Zusammenfassung
Die Kohlenstoffasern gehören wegen der zweidimensionalen kovalenten Bindungen strukturmäßig zu den Schichtwerkstoffen [2.1]. Ein hoher Orientierungsgrad der Graphitkristalle und 100% Parakristallinität sowie die 2D-Struktur bestimmen das herausragende Eigenschaftsbild der Kohlenstoffasern in Abb. 2.1.1. Sie sind aus heutiger Sicht die interessantesten Verstärkungsfasern für Verbundwerkstoffe.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literaturverzeichnis
Blumberg, H.: Stand und Entwicklungstendenzen für Hochleistungs-Polymer-und Kohlenstoffasern; 28. Internationale Chemiefasertagung, Dornbirn, September 1989
Rose, G.P.: Hochfeste Kohlenstoffasern: Herstellung und Eigenschaften; Ingenieurwissen; Kohlenstoff-und aramidfaserverstärkte Kunststoffe, VDI-Verlag GmbH, Düsseldorf, 1977
N.N.: Technik-Werkstoffe; Härene Stärke; Der Spiegel, Nr. 12, 1969
Fitzer, E.; Weiß, R.: Oberflächenbehandlung von Kohlenstoffasern; Verarbeiten und Anwenden kohlenstoffaserverstärkter Kunststoffe; VDI-Verlag GmbH, Düsseldorf, 1989
Fitzer, E.: Neue Entwicklungen für Faserverbundwerkstoffe, Handbuch für neue Systeme; Hrsg. Demat Exposition Managing; Vulkan-Verlag, Essen, 1992
Edie, D.; Fitzer, E.; Rhee, B.: Present and Future Reinforcing Fibers — From Solid to Hollow; Verbundwerk, Wiesbaden, 1991
Spengler, H.; van Galen, J.: Herstellung von Kohlenstoffasern aus Steinkohlenteerpech; BMFT-Verbundprojekt 03M1015: Verbundpartner: AKZO, Wuppertal; Rütgerswerke AG, Frankfurt; TU Karlsruhe (Institut für Chemische Technik); Universität Erlangen (Institut für Technische Chemie), 1990
McGuire, C; Vollerin, B.: Thermal Management of Space Structures; SAMPE-European Chapter, 1990
Flemming, M.; Pönitzsch, W.; Roth, S.: Die Jagd nach Kosten-und Gewichtsreduzierungen; Technische Rundschau 46/90, Hallwag Verlag, Bern, 1990
Sin Shoug Lin: Recent Developments of Carbon Fiber in Japan; SAMPE-Journal, Volume 28, Nr. 4, July/August 1992
Brown, D. Kyle; Phillips, Wayne M.: SAMPE-Journal, Volume 26, Nr. 5, September/October 1990
Tse Hao Ko: Effects of Stabilization on the Properties of PAN-based Carbon Fibers during Air Oxidation; SAMPE-Quarterly, Volume 22, Nr 2, January 1991
N.N.: SACMA (Suppliers of Advanced Composites Materials Association): Standardization of reporting of carbon fiber tensile modulus; Advanced Composites, May/June 1991
N.N.: Datenblatt von Fortafil Carbon Fibers, AKZO, Technical Data Sheet 902 A Fortafil 3 (C) “Continuous Carbon Fiber,” Fortafil Fibers, Inc., Rockwood, 1992
Sin Shoug Lin: Oxidative Stabilization in Production of Pitch Based Carbon Fiber; SAMPE-Journal, Volume 27, Nr. 1, January/ February 1991
Ischikawa, T.; Nagaoki T.: Recent Carbon Technology Including Carbon and SIC Fibers; English Editor: I.C. Lewes, JEC Press Inc. 1983
Böder, H.; Neumann, U.: Kohlenstoffasern als Verstärkungsmaterial für eine neue Klasse von Konstruktionswerkstoffen, Kunststoffe 73/6, 1983
Eyerer, P.; Heißler, H.: Verstärkte Kunststoffe in der Luft-und Raumfahrt; Kohlmanner-Verlag, 1988
N.N.: BASF-Broschüre: Pilotprojekt Brücke auf dem Firmengebäude der BASF in Ludwigshafen
Mc Connel, V.P.: Can composites rebuilt Amercia’s infrastructure, Advanced Composites, Nov./Dez. 1992
N.N.: BASF-Broschüre: High strength tension member made of carbon fiber composites
Roth, S.; Grüninger, P.G.: Beitrag zur Deutung des Querzugversagens von Stranglaminaten; Vortrag auf der AVK-Tagung, Freudenstadt, 1969
