Advertisement

A Top-Down Optimization Methodology for SC Filter Circuit Design Using Varying Goal Specifications

  • Hugo Serra
  • Rui Santos-Tavares
  • Nuno Paulino
Part of the IFIP Advances in Information and Communication Technology book series (IFIPAICT, volume 423)

Abstract

The design of Switched-Capacitor (SC) filters can be an arduous process, which becomes even more complex when the high gain amplifier is replaced by a low gain amplifier or a voltage follower. This eliminates the virtual ground node, requiring the compensation of the parasitic capacitances during the design phase. This paper proposes an automatic procedure for the design of SC filters using low gain amplifiers, based on a Genetic Algorithm (GA) using hybrid cost functions with varying goal specifications. The cost function first uses equations to estimate the filter transfer function, the gain and settling-time of the amplifier and the RC time constants of the switches. This reduces the computation time, thus allowing the use of large populations to cover the entire design space. Once all specifications are met, the GA uses transient electrical simulations of the circuit in the cost functions, resulting in the accurate determination of the filter’s transfer function and allowing the accurate compensation of the parasitic capacitances, obtaining the final design solution within a reasonable computation time.

Keywords

Computer-aided design genetic algorithm filter design switchedcapacitor 

References

  1. 1.
    Perez, A.P., Maloberti, F.: Performance enhanced op-amp for 65nm CMOS technologies and below. In: IEEE Int. Symp. Circuits and Systems (ISCAS), pp. 201–204 (May 2012)Google Scholar
  2. 2.
    Serra, H., Paulino, N., Goes, J.: A switched-capacitor biquad using a simple quasi-unity gain amplifier. In: Proc. IEEE Int. Symp. Circuits Systems (ISCAS), pp. 1841–1844 (May 2013)Google Scholar
  3. 3.
    Santos-Tavares, R., Paulino, N., Goes, J.: Time-Domain Optimization of CMOS Amplifiers - Based on Distributed Genetic Algorithms. LAP LAMBERT Academic Publishing (2012)Google Scholar
  4. 4.
    Figueiredo, M., Santos-Tavares, R., Santin, E., Ferreira, J., Evans, G., Goes, J.: A two-stage fully differential inverter-based self-biased CMOS amplifier with high efficiency. IEEE Trans. Circuits Syst. I, Reg. Papers 58, 1591–1603 (2011)CrossRefMathSciNetGoogle Scholar
  5. 5.
    Santos-Tavares, R., Paulino, N., Goes, J., Oliveira, J.: Optimum sizing and compensation of two-stage CMOS amplifiers based on a time-domain approach. In: Proc. IEEE Int. Conf. on Electronics, Circuits Systems (ICECS), pp. 533–536 (December 2006)Google Scholar
  6. 6.
    Nenzi, P., Vogt, H.: Ngspice users manual version 25, http://ngspice.sourceforge.net/ (accessed October 8, 2013)
  7. 7.
    de Melo, J.L.A., Nowacki, B., Paulino, N., Goes, J.: Design methodology for sigma-delta modulators based on a genetic algorithm using hybrid cost functions. In: Proc. IEEE Int. Symp. Circuits Systems (ISCAS), pp. 301–304 (May 2012)Google Scholar

Copyright information

© IFIP International Federation for Information Processing 2014

Authors and Affiliations

  • Hugo Serra
    • 1
    • 2
  • Rui Santos-Tavares
    • 1
    • 2
  • Nuno Paulino
    • 1
    • 2
  1. 1.Centre for Technologies and Systems (CTS)UNINOVAPortugal
  2. 2.Dept. of Electrical Engineering (DEE)Universidade Nova de Lisboa (UNL)CaparicaPortugal

Personalised recommendations