Abstract
The present work focused on the production of coatings of AISI1024, AISI1045 and AISIH13 over mild steel and AA6082-T6 over AA2024-T3 by friction surfacing. Performance criteria were established to quantify material deposition rate and specific energy consumption aiming to compare friction surfacing with most direct concurrent technologies such as laser and arc welding based cladding. Simple analytical models were developed to estimate the rod consumption and the power and energy consumption rates. Friction surfacing is a competitive technology considering energy efficiency and power consumption in comparison with mainstream processes. However, coating processes based on wire or powder feed are more competitive, since they allow continuous feeding of deposited material. The effect of process parameters was also assessed and it was seen they have different impacts on process efficiency and deposition rate for each material combination.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Dunkerton SB, Thomas WM (1984) Repair by friction welding. In: Proceedings of the conference on repair and reclamation, London, 24–25 Sept
Gandra J, Miranda R et al (2011) Functionally graded materials produced by friction stir processing. J Mater Process Technol 211(11):1659–1668
Hsu C, Kao P, Ho N (2007) Intermetallic-reinforced aluminum matrix composites produced in situ by friction stir processing. Mater Lett 61(6):1315–1318
Nicholas E (2003) Friction processing technologies. Weld World 47(11–12):2–9
Olson DL (1993) ASM handbook: welding, brazing, and soldering, vol 6. ASM International (In Chinese)
Sakihama H, Tokisue H, Katoh K (2003) Mechanical properties of friction surfaced 5052 aluminum alloy. Mater Trans 44(12):2688–2694
Shinoda T, Okamoto S et al (1996) Deposition of hard surfacing layer by friction surfacing. Weld Int 10(4):288–294
Suhuddin U, Mironov S et al (2012) Microstructural evolution during friction surfacing of dissimilar aluminum alloys. Metall Mater Trans A 43(13):5224–5231
Thomas W, Nicholas E et al (2002) Friction based welding technology for aluminium. Mater Sci Forum (Trans Tech Publications) 396:1543–1548
Thomas WN (1987) Friction surfacing. In: Proceedings of the 2nd international conference on flash-butt and friction welding, September, pp 124–140 (In Chinese)
Tokisue H, Katoh K et al (2006) Mechanical properties of 5052/2017 dissimilar aluminum alloys deposit by friction surfacing. Mater Trans 47(3):874
Vilaça P, Gandra J et al (2012) Aluminium alloys—new trends in fabrication and applications. Intech, pp 159–197 (In Chinese)
Vitanov V, Javaid N, Stephenson DJ (2010) Application of response surface methodology for the optimisation of micro friction surfacing process. Surf Coat Technol 204(21):3501–3508
Voutchkov I, Jaworski B et al (2001) An integrated approach to friction surfacing process optimisation. Surf Coat Technol 141(1):26–33
Acknowledgments
The authors would like to acknowledge FCT/MCTES funding for the project FRISURF (PTDC/EME-TME/103543/2008). JG acknowledges FCT/MCTES for funding its PhD. grant SFRH/BD/78539/2011. RM acknowledge Pest OE/EME/UI0667/2011.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Miranda, R.M., Gandra, J., Vilaça, P. (2014). Process Developments in Friction Surfacing for Coatings Applications. In: Xu, J., Cruz-Machado, V., Lev, B., Nickel, S. (eds) Proceedings of the Eighth International Conference on Management Science and Engineering Management. Advances in Intelligent Systems and Computing, vol 281. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-55122-2_105
Download citation
DOI: https://doi.org/10.1007/978-3-642-55122-2_105
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-55121-5
Online ISBN: 978-3-642-55122-2
eBook Packages: EngineeringEngineering (R0)