Bunsell, A.R.: Composite Materials Series, 2; Fibre reinforcements for composite materials, Chapter 8, Elsevier Science Publishers, msterdam, 1988
Marzullo A.: SAMPE Journal, Vol 28, No. 6, November/ Dezember 1992
Schoenberg, T.: Boron and Silicon Carbide Fibers.; Eng. Mat. Handbook, Vol. 1, Composites, ASNA, Mutals Park, Ohio 4473, 1987
Hoffmann, P.R.: The international review of aerospace design and development; Textron Specialty Materials, World Aerospace Technology 1992
Mittnik, Melvin A.: Continuous SiC fibre reinforced metals; SAMPE-Journal, Volume 26, Nr. 5, September/October 1990
Thompson, B.; LeCostaonec, J.-F.: Recent developments in SiC-Monafilament Reinforced Si3N4 Composites; SAMPE Quarterly, Volume 22, Nr. 3, April 1991
Galasso, F. u.a.: Preparation, Structure and Properties of Continuous Silicon Carbide Filaments; Appl, Phys. Lett., Band 9, pp. 37–39, 1966
N.N.: Datenblatt über Nicalon-Silicon Carbide Continuous Fiber, Nippon Carbon Co., LTD, 6-1, Hatchobori 2-chome, Chuo-Ku, Tokyo
Wawner, F.E.; Nutt, S.R.: Investigation of Diffusion Barrier Materials on Silicon Carbide Filaments; Ceram. Eng. and Sci. Proc. Band 1, pp. 709–719, 1980
Ogbuji, O. u.a.; The ß and ∂ Transformation in Polycristalline SiC: IV, A Comparison of Conventionally Sintered, Hot Pressed, Reaction-Sintered, and Chemical-Vapor Deposited Samples; 1st Annual Meeting, The American Ceramic Society, Cincinatti, Ohio, May 1, 1979
White, R.C.; Midlothian; Dabis H.R.: Silicon Carbide Structures; U.S. Patent 3, 508, 954 April 28, 1970
Hartmann, H.; Nußbaum, HJ.: Neues über Aluminiumoxyd-faserverstärkte Verbundstoffe; 20. Internationale Chemifasertagung, Dornbirn, 1981
Cooke, T.F.: Fiber Reinforcement; Handbook of Composite Reinforcements, Edited by Lee, M.S., VCH-Verlagsgesellschaft, einheim, 1993
Bunsell, A.R.: Fiber Reinforcement; Handbook of Composite Reinforcements, Edited by Lee, M.S., VCH-Verlagsgesellschaft, einheim, 1993
Miller, W.C.: Fibers and Nonwoven Fabrics; in Encyclopedia of Textiles; edited by Grayson M., pp 443–450, Wiley, New York, 1984
Tretzel, J.; Achtsnit H.D.; Bohler, J.; Gimpel M.; Herwig H.U.; Wegerhoff, A.: Production, Processing and Application of Enka Silica Fibers; 57th Annual TRI Conference, Charlotte, NC, April 21-22, 1987
Brocke, P.; Schurmans, H.; Verhoest, J.: Inorganic Fibers and Composite Materials; A Survey of Recent Developments, Pergamon Press, xford, 1984
Romine, J.C.: Ceramic Engineering and Scientific Proceedings; 11th ACS Annual Conference on Composites and Advanced Ceramic Materials, 1987
Verbeck, W.: German Patent 2,218,960; 1973
Penn, B.G.; Ledbetter, III, F.E.; Clemons, J.M.; Daniels, J.G.: Journal of Appl. Polymers Sciences, 27(10), p. 3751, 1982
Penn, B.G.; Daniels, J.G.; Ledbetter, III, F.E.; Clemons, J.M.: Industrial Engineering, Chemical Process Design Developments p 217, 1984
Lin, R.Y.; Economy, J.; Murty, H.H.; Ohnsorg, R.: Appl. Polym. Symp., 29, 175, 1976
N.N.: Der Neue Brockhaus, zweiter Band, E-J; F.A. Brockhaus, Wiesbaden 1960
Flemming, M.; Musch G.: Werkstoffkennwerte; ETH-Zürich, Institut für Konstruktion und Bauweisen, interne Broschüre, 1989
Schneider, H.; Schneider, L.: Lexikon Naturwissenschaft in der Alltagssprache; Wolfgang Krieger Verlag
Hagen, H. u.a.: Glasfaserverstärkte Kunststoffe, Kap. 1.4, Glasfasern; Springer Verlag, 1961
