishihara, M.; Matsushita, X; Yamaguchi, Y.; Yamazaki, T.; Noguchi, M.: Hot hydrostatic extrusion of steel. Proc. 20th Machine Tool Design Research Conf., Birmingham 1979, 87–92.
Nishihara, M.; Noguchi, M.; Matsushita, X; Yamaguchi, Y: Hot hydrostatic extrusion of nonferrous metals. Proc. 18th Machine Tool Design Research Conf., Birmingham 1977, 91–96.
NN: Composite products manufactured through hot hydrostatic extrusion process. Kobelco Technology Review 1987, 1, 47–48.
Matsushita, X.; Yamaguchi, Y; Noguchi, M.; Nishihara, M.: Hydrostatic extrusion of round and shaped tubes. Journal of Mechanical Working Technology 2 (1978) 33–51.
Scido, M.; Mitsugi, S.: Hydrostatisches Strangpressen und Scine industrielle Anwendung. Draht 33 (1982) 471–475.
Hogland, R.; Ermel, D.: Stand und Anwendungsmöglichkeiten des hydrostatischen Strangpressens. Aluminium 55 (1979) 223–225.
Hogland, R.; Ermel, D.: Neue Anwendung für Aluminiumlegierungen durch hydrostatisches Strangpressen. Metall 33 (1979) 827–829.
Blazynski, T.Z.; Matin, M.: The response of implosively prewelded arrays of rods to processing by hydrostatic extrusion. Journal of Mechanical Working Technology 6 (1982) 291–302.
Breme, J.: Hydrostatisches Strangpressen: Grenzen und Möglichkeiten. Maschinenmarkt 85 (1979) 1406–1408.
Fiorentino, R. J.; Richardson, B.D.; Sabroff, A.M.; Boulger, F. W.: New developments in hydrostatic extrusion. In: Proc. of the Inter. Conf. on Manufacturing Technology. Ann Arbor, Michigan 1967, 941–954.
Kerspe, J.-H.: Hydrostatisches Fließpressen: Verfahrensparameter und Werkstückeigenschaften. Berichte aus dem Institut für Umformtechnik, Univ. Stuttgart, Nr. 69. Berlin, Heidelberg, New York, Tokyo: Springer 1983.
Sauve, C: Lubrication problems in the extrusion process. J. Inst. Metals 93 (1965) 553.
Alexander, J.M.; Lengyel, B.: Brit. Complete Specifications No. 12326/65, No. 56241/66 und No. 41249/67.
Bolotin, V.V.: Nonconservative problems on the theory of elastic stability. Oxford: Pergamon Press 1963.
Ondracek, E.; Pelar, E.: Umformen unter hydrostatischem Druck. Strojirenstvi 15 (1965) 270–277 (tschech.).
Pawelski, O.: Hydrostatisches Stauchen. Industriekurier, Technik und Forschung 20 (1967) 682, 684, 686.
Geiger, R.: Stofffluß und Festigkeitsverteilung konventionell und hydrostatisch voll-vorwärts-fließgepreßter Werkstücke. Industrie-Anzeige 94 (1972) 1579–1582.
Sugondo, S.: Hydrostatisches Fließpressen von Profilen unter Verwendung von Matrizen mit stetigem Übergang. Ber. aus dem Institut für Umformtechnik, Univ. Stuttgart, Nr. 88. Berlin, Heidelberg, New York, Tokyo: Springer 1986.
Johnson, S.: Fortschritte beim hydrostatischen Strangpressen. Draht-Welt 54 (1968) 209–213.
Fiorentino, R. J.; Meyer, G.E.; Byrer, T. G.: The thickfilm hydrostatic extrusion process. Technical paper MF 71–103, Society of Manufacturing Engineers, 1971.
Iyenger, H.S.R.; Rice, W.B.: Fluid film lubrication in hydrostatic extrusion. Annals of the C.I.R.P., Vol. XVII (1969) 117–122.
Ruppin, D.; Müller, K.: Hydrostatisches Strangpressen mit Schmiermittelminimierung (,Hydrafilm-‘Verfahren). Neue Verfahren der Massivumformung, Symp. der Deutschen Gesellschaft für Metallkunde, Bad Nauheim 23.10.1981 (1983) 197–210.
Kerspe, J.-H.: Stick-Slip-Verhalten und hydrodynamische Schmierungsbedingungen beim hydrostatischen Fließpressen. Industrie-Anzeiger 106 (1984) 27–28.
Häußler, G.; Schreiter, G.; Schlegel, J.; Hennig, W.: Beitrag zum hydrostatischen Strangpressen von Aluminium. Neue Hütte 28 (1983) 426–431.
Sheljaskow, Sh.: Dickfilm-Kaltfließpressen. Draht 31 (1980) 274–277.
Breme, J.: Hydrostatisches Strangpressen: Eigenarten und Einflüsse beim Umformen von Metallen. Maschinenmarkt 85 (1979) 1112–1114.
