Abstract
Flexural characteristics of cantilever beam when subjected to laser heating pulse are presented in detail. High Velocity Oxy-Fuel Coating is presented and its practical applications are given in detail. In this chapter, the findings of the flexural motion and HVOF coatings are presented in detail.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
B.S. Yilbas, F. Mahmood, Flexural waves generated due to pressure force during the laser induced evaporation process. J. Laser Appl. 13(3) (2001)
B.S. Yilbas, S.J. Hyder, S.Z. Shuja, Flexural wave generation and stress analysis during laser evaporative heating of steel, in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 216, pp. 531–542, 2002
B.S. Yilbas, M. Faisal, S.Z. Shuja, A.F.M. Arif, Laser pulse heating of steel surface and flexural wave analysis. Opt. Lasers Eng. 37, 63–83 (2002)
B.S. Yilbas, S.J. Hyder, Laser pulse heating and flexural wave generation during treatment of metallic surfaces. J. Mater. Process. Technol. 141, 1–8 (2003)
B.S. Yilbas, J. Hyder, Flexural motion due to laser ablation: influence of force location on the flexural motion, in ImechE Proceedings Part C: Journal of Mechanical Engineering Science, vol. 218(12), pp. 1411–1420, 2004
B.S. Yilbas, J. Hyder, Influence of layers on flexural motion of multilayer assembly due to laser ablation process, in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 217, pp. 945–954, 2003
T. Al-Zaharnah, B.S. Yilbas, Effect of heat transfer on the flexural characteristics of cantilever plate heated at fixed end. J. Mech. 25, 1–8 (2009)
I.T. Alzaharnah, S. Al-Kaabi, B.S. Yilbas, Effect of temperature field on flexural wave characteristics of a bar resembling welding to rigid body. Adv. Mater. Res. 83–86, 1212–1219 (2010)
I.T. Alzaharnah, B.S. Yilbas, Investigation into flexural characteristics of a bar subjected to local heating: the effect of heat source location, in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 222, pp. 1355–1362, 2008
I.T. Alzaharnah, B.S. Yilbas, S.A. Al-Kaabi, Flexural characteristics of a laser welded cantilever plate: influence of speed of the heating source. Lasers Eng. 18, 337–350 (2008)
B.S. Yilbas, S.J. Hyder, Analysis of flexural wave due to laser heating pulse: two-layer assembly case, in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 216, pp. 1165–1174, 2002
S.J. Hyder, B.S. Yilbas, S.Z. Shuja, Flexural motion in laser evaporative heated cantilever workpiece: three-dimensional analysis. Opt. Quant. Electron. 35, 111–128 (2003)
S.J. Hyder, B.S. Yilbas, S.Z. Shuja, Laser induced flexural wave analysis: an aluminum element in steel substrate. J. Mater. Process. Technol. 136, 24–34 (2003)
D. Al-Anazi, M.S.J. Hashmi, B.S. Yilbas, M. Sunar, Three-point bend testing of HVOF AMDRY 9954 coating on Ti-6Al-4 V alloy. J. Mater. Process. Technol. 174(1–3), 204–210, 2006
D. Al-Anazi, M.S.J. Hashmi, B.S. Yilbas, HVOF thermally sprayed CoNiCrAlY coatings on Ti-6Al-4 V alloy: high cycle fatigue properties of coating, in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 221(4), pp. 647–654, 2007
D. Al-Anazi, M.S.J. Hashmi, B.S. Yilbas, M. Sunar, in HVOF Sprayed AMDRY 995 Powders onto Ti-6 Al-4 V Alloy: Tensile Properties. Conference on Advances in Material Processing Technology, AMPT06, Las Vegas, July 30–August 2, 2006
D. Al-Anazi, M.S.J. Hashmi, B.S. Yilbas, HVOF coating of AMDRY 9954 onto Ti-6Al-4 V alloy: fracture toughness measurement, in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 221(4), pp. 617–623, 2007
Y.A. Al-Shehri, M.S.J. Hashmi, B.S. Yilbas, HVOF coating of diamalloy 2002 and 4010 on carbon steel sheets: microstructure examination. Adv. Mater. Res. 264–265, 1482–1486, (2011) (AMPT 2009, Kuala Lumpur, Malaysia, 26–29 October 2009)
Y.A. Al-Shehri, M.S.J. Hashmi, B.S. Yilbas, in HVOF Coatings of Diamalloy 2002 and Diamalloy 4010 onto Steel: Tensile and Bending Response of Coatings. AMPT 2010, Advances in Materials and Processing Technologies Conference, 24–27 October 2010 in Paris, France. AIP Conference Proceedings, vol. 1315, pp. 1347–1352, 2010
B.S. Yilbas, and A.F.M. Arif, Residual stress analysis for HVOF diamalloy 1005 on Ti-6Al-4 V alloy. Surf. Coat. Technol. 202, 559–568 (2007)
A.F.M. Arif, B.S. Yilbas, Laser treatment of HVOF coating: modeling and measurement of residual stress in coating. J. Mater. Eng. Perform. 17(5), 644–650 (2008)
Z.Y. Taha-al, M.S.J. Hashmi, B.S. Yilbas, Laser treatment of HVOF coating: model study and characterization. J. Mech. Sci. Technol. 21, 1439–1444 (2007)
A. Al Askandarani, M.S.J. Hashmi, B.S. Yilbas, Coating produced by deposition of nanoparticles blended wires. Adv. Mater. Res. 264–265, 1476–1481 (2011) (AMPT 2009, Kuala Lumpur, Malaysia, 26–29 October 2009)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2014 The Author(s)
About this chapter
Cite this chapter
Yilbas, B.S., Al-Zaharnah, I., Sahin, A. (2014). Concluding Remarks. In: Flexural Testing of Weld Site and HVOF Coating Characteristics. Materials Forming, Machining and Tribology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-54977-9_4
Download citation
DOI: https://doi.org/10.1007/978-3-642-54977-9_4
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-54976-2
Online ISBN: 978-3-642-54977-9
eBook Packages: EngineeringEngineering (R0)