Neumüller, O.-A.: Taschenlexikon der Chemie, ihrer Randgebiete und Hilfswissenschaften; Franck’sche Verlagshandlung, Stuttgart, 1977
N.N.: dtv-Lexikon der Physik, Deutscher Taschenbuch Verlag, August, 1970
Michaeli, W.; Wegener, M.: Einführung in die Technologie der Faserverbundwerkstoffe; Carl Hanser Verlag, München, 1989
Meyer, O.: Glasfasern für die Verstärkung von Kunststoffen; Kunststoff-Rundschau, 2. Jahrgang, Heft 4, 1955
Krevelen, D.W. van: Verbundwerkstoffe (Composites); 22. Internationale Chemiefasertagung, Dornbirn, 1983
Kleinholz, R.: Neue Erkenntnisse bei Textilglasfasern zum Verstärken von Kunststoffen; 22. Internationale Chemiefasertagung, Dornbirn, 1983
Meyer, O.: Glasfasern für die Verstärkung von Kunststoffen; Kunststoff-Rundschau, 2. Jahrgang, Heft 3, 1955
Freytag, H.; Koch, P.-A.: Glasfäden-Untersuchungen; Einführung, Begriffserklärung, allgemeine Problembetrachtung; Veröffentlichungsreihe der Deutschen Glastechnischen Gesellschaft e.V., 1943
Baer, E.: Hochentwickelte Polymere; Spektrum der Wissenschaft, pp 150–160, Dezember 1986
Hancork, T.A.; Spruiell, J.E.; White, J.L.: Wet spinning of aliphatic and aromatic polyamides; Journal of Applied Polymer Science, Vol. 21, pp. 1227–1247, 1977
Morgan, R.J.; Allred, E.A.: Aramid Fiber Composites; Handbook of Composites Reinforcements, pp. 5–22, Edited by Lee, S.M.; VCH-Verlagsgesellschaft mbH, Weinheim, 1993
N.N.: Die Aramidfaser für Hochleistungs-Verbundwerkstoffe — Twaron; AKZO-Broschüre, 42097 Wuppertal, 1994
Ehrenstein, G.W.: Faserverbund-Kunststoffe: Werkstoff-Verarbeitung-Eigenschaften; Carl Hanser Verlag, München, 1992
Dobb, M.G.; Johnson, DJ. and Saville, B.P.: Compressional behaviour of Kevlar fibres, Polymer, Vol 22, July 1981
Greenwood, J.H.; Rose, P.G.: Compressive behaviour of Kevlar 49 fibres and composites, Journal of materials science, pp. 1809–1814, 1974
Dobb, M.G.; Johnson, D.J.; Saville, B.P.: Direct observation of structure in High-Modulus aromatic Fibers; Journal Polymer Science (Polym. Symp.), 58, pp.237–251,1977
Panar, W.; Avakian, P.; Blume, R.C.; Gardner, K.H., Gierke, T.D., Yang, H.H.: Morphology of Poly (p-Phenylene Terephthalamide) Fibers; Journal of Polymer Science: Polymer Physics Edition, Vol. 21, pp. 1955–1969;1983
Rosen, B.W.: Mechanics of Composite Strengthening in Fibre Composite Materials; American Society for Metals, Metals Park, Ohio, p. 37; 1965
Dobb, M.G.; Johnson, D.J.; Saville, B.P.: Supramolecular Structure of a High-Modulus Polyaromatic Fiber (Kevlar 49); Journal Polymer Science (Polymer Physics Edition ), 15, pp..2201–2211; 1977
Hillermeier, K.: Aramidfasern; Ingenieurwissen, Kohlenstoff-und aramidfaserverstärkte Kunststoffe, VDI-Verlag, Düsseldorf 1977
Morgan, R.J.; Fung-Ming Kong; Lepper, K.: Laser-Induced Damage Mechanisms of Kevlar 49-Epoxy Composites; Journal of Composite Materials, Vol. 22, Nov. 1988
Morgan, R.J.; Pruneda, CO.; Butler, N.; Kong, F.M.; Caley, L.E.; Moore, R.L.: The Hydroliytic Degradation of Kevlar 49-Fibres; Proceedings of the 29th Nat. Sampe Symposium, pp. 891–902, 1984
Dobb, M.G.; Johnson, DJ.; Majeed, A.; Saville, B.P.: Microvoids in aramid-type fibrous polymers; Polymer, Vol 20, October, 1979
Northolt, M.G.: Aramids-bridging the gap between ductile and brittle reinforcing fibers, AKZO Research Laboratories, Arnheim
