Abstract
To capture equipment fault in real time and automate fault diagnosis, a pattern recognition method, based on data eigenvector and TCP transport protocol, was proposed to capture Water Quality Monitoring equipment’s fault information. Fault data eigenvector was designed after analyzing the equipment fault feature and capture strategy, structural pattern recognition strategy was confirmed and specific data frame was designed in response to the fault data eigenvector, by integrating the data frame design into the equipment’s communication protocol, data related to different fault compiled into fault data frames by transmitters or communication module of equipment’s different components, the remote sever captures equipment fault on transport via fault data frames according to the structural pattern recognition strategy. With 7 months of practical application in Taihu aquaculture project and research center of agricultural information technology, combining with historical fault data and contrast with artificial recognition result, the simulate experiment shows this method has higher response rate and process rate with a nice accurate.
Chapter PDF
References
Wu, K., Choudhury, D., Matsumoto, H.: Wireless Power Transmission, Technology, and Applications. In: Proceedings of The IEEE, vol. 101(6SI), pp. 1271–1275 (2013)
Xiaodan, P., et al.: Uplink transmission in the W-band (75-110 GHz) for hybrid optical fiber-wireless access networks. Microwave and Optical Technology Letters 55(5), 1033–1036 (2013)
Lakshmanan, S., Sivakumar, R.: Proteus: Multiflow Diversity Routing for Wireless Networks with Cooperative Transmissions. IEEE Transactions on Mobile Computing 12(6), 1146–1159 (2013)
Cheng, S.T., et al.: Hierarchical Distributed Source Coding Scheme and Optimal Transmission Scheduling for Wireless Sensor Networks. Wireless Personal Communications 70(2), 847–868 (2013)
Tahir, Y.H., et al.: Transmission of Visual Data over Wireless Fading Channel in Real-Time Systems Based on Superposition Coding Scheme. Arabian Journal for Science and Engineering 38(6), 1459–1469 (2013)
Chunlai, Y., et al.: Study on Wireless Energy and Data Transmission for Long-Range Projectile. IEEE Transactions on Plasma Science 41(5), 1370–1375 (2013)
Refaat, S.S., et al.: ANN-based for detection, diagnosis the bearing fault for three phase induction motors using current signal. In: 2013 IEEE International Conference on Industrial Technology (ICIT 2013), pp. 253–258 (2013)
Talebi, H.A., Khorasani, K.: A Neural Network-Based Multiplicative Actuator Fault Detection and Isolation of Nonlinear Systems. IEEE Transactions on Control Systems Technology 21(3), 842–851 (2013)
Jettanasen, C., Ngaopitakkul, A.: A novel probabilistic neural network-based algorithm for classifying internal fault in transformer windings. IEEJ Transactions on Electrical and Electronic Engineering 8(2), 123–131 (2013)
Prieto, M.D., et al.: Bearing Fault Detection by a Novel Condition-Monitoring Scheme Based on Statistical-Time Features and Neural Networks. IEEE Transactions on Industrial Electronics 60(8), 3398–3407 (2013)
Li, B., et al.: Applying the fuzzy lattice neurocomputing (FLN) classifier model to gear fault diagnosis. Neural Computing & Applications 22(3-4SI), 627–636 (2013)
Liu, H., et al.: Adaptive neuro-fuzzy inference system based faulty sensor monitoring of indoor air quality in a subway station. Korean Journal of Chemical Engineering 30(3), 528–539 (2013)
Hashemi, M., Safizadeh, M.S.: Design of a fuzzy model based on vibration signal analysis to auto-detect the gear faults. Industrial Lubrication and Tribology 65(3), 194–201 (2013)
Keskes, H., Braham, A., Lachiri, Z.: Broken rotor bar diagnosis in induction machines through stationary wavelet packet transform and multiclass wavelet SVM. Electric Power Systems Research 97, 151–157 (2013)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 IFIP International Federation for Information Processing
About this paper
Cite this paper
Yang, H., Li, D., Liang, Y. (2014). A Fault Data Capture Method for Water Quality Monitoring Equipment Based on Structural Pattern Recognition. In: Li, D., Chen, Y. (eds) Computer and Computing Technologies in Agriculture VII. CCTA 2013. IFIP Advances in Information and Communication Technology, vol 420. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-54341-8_44
Download citation
DOI: https://doi.org/10.1007/978-3-642-54341-8_44
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-54340-1
Online ISBN: 978-3-642-54341-8
eBook Packages: Computer ScienceComputer Science (R0)