Lambert, E. R.; Kobayashi, S.: A theory of the mechanics of axisymmetric extrusion through conical dies. J. Mech. Eng. Sci. 10 (1968) 367.
Avitzur, B.: Hydrostatic extrusion. Trans. A.S.M.E. Serie B, Vol. 87 (1965) 487–494.
Hillier, M. J.: A hydrodynamic model of hydrostatic extrusion. Int. J. Prod. Research 5 (1966) 171–181.
Yang, D.Y.; Lange, K.: On the equivalent friction factor in hydrofilm extrusion. Int. J. Mech. Sci. 25 (1983) 277–281.
Han, C.H.; Yang, D.Y.: A new formulation for three-dimensional extrusion and its application to extrusion of clover sections. Int. J. Mech. Sci., Vol. 28 (1986) 201–218.
Yang, D. Y; Han, C. H.; Lee, B. C: The use of generalized deformation boundaries for the analysis of axisymmetric extrusion through curved dies. Int. J. Mech. Sci., Vol. 27 (1985) 653–663.
Avitzur, B.: Study of flow through conical converging dies. Wire Industry 49 (1982) 449–454/457.
Yang, D. Y.; Han, C.H.; Kim, M.U.: A generalized method for analysis of three-dimensional extrusion of arbitrarily-shaped sections. Int. J. Mech. Sci., Vol. 28 (1986) 517–534.
Iwata, K.; Osakada, K.; Fujino, S.: Analysis of hydrostatic extrusion by the finite element method. Trans. A.S.M.E., J. Eng. Ind., A.S.M.E.-paper No. 71-Prod-C.
Hornmark, N.; Nilsson, J.O.H.; Mills, C.P.: Quintus hydrostatic extrusion. Metal forming 37 (1970)227–233.
Erbe, R.: Hydrostatisches Strangpressen-ein neuer Hochdruckprozeß der Umformtechnik. Klepzig Fachberichte 79 (1971) 258–261.
Samanta, S.K.: Hydrostatisk sprutning av tråd. Jernkontorets Annaler 152 (1968) 29–34 (schwed.).
Lengyel, B.; Culver, L.E.: Properties of materials extruded by orthodox hydrostatic extrusion. J. Inst. Metals 97 (1969) 97–103.
Lengyel, B.: Design of experimental and production equipment. Pressure vessels. Lectures 3 and 4. In: Post experience course-hydrostatic extrusion. Imperial College of Science and Technology, London, Juli 1969.
Groenbaek, J.: Stripwinding of tools for bulk metal forming. Lyngby, Techn. Univ. of Denmark, Ph.D. thesis 1981 (dänisch).
Groenbaek, J.: Application of stripwound tools in high and low volume cold forging production. Proc. 7th Int. Cold Forging Congress, Birmingham 1985.
Adler, G.; Walter, K.: Berechnung von einfachen und mehrfachen Preßpassungen. Ind.-Anz. 89 (1967) 805–809.
VDI-Richtlinie 3176: Vorgespannte Preßwerkzeuge für das Kaltumformen. Düsseldorf: VDI-Verlag Ausg. Oktober 1986.
Pugh, H. L. D.; Donaldson, C. J.H.: Hydrostatic extrusion a review.Annals of the C.I.R.P. Vol. 21/892 (1972) 283–292.
Lengyel, B.; Marques, M. J. M. B.: Hydrostatic extrusion of tubes with a fixed mandrel. Proc. 20th Int. Conf. of MTDR, Birmingham, 10.-14.9.1979, 113–117.
Ruppin, D.; Müller, K.: Kaltstrangpressen von Aluminiumwerkstoffen mit Druckfilmschmierung. Teil I: Aluminium 56 (1980) 263–268, Teil II: 329-331, Teil III: 403-406.
Ruppin, D.; Müller, K.: Vergleichende Untersuchung des Hydrafilmpressens und des indirekten Strangpressens mit hydrostatischen Schmierverhältnissen. Aluminium 55 (1979) 711–715.
Yang, D. Y.; Lange, K.: Analysis of hydrofilm extrusion of three-dimensional shapes from round billets. Int. J. Mech. Sci., Vol. 26 (1984) 1–19.
Lee, CM.; Yang, D. Y.; Lange, K.: Numerical analysis of three-dimensional extrusion of ellipticsections by the method of weighted-residuals. Int. J. Mech. Sci., Vol. 31 (1989) 379–393.
Normen
DIN 8583 Blatt 6: Fertigungsverfahren Druckumformen. Durchdrücken Ausg. August 1969.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1993 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Geiger, R. (1993). Umformen mit hohen hydrostatischen Drücken, hydrostatisches Strang- und Fließpressen. In: Lange, K. (eds) Umformtechnik Handbuch für Industrie und Wissenschaft. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-58047-5_3
Download citation
DOI: https://doi.org/10.1007/978-3-642-58047-5_3
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-63451-2
Online ISBN: 978-3-642-58047-5
eBook Packages: Springer Book Archive