Abstract
Pulsed thermography is a nondestructive evaluation method, which has been qualitatively and quantitatively applied for different classes of materials to detect variety of defects. In this study, one-dimensional theoretical model of transient heat conduction under an instantaneous plane source is described for its application in the detection of honeycomb structures. Three kinds of honeycomb structures, including glass fiber-reinforced plastics (GFRP) honeycomb, carbon fiber-reinforced plastics (CFRP), and aluminum (Al) honeycombs, were used to demonstrate the detection ability, and the defects include most typical defects in honeycomb structures, such as disbonds, fluid ingress, and excessive adhesive. The image sequences were used for defect detection, and temperature decay analysis was helpful for the characterization of defect types.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Avdelidis NP, Hawtin BC, Almond DP (2003) Transient thermography in the assessment of defects of aircraft composites. NDT&E Int 36:433–439
Maldague X (1993) Nondestructive evaluation of materials by infrared thermography. Springer, New York
Zeng Z, Li C, Tao N, Feng L, Zhang C (2012) Depth prediction of non-air interface defects in pulsed thermography. NDT&E Int 48:39–45
Zeng Z, Zhou J, Tao N, Feng L, Zhang C (2012) Absolute peak slope time based thickness measurement using pulsed thermography. Infrared Phys Technol 55(2–3):200–204
Zeng Z, Tao N, Feng L, Zhang C (2012) Specific value based depth prediction in pulsed thermography. J Appl Phys 112:023112
Sun JG (2006) Analysis of pulsed thermography methods for defect depth prediction. J Heat Transfer 128(4):329
Almond DP, Peng W (2001) Thermal imaging of composites. J Microsc 201:163–170
Shepard SM (2007) Thermography of composites, Material evaluation. July, 690–696
Han X, Favro LD, Thomas RL (1998) Thermal wave NDI of disbonds and corrosion in aircraft. In: The second joint NASA/FAA/DOD Conference on Aging Aircraft, NASA/CP-1999-208982, Part 1, pp 265–274
Maldague X, Marinetti S (1996) Pulse phase infrared thermography. J Appl Phys 79:2694–2698
Vavilov VP, Klimov AG, Shiryaev VV (2002) Active thermal detection of water in cellular aircraft structures. Russ J Nondestr Test 38:927–936
Chen D, Zeng Z, Tao N, Zhang C, Zhang Z Quantitative study of water ingress in pulsed thermography
Zhi Z, Ning T, Lichun F, Cunlin Z Hidden heterogeneous materials recognition in pulsed thermography. Review of Progress in Quantitative Nondestructive Evaluation 31:705–712
Acknowledgments
This work was supported in part by the Joint Funds of the National Natural Science Foundation of China (Nos. U1233120 and 61079020).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Zeng, Z., Li, X., Li, C., Ye, Z., Zhang, C., Shen, J. (2014). Honeycomb Structure Detection Using Pulsed Thermography. In: Wang, J. (eds) Proceedings of the First Symposium on Aviation Maintenance and Management-Volume II. Lecture Notes in Electrical Engineering, vol 297. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-54233-6_74
Download citation
DOI: https://doi.org/10.1007/978-3-642-54233-6_74
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-54232-9
Online ISBN: 978-3-642-54233-6
eBook Packages: EngineeringEngineering (R0)