Abstract
The impact of the optical constants real properties on general problems of coating design is discussed. Emphasis is given on material choice for both normal and oblique incidence spectral targets, and on general feasibility considerations by means of computational manufacturing runs for different available deposition process monitoring approaches. As a major example, the impact of optical constants and their reproducibility on the performance of a broadband antireflection coating is discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
R.W. Klopfenstein, A transmission line taper of improved design. Proc. IRE 44(1), 31–35 (1956)
A.V. Tikhonravov, J.A. Dobrowolski, Quasi-optimal synthesis for antireflection coatings: a new method. Appl. Opt. 32, 4265–4275 (1993)
E.B. Grann, M.G. Moharam, D.A. Pommet, Optimal design for antireflective tapered two-dimensional sub wavelength grating structures. J. Opt. Soc. Am. A 12, 333–339 (1995)
J.A. Dobrowolski, A.V. Tikhonravov, M.K. Trubetskov, B.T. Sullivan, P.G. Verly, Optimal single-band normal-incidence antireflection coatings. Appl. Opt. 35, 644–658 (1996)
R. Willey, Refined criteria for estimating limits of broad-band AR coatings. Proc. SPIE 5250, 393–399 (2004)
J.A. Dobrowolski, Antireflection coatings: key optical components, Proc. SPIE. 5963(22005), 596303-1–596303-12 (2005)
T.V. Amotchkina, Empirical expression for the minimum residual reflectance of normal- and oblique-incidence antireflection coatings. Appl. Opt. 47, 3109–3113 (2008)
S. Wilbrandt, O. Stenzel, N. Kaiser, All-oxide broadband antireflection coatings by plasma ion assisted deposition: design, simulation, manufacturing and re-optimization. Opt. Express 18, 19732–19742 (2010)
H.A. Macleod, Thin-Film Optical Filters, 4th edn. (CRC Press, Boca Raton, 2010)
A. Thelen, Design of Optical Interference Coatings (McGraw-Hill Book Company, New York, 1989)
S.A. Furman, A.V. Tikhonravov, Basics of Optics of Multilayer System (Edition Frontieres, Paris, 1992)
P.W. Baumeister, Optical Coating Technology (SPIE Press, Bellingham, 2004)
R.R. Willey, Practical Design and Production of Optical Thin Films (Marcel Dekker Inc., New York, 2002)
A.V. Tikhonravov, in Optical Interference Coatings, ed. by N. Kaiser, H.K. Pulker (Springer-Verlag, Berlin, 2003)
A.V. Tikhonravov, M.K. Trubetskov, Modern design tools and a new paradigm in optical coating design. Appl. Opt. 51, 7319–7332 (2012)
A.V. Tikhonravov, M.K. Trubetskov, Computational manufacturing as a bridge between design and production. Appl. Opt. 44, 6877–6884 (2005)
A.V. Tikhonravov, Some theoretical aspects of thin film optics and their applications. Appl. Opt. 32, 5417–5426 (1993)
Advanced thin film optical coatings: evaluation and design. Lecture in materials of the 17-th European optilayer workshop, optical coatings for modern applications (Jena, Germany, 11–13 Mar 2013)
M. Friz, F. Waibel, Optical Interference Coatings, ed. by N. Kaiser, H.K. Pulker (Springer-Verlag, Berlin, 2003), p. 105
M. Mero, J. Liu, W. Rudolph, D. Ristau, K. Starke, Scaling laws of femtosecond laser pulse induced breakdown in oxide films. Phys. Rev. B 71, 115109-1–115109-1 (2005)
B. Mangote, L. Gallais, M. Commandré, M. Mende, L. Jensen, H. Ehlers, M. Jupé, D. Ristau, A. Melninkaitis, J. Mirauskas, V. Sirutkaitis, S. Kičas, T. Tolenis, R. Drazdys, Femtosecond laser damage resistance of oxide and mixture oxide optical coatings. Opt. Lett. 37, 1478–1480 (2012)
X. Fu, M. Commandré, L. Gallais, M. Mende, H. Ehlers, D. Ristau, Laser-induced Damage in scandium, hafnium, aluminum oxides composites with silica in the infrared, Optical Interference Coatings Technical Digest © OSA 2013, paper FB.3 (2013)
B.T. Sullivan, J.A. Dobrowolski, Deposition error compensation for optical multilayer coatings: I. Theor. descr. Appl. Opt. 31, 3821–3835 (1992)
C. Holm, Optical thin film production with continuous reoptimization of layer thicknesses. Appl. Opt. 18, 1978–1982 (1979)
L. Li, Y. Yen, Wideband monitoring and measurement system for optical coatings. Appl. Opt. 28, 2889–2894 (1989)
J.A. Dobrowolski, Modern computational methods for optical thin film systems. Thin Solid Films 34, 313–321 (1976)
K. Friedrich, S. Wilbrandt, O. Stenzel, N. Kaiser, K.H. Hoffmann, Computational manufacturing of optical interference coatings: method, simulation results, and comparison with experiment. Appl. Opt. 49, 3150–3162 (2010)
A.V. Tikhonravov, M.K. Trubetskov, T.V. Amotchkina, V. Pervak, Estimations of production yields for selection of a practical optimal optical coating design. Appl. Opt. 50, C141–C147 (2011)
M. Held, S. Wilbrandt, O. Stenzel, N. Kaiser, A. Tünnermann, Practical optimization of a coating deposition process by application of hybrid monitoring strategies in an in-dustrial production environment. Adv. Opt. Technol. 2, 189–196 (2013)
W.P. Theoni, Deposition of optical coatings: process control and automation. Thin Solid Films 88, 385–397 (1982)
A.V. Tikhonravov, M.K. Trubetskov, T.V. Amotchkina, Investigation of the error self-compensation effect associated with broadband optical monitoring. Appl. Opt. 50, C111–C116 (2011)
A.V. Tikhonravov, M.K. Trubetskov, T.V. Amotchkina, Investigation of the effect of accumulation of thickness errors in optical coating production by broadband optical monitoring. Appl. Opt. 45, 7026–7034 (2006)
Presentations given at the 17-th European OptiLayer Workshop, Optical Coatings for Modern Applications, (Jena, Germany, 11–13 Mar 2013)
B.T. Sullivan, G. Carlow, An overview of optical monitoring techniques, in Optical Interference Coatings Topical Meeting, 2010 OSA Technical Digest, paper TuC1 (Optical Society of America, 2010)
H. Ehlers, S. Schlichting, C. Schmitz, D. Ristau, From independent thickness monitoring to adaptive manufacturing: advanced deposition control of complex optical coatings. Proc. SPIE 8168, 81681 (2011)
H. Ehlers, S. Schlichting, C. Schmitz, D. Ristau, Hybrid Process Control for Precision Optics Enhanced by Computational Manufacturing, in Optical Interference Coatings Topical Meeting, 2010 OSA Technical Digest, paper TuC6 (Optical Society of America, 2010)
O. Züger, Dielectric Filter Production with in situ Broadband Optical Monitoring, in Optical Interference Coatings Topical Meeting, 2010 OSA Technical Digest, paper TuC4 (Optical Society of America, 2010)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Stenzel, O. (2014). Material Aspects in Coating Design. In: Optical Coatings. Springer Series in Surface Sciences, vol 54. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-54063-9_6
Download citation
DOI: https://doi.org/10.1007/978-3-642-54063-9_6
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-54062-2
Online ISBN: 978-3-642-54063-9
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)