N.N.: The Effect of Ultraviolet light on Products Based on Fibers of Kevlar 29 and Kevlar 49-Aramid; Du Pont Technical Report C-29;1977
Fellers, J.F.; Lee, J.S.: SAXS Studies of Polymeric Materials Used in Performance Composites; Lawrence Livermore National Laboratory Contract, P.O. 2819401, Final report, June 1985
Tallent, M.A.; Cordova, C.W.; Cordova, D.S.; Donnelly, D.S.: Thermoplastic Fibers for Composite Reinforcement; Handbook of Composite reinforcements, pp. 634–648, Edited by Lee, S.M; VCH-Verlagsge-sellschaft mbH., Weinheim, 1993
Hinrichsen, G.: Superfeste Polyethylenfasern; Spektrum der Wissenschaft, Heidelberg, November 1986
N.N.: Dyneema SK60-High performance fibers in composites; Broschüre der Firma DSM High Performance Fibers B.V.; Eisterweg 3, NL 6422 PNHeerlen, 1988
Kirschbaum, R.; Yasuda, H.; Gorp v., E.H.M.: High strength/high modulus polyethylene fibres; 25. Internationale Chemiefasertagung, ornbirn, 1986
N.N.: Diolen 164S, 173; Broschüre der Firma AKZO
Schwarz, O.: Kunststoffkunde, Vogel Fachbuch Technik, Berufspraktische Ausbildung; Vogel Buchverlag Würzburg, 2. Auflage, pp. 115–122, 1988
Koser, U.; Stellbrink, K.U.: Matrixloser Faserverbund; DLR-Nachrichten, Heft 72, August 1993
Lindquist, P.F.; u.a.: Crystal Structure of Vapor — Deposited Boron Filaments; Journal of Applied Physics, Volume 39, Number 11, 1968
De Bolt, H.E.: Boron an other high strength, high modulus, low-density filamentary reinforcing agents; Specialty Material Division, AVCO Corporation, Lowell, Massachussetts
Wawner, F.E.; Eason, J.W.; De Bolt, H.E.; Suplinskas, R.D.: Some aspects of boron filament elongation; Ceramic Engineering and Science; Proc, Band 1, Heft 7-8 (A), pp. 340–347, 1980
N.N.: Härene Stärke; Der Spiegel 12,1969
Wawner, F. E. jr.; Boron Filaments, Modern Composite Materials; Chapter 10, 1st. Ed.; Addison + Wesley, 1967
Eason, J.W.: Modell for the Elongation of Boron on Tungsten During Chemical Vapor Deposition; Ceramic Engineering and Science; Proc; Band 1, Heft 7-8 (B), pp. 693–708, 1980
Mehalso, R.M.; Diefendorf, R.J.: Kinetics of Boron deposition by the Hydrogen Reduction of Boron Trichloride; Fifth International Conference on CVD; Electrochemical Society, Princeton, pp. 84–98, 1975
Carlton H.E.; Oxley, J.; Hall, E.: Kinetics of the hydrogen reduction of boron trichloride to boron; Second International Conference on CVD, Electromechanical Society, pp. 209–225, 1970
Carlsson, J. O.: Factors influencing the morphologies of Boron deposited by chemical vapour deposition; Journal of the Less Common Metals, 70, pp. 77–96, 1980
Bhardwaj, Jayant, Krawitz, Aaron D.: The Structure of Boron in Boron Fibres; Journal of Materials Science 18, pp.. 2639–2649, 1983
Di Carlo, J. A.: National Aeronautics and Space Administration, Lewis Research Center, Cleveland, Ohio 44 135
De Bolt, H.; Davis, H.: Carbon Filament Coated with Boron and Method for Making Same, U.S. Patent 4, 142, 008, Feb. 1979
Mehalso, E.M.; Diefendorf, R.J.: High strength — High Modulus Boron Vapor Deposited on a Carbon Monofilament Substrate
Lee J.A.; Mykkanen D.L.: Metall and Polymer Matrix Composites, Noyes Data Corporation, Park Rigde, New Jersey, U.S.A, 1987
Mehalso, R.M.; Diefendorf, R.J.: Vapor Deposition of high strength-high-modulus Boron on a Carbon monofilament substrate; Glask, F.A. (Ed.) 3rd International Conference on Chemical Vapor Deposition Proc., Salt Lake City, Utah, Am. Nucl. Soc; pp. 552–560, 1972
Wawner, F.E.; Nutt, S.R.: Investigation of Diffusion Barrier Materials on Silicon Carbide Filaments; Ceramic Engineering and Science, Proceedings, Bd. l,Juli/Aug. 1980
Ufer, E.: Hollow-fibres in fibre-reinforced plastics; its advantages and limitations. Verbundwerk’ 91, 3rd International Conference on Reinforced Materials and Composite Technologies, 1991
Niederstadt, G.: Möglichkeiten zur Erhöhung der Biegesteifigkeiten von CFK-Schichtstoffen mittels Hohlfasereinlage; DFVLR-Braunschweig, Bericht Nr. IB 152-80/05-1980
Semrau, HJ.: Untersuchung des Knick-und Beulverhaltens von unidirektionalen Hohlglasfaser-Carbon-Mischlaminaten anhand von Gütezahlvergleichen; Dornier GmbH-Bericht Nr. SK80-190/78-1978
Flemming, T.: Vergleich der mechanischen Eigenschaften und des Umformverhaltens zwischen gerichteten kurz-und langfaserverstärkten Thermoplasten; Dissertation an der TU München, Institut für Werkstoff-und Verarbeitungswissenschaften, 1994
Niederstadt, G.; Gädke, M.; Bäuml, H.: Untersuchungen von Hohlglasfasern für die Verbundwerkstoffentwicklungen; DFVLR-Institut für Flugzeugbau, Braunschweig, Berichts-Nr. DLR-FB 76–45
Bäuml, H.: Vorversuche an Hohlglasfaserlaminaten und Einzelfasern im Raster-Elektronenmikroskop mit Zugbelastung zur Darstellung mikroskopischer Verformungen und Bruchvorgänge; DFVLR-Braunschweig, Institut für Strukturmechanik; Interner Bericht IB 152-77/19-1977
Fitzer, E.; Fritz, W.; Geigl, K.H.; Müller, T.: Hohle Kohlenstoffasern-eine neue Generation von Kohlenstoffasern; Carbon’ 80, Proceedings of the 3rd International Carbon Conference, Baden-Baden, June 30-July 4, 1980
Geigl, K.H.: Studien zur Oberflächenchemie von Kohlenstoffasern und zur Entwicklung von Kohlenstoffhohlfasern; Dissertation, Universität Karlsruhe, 1979
Rhee, B.S.; Ryu, S.K.; In, S.J.; Kim, J.P.; Yo, Y.G.: The Mechanical Properties of C-and Hollow-Shaped Carbon Fiber According to the Fiber Thickness; Proceedings of the Twentieth Biennial Conference on Carbon, Santa Barbara, CA., pp. 306–307, June 23-28, 1991
N.N.: Properties of Industrial Fibers; Broschüre der Fa. AKZO Fibers; p. 56; Published by AKZO Fibers; Arnheim, January 1993
Kumar, S.: Ordered Polymer Fibers; Handbook of Composite Reinforcements, Edited by Lee, M.S.; VCH Verlagsgesellschaft, einheim, 1993
Cassidy, P.E.: Thermally Stable Polymers, Marcel Dekker, Inc., New York, 1980
Lysenko, Z: US Patent 4.766.244, to Dow Chemical Co.; Aug. 23, 1988
Ledbetter, H.D.; Rosenberg, S.; Hurtig, C.W.: An integrated laboratory process for preparing rigid rod fibers from the monomers; The Materials Science and Engineering of Rigid-Rod Polymers; Materials Research Society Symp. Proceedings, Pittsburg, p. 253, 1989
Reisch, M.S.: High-Performance Fibers Find Expanding Military, Industrial Uses; Chemical and Engineering News.Feb. 2, 1987
Odell, J.A.,; Keller, A.; Atkins, E.D.T.; Natgy, M.J.; Feijoo, J.L.; Ungar, G.: Orientability of rigid rodlike molecules in solution and controlled preparation of model systems; The Materials Science and Engineering of Rigid-Rod Polymers, Materials Research Society Symp. Proceedings, p. 223, Pittsburg, 1989
Berry, C: Properties of solutions of rodlike chains from dilute solutions to the nematic state; The Materials Science and Engineering of Rigid-Rod Polymers; Materials Research Society Symp.Proceedings, p. 181, Pittsburg, 1989
Chow, A.W.; Penwell, P.E.; Bitler, S.P.; Wolfe, J.F.: Synthesis and solution properties of some extended chain poly(benzazoles); Polymer Preprints (ACS), Bd. 28, p. 50, 1987
Arpin, M.; Strazielle, C: Characterization and conformation of aromatic polyamides: poly(l,4-phenylene therphthalamide) and poly(p-benz-amide) in sulphuric acid; Polymer, Bd. 18, p. 591, 1977
Blades, H.; US Patent 3, 767, 756, to E. I. Du Pont de Nemours and Co.; Oct. 23, 1973
Cohen, Y., Frost, H.H., Thomas, E.L.: Reversible Gelation in Polymers, ACS Symposium Series 350, p. 181; Edited by Russo, P., 1987
Cohen, Y; Thomas, L.: Microfibrillar Network of a Rigid Rod Polymer; American Chemical Society, 1988
Sawyer, L.C., Jaffe, M.: The Structure of Thermotropic Copolyesters; Journal of Material Science 21, pp. 1897–1913, 1986
Eggersdorfer, M.: Perspektiven nachwachsender Rohstoffe in Energiewirtschaft und Chemie, Spektrum der Wissenschaft, Heidelberg, Juni 1994
Schweiger, P.; Oster, W.: Nachwachsende Rohstoffe — Ergebnisse der Anbauversuche mit Miscanthus und Arundo donax; Informationen für die Pflanzenproduktion, Heft 7/1991; Hrsg.: Landesanstalt für Pflanzenbau, Forchheim (Baden-Württemberg), Ministerium für ländlichen Raum, Ernährung, Landwirtschaft und Forsten, 1991
Werner, D., Köhler, E.: Pflanzenfasern im Verbund — das Beispiel Chinaschilf, Spektrum der Wissenschaft, Heidelberg, Juni 1994
Röhrle, H., Schollen, R., Sigolotto, C, Sillbach, W.: Kraftflußberechnungen in Knochenstrukturen und Prothesen; Forschungsbericht des Bundesministeriums für Forschung und Technologie; Dornier Bericht 79/70A, Dornier GmbH, Dezember 1979
Renz-Rathfelder, S.: Palmengarten, Faserpflanzen; Graphik: Hr. Schäfer Senkenbergmuseum, Herausgeber Stadt Frankfurt am Main, Juni 1992
Wittig, W.: Einsatz von Naturfasern in Kfz-Bauteilen, VDI-Verlag GmbH, Düsseldorf, 1994
Koch, B.; Ruffieux, K.; Mayer, E.; Wintermantel, E.: Biogradable Textile Reinforced Polymers: Processing of a new degradable composite; ETHZürich, Techtextil Symposium, 1994
Rohatgi, P.K., Satayanarayana, K.G., Chand, N.: Natural Fiber Composites, Handbook of Composite Reinforcements, Edited by Lee, M.S.; VCH Verlagsgesellschaft mbH.; Weinheim, 1993
Tubach, M., Kessler, R.W.: Marktsituation und Einsatzbereiche von Flachs, Textilveredlung 29, Nr. 1/2, 1994
Baumgartl, H.; Schiarb, A.: Naturfaserverstärkte Verbundstoffe; Symposium “Nachwachsende Rohstoffe — Perspektiven für die Chemie”, Frankfurt a.M., 5./6. Mai 1993
Rowell, R.M.: Natural Composites Fiber Modification, Handbook of Composite Reinforcements, Edited by Lee, M.S.: VCH Verlagsgesellschaft mbH.; Weinheim, 1993
Hagen, H.: Glasfaserverstärkte Kunststoffe; pp. 186–192, Springer-Verlag, 1961
Mieck, K.P., Nechwatal, A., Knobeisdorf, C: Stand der Entwicklung zur Faser-Matrix-Haftung von Flachs in Verbundwerkstoffen aus thermoplastischer Matrix, Vortrag zum 5. Reutlinger Flachsymposium 1994 “Quo vadis Flachs?” 7.3.–8.3. 1994
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1995 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Flemming, M., Ziegmann, G., Roth, S. (1995). Faserarten. In: Faserverbundbauweisen. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-57776-5_2
Download citation
DOI: https://doi.org/10.1007/978-3-642-57776-5_2
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-63352-2
Online ISBN: 978-3-642-57776-5
eBook Packages: Springer Book Archive