Abstract
High-speed machining is an advanced production technology with great future potential. However, as has been in many other realizations of technological progress, the implementation of fundamental knowledge of highspeed machining into the manufacture of industrial products took a relatively long time. In this particular case, the period of approximately 60 years was not only due to a cautious attitude of the industry, but also to the production facilities existing at the time when the first findings became available from research not meeting the requirements of high-speed machining.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literature
Brussel H van (1998) Braembussche van den: robust control of feed drives with linear motors. Ann CIRP 47:325–328
Colwell LV, Quackenbush L J (1962) A study of high-speed milling. Report nos. 05038-1 and 2-F, parts I and II, Office of Research Administration, University of Michigan
Deutsche Patentschrift Nr. 523594 (1931) Verfahren zur Bearbeitung von Metallen oder bei einer Bearbeitung durch schneidende Werkzeuge sich ähnlich verhaltener Werkstoffe.
E DIN EN ISO 15641 (1998) Milling tools for high speed machining, safety requirements. Beuth, Berlin
Heisel U, Gringel M (1997) Machine tool design requirements for high-speed machining. Ann CIRP 46:389–392
King RI (1977) The chipmaking revolution. Am Machinist 121:135–139
King RI (1976) High-speed production milling of non-ferrous materials. In: Proceedings of the Fourth North American Metals Research Conference
King RI (1997) Ultrahigh-speed machining research of nonferrous metals manufacturing technology. Lockheed Missiles Space 2:83–92
King RI (1978) The benefits of ultra high-speed machining. Tool Prod
King RI (1980) Results of some recent research on the high-speed machining of nickel-aluminium-bronze. Purdue University, West Lafayette, Ind., June
King RI (1981) High-speed machining revs up. Am Machinist pp 130–133
King RI, McDonald JG (1976) Product design implications of new high-speed milling techniques. Trans ASME 98:1170–1175
King RI, McDonald JC (1967) Product design implications of new high-speed milling techniques. Trans ASME 11:1170–1175
Kronenberg M (1961) Gedanken zur Theorie und Praxis der Ultra Schnellzerspanung. TZ f. prakt. Metallbearb 55:443–446, 659–-664; 56:505–510
Kronenberg M (1961) Zweiter Zwischenbericht über die Vervielfachung heute üblicher Schnittgeschwindigkeiten. Werkstattstechnik 51:133–141
Krueck RT, Vaughn RL (1960) Recent developments in ultrahigh speed machining. Tool Eng pp 95–103
McGee FJ (1978) Manufacturing methods for high-speed machining of aluminium. Final technical report (DRDMI-EAT), requirement no. 6089, US Army Missile R&D Command
Pritschow G (1998) A comparison of linear and conventional electromechanical drives. Ann CIRP 47:541–548
Recht RF (1964) Catastrophic thermoplastic shear. Trans ASME 31:189–193
Recht RF (1964) Trans ASME 86:189–193
Rogers HC (1979) Adiabatic plastic deformation. Ann Revised Material Sci 9:283
Schmitt T (1996) Entwicklung einer lineardirektangetriebenen HSC-Fräsmaschine für den Werkzeug und Formenbau. In: Proceedings of the Ninth DFS Conference, Darmstadt, Germany
Schulz H (1998) Der Werkzeug und Formenbau braucht schnelle Maschinen. In: Proceedings of 3-D Erfahrungsforum Werkzeug und Formenbau, Darmstadt, Germany
Schulz H (1996) Hochgeschwindigkeitsbearbeitung. Carl Hanser, Munich
Schulz H (1997) Gegenwärtiger Stand und weitere Entwicklungen der Hochgeschwindigkeitsbearbeitung. Keynote paper, Fourth International Conference on Production Engineering, Opatija, Croatia
Schulz H (1998) High speed machining needs very fast and accurate machine tools. Proceedings of the International Seminar on Improving Machine Tool Performance, San Sebastian, Spain, pp 57–64
Schulz H (1998) Efficiency and accuracy of linear motor driven milling machine. Proceedings of the 1998 SAE Conference, Long Beach, Calif.
Schulz H (1989) Hochgeschwindigkeitsfräsen metallischer und nichtmetallischer Werkstoffe. Carl Hanser, Munich
Schulz H, Cebalo R (1995) High-speed machining. In: Proceedings of the Third International Conference on Production Engineering, Zagreb, Croatia, 23–24 November
Schulz H, Schall D, Rehnert I (1998) Einsatzgrenzen von Motorspindeln. Stahl pp 39–41
Schulz H, Würz T, Aschenbach B (1999) Werkzeuge angemessen wuchten. Werkstatt Betrieb 132:78–81
Shaw MC (1967) Machinability. Special report 9/4, The Iron and Steel Institute, London, p 1
Tanaka Y, Tsuwa H, Kitano M (1967) Cutting mechanism in ultra-high-speed machining. Trans ASME 67:14
Tönshoff HK, Karpuschewski B, Lapp C, Andrae P (1998) New machine techniques for high-speed machining. In: Proceedings of the International Seminar on Improving Machine Tool Performance, San Sebastian, Spain, pp 65–74
Vaughn RL (1958) Ultra-high speed machining — solution to productivity problems. Tool Eng pp 71–76
Vaughn RL (1960) Ultra-high speed machining. AMC technical report 60-7-625
Vaughn RL, Peterson AH (1958) New machine tools needed for metals of tomorrow. Production Engineering Section, Aviation R&D Handbook, pp 5–7
Vaughn RL, Quackenbush LJ (1966) The high-speed milling of titanium alloys, ASTME technical paper 66–151
[39] VDI 2056 (1996) Beurteilungsmaßstäbe für mechanische Schwingungen von Maschinen (Evaluation criteria for mechanical vibrations of machines). VDI, Düsseldorf
Von Turkovich BF (1972) On a class of thermomechanical processes during rapid plastic deformation (with special reference to metal cutting). Ann CIRP 21:15
Weck M, Wahner U (1998) Linear magnetic bearing and levitation system for machine tools. Ann CIRP 47:311–314
Weck M, Schumacher A (1998) Machine tools for high speed machining. In: Proceedings of the International Seminar on Improving Machine Tool Performance, San Sebastian, Spain, pp 27–42
Williamson DTN (1967) New wave in manufacturing. Am Machinist 3:143–154
Zirn O, Weikert S, Rehsteiner F (1997) Design and optimisation of fast axis feed drives using non-linear stability analysis. Ann CIRP 46:363–366
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2003 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Schulz, H. (2003). High-Speed Machining. In: Dashchenko, A.I. (eds) Manufacturing Technologies for Machines of the Future. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-55776-7_7
Download citation
DOI: https://doi.org/10.1007/978-3-642-55776-7_7
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-62822-1
Online ISBN: 978-3-642-55776-7
eBook Packages: Springer Book Archive