Zusammenfassung
Es wäre verführerisch, an dieser Stelle die bereits beschrittenen Wege beim Einsatz der PE-Harze durch ein Feuerwerk in Wort und Bild zu illuminieren. Die Einsatzmöglichkeiten sind derart mannigfaltig, daß selbst eine lange Artikelliste morgen bereits unvollständig wäre. Wichtiger erschien es, durch Literaturangaben eigene Nachforschungen auf Spezialgebieten, besonders aber das Studium ernsthafter Referate oder gutbebilderter Aufsätze zu erleichtern. Einige wenige, besonders gute und originelle Lösungen sind zur Illustration beigefügt, aber auch Beispiele von nicht empfehlenswerten Fabrikaten.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Literatur zu
Trans. Soc. Nay. Arch. 60 595 (1952), Kleinboote.
Mod. Plastics 29 129 (Okt. 1951), 4 Wege zur Bootsfabrikation.
Mod. Plastics 30 103 (Nov. 1952), Bootsherstellung mit Photos.
Mod. Plastics 30 124 (Nov. 1952), Schiffsmodelle für Bassinprüfung.
Mod. Plastics 32 110 (Juni 1955), Speedboot nach Vorformmethode.
Mod. Plastics 27, 103 (Sept. 1949), Herstellung eines Dinghi.
Brit. Plast. 26 172 (1953), Herstellung eines Dinghi.
Brit. Plast. 27 154 (1954), Herstellung eines Dinghi.
Brit. Plast. 27, 21 (1954), Herstellung eines Dinghi.
Brit. Plast. 27, 246 (1954).
Brit. Plast. 27, 363 (1954).
Brit. Plast. 28, 412 (1955).
White, F. J.: S. 209 in MORGAN, zitiert S. 497.
Alfers, J. B. (Bureau of ships, Navy) : 6. Techn. Conf. (1951) Sect. 9.
Mills (US. Naval) : 7. Techn. Conf. (1952) Sect. 13 (16 Bilder).
Marshall, K. T. (US. Transportation Corps) : 8. Techn. Conf. (1953) Sect. 10.
Brush, C. E. (US. Coast Gard) : 8. Techn. Conf. (1953) Sect. 12 (8 Bilder).
Graner, W. R. (Bureau of ships, Navy) : 8. Techn. Conf. (1953) Sect. 16.
Alfers, J. B., u. W. R. Graner (Bureau of ships) : 9. Techn. Conf. (1954) Sect. 1C.
Scott, J. M.: 10. Techn. Conf. (1955) Sect. 17.
Mod. Plastics 28, 92 (Aug. 1951), Segelboot.
Mat. a. Meth. 40, 111 (Nr. 6 1954), 17 m-Schiff.
Alfers, J. B., u. a.: The Boating Industrie, Aug. 1954.
Brit. Plast. 28, 6 (1955), Schleppkahn 17 m lang, 9 t Gewicht.
Brit. Plast. 27, 154 (1954), 15 m-Boot, 10 Abbildungen.
Brit. Plast. 28, 168 (1955), 18 m-Boot, 2 Abbildungen.
US. P. 2 617126 (1 Anspruch, 7 Zitate).
Kunststoffe 44, 304 (1954).
Mod. Plastics 33, 104 (März 1956), 17 Abb.
Premo, E. J.: 9. Techn. Conf. (1954) Sect. 15, 140 Abbildungen.
Mod. Plastics 31, 83 (Dez. 1953).
Mod. Plastics 32, 115 (Aug. 1954).
Bulletin 212, Soc. of Automative Eng. (1954) New York.
Harbert, G. C. (Kaiser-Frazer) : 8. Techn. Conf. (1953) Sect. 8 L.
Levitt, S. : 10. Techn. Conf. (1955) Sect. 18A, 4 Photos.
Lunn, J. : 10. Techn. Conf. (1955) Sect. 18 B.
Pfeyl, J.: Automobil-Mechaniker (Schweiz) 6–1–2 (1954).
„Karosserie- und Fahrzeugbau“ 1955, S. 118.
O’keefe, P.: Mat. a. Meth. 35, 109 (April 1952).
DB. P. Anmneldg. 38 1, A 18 556 (Autounion) v. 7. 8. 1953, aufgelegt 18. 5. 1955. „Schichtpreßstoffe für Karosserien.“
Plastics 20, 219, 338 (1955), 5 Abbildungen.
Brit. Plat. 28, 10 (1955), 9 Abbildungen.
Brit. Plast. 28, 402 (1955).
The Motor Cycle, 2. März 1950.
Mod. Plastics 29, 76 (Juni 1952).
8. Techn. Conf. (1953) Sect. 22.
Brit. Plast. 25, 262 (1952).
Brit. Plat. 28, 402 (1955), 9 Abbildungen.
Mod. Plastics 31, 185 (Okt. 1953).
Brit. Plast. 27, 211 (1954), 3 Typen.
Kunststoffe 45, 68 (1955).
Brit. Plast. 26, 101 (1953), Cadillac.
Brit. Plast. 27, 387 (1954).
Brit. Plast. 27, 425 (1954).
Morgan, zitiert S. 497, dort S. 208.
Kunststoff-Rdsch. 2, 16 (1955), 6 Abbildungen.
Kunststoffe 42, 450 (1952).
Brit. Plast. 27, 160 (1954), 2 Abbildungen.
10. Techn. Conf. (1955) Sect. 18A.
Plastics 19, 206 (1954).
Brit. Plast. 24, 415 (1951).
Brit. Plast. 26, 20 (1953).
Brit. Plast. 26, 376 (1953).
Brit. Plast. 26, 450 (1953).
Brit. Plast. 27, 211 (1954).
Aircraft Production 13, 281 (1951).
Aircraft Production 13, 134 (1951).
Aircraft Production 13, 170 (1951).
Aircraft Production 15, 146 (1953).
Aircraft Production 15, 203 (1953).
Automobile Engr. 43, 541 (1953).
Automobile Engr. 44, 67 (1954).
Mod. Plastics 28, 96 (April 1952).
Mod. Plastics 30, 99 (Oktober 1953).
Mod. Plastics 30, 75 (Febr. 1953).
Mod. Plastics 31, 83 (Dez. 1953)
Silman, H.: Plastics Progress 1955, London, S. 361.
Mod. Plastics 33, 89 (März 1956) .
Coffin, J. G.: Laboratory results vs. serviceability for reinforced plastic in automobiles. 11. Techn. Conf. (1956) Sect. 6B.
Wiese, R. L.: Molding of large fiber glass reinforced plastic parts by the use of matched dies. 11. Techn. Conf. (1956) Sect. 10C.
Brit. Plast. 28, 6 (1955).
Austr. Plast. 8, 33 (Okt. 1953).
Hersteller in Deutschland : Sportex, Ulm.
Brit. Plast. 28, 7 (1955).
US. P. 2 716246 v. 30. 8. 1955 (9 Ansprüche, 9 Zitate).
Mod. Plastics 33, 112 (Nov. 1955), 1 Abbildung.
Brit. Plast. 27, 417 (1954).
Mod. Plastics 31, 96 (Febr. 1954).
Brit. Plast. 26, 320 (1953).
Mod. Plastics 23, 112 (Nr. 12, 1946).
Mod. Plastics 32, 116 (Oktober 1954).
Fram, P., u. a.: Ind. Engng. Chem. 46, 393 (1954).
Fishbein, M., u. a.: Report Na. V Am-21 223 an d. Committee for Artificia I Limbs, U.S. Army (1947).
Hersteller in Deutschland (s. Abb. 167).
Mod. Plastics 33, 99 (Sept. 1955).
Mod. Plastics 31, 84 (Febr. 1954).
Mod. Plastics 30, 96 (Febr. 1953).
Brucker, M. : 8. Techn. Conf. (1953) Sect. 8C.
Eppinger, J. P. : 8. Techn. Conf. (1953) Sect. 8D.
Mod. Plastics 27, 67 u. 147 (Aug. 1950).
Mod. Plastics 33, 3, 104 (1955).
10. Techn. Conf. (1955) Sect. 20.
Mod. Plastics 26, 77 (Febr. 1949).
Norberg, E. G. : 8. Techn. Conf. (1953) Sect. 8F.
Mod. Plastics 33, 2, 106 (1955), 10 Abbildungen.
6. Techn. Conf. (1951) Sect. 3.
10. Techn. Conf. (1955) Sect. 19.
10. Techn. Conf. (1955) Sect. 19.
Mod. Plastics 32, 102 (Okt. 1954).
Mod. Plastics 30, 82 (März 1952).
Brit. Plast. 27, 417 (1954).
Mod. Plastics 30, 82 (März 1953).
Mod. Plastics 32, 102 (Okt. 1954).
10. Techn. Conf. (1955) Sect. 21.
8. Techn. Conf. (1953) Sect. 8H.
6. Techn. Conf. (1951) Sect. 5.
10. Techn. Conf. (1955) Sect. 19.
10. Techn. Conf. (1955) Sect. 21.
Mod. Plastics 30, 88 (Febr. 1953).
Mod. Plastics 28, 89 (Dez. 1950).
8. Techn. Conf. (1953) Sect. 8H und 10.
Mod. Plastics 28, 74 (März 1951).
Ind. Engng. Chem. 33, 97 (1955)
Mod. Plastics 29, 88 (Juni 1952).
Mod. Plastics 32, 55 (Juli 1955).
US. P. 2 689 559 (21 Sept. 1954) (9 Ansprüche, 6 Zitate).
Canad. P. 491106.
Mod. Plastics 29, 103 (Okt. 1951).
Kunststoffe 44, 459 (1954).
Electr. Manufact. 54, 94 (Aug. 1954).
Lieferant : Dr. Deisting & Co., Kierspe.
Mod. Plastics 33, 228 (April 1956).
Kunststoffe 46, 157 (1956).
A. Plastics in Building, Building Research Institute, Washington DC. B. Saechtling, H. J.: Kunststoffe im Bauwesen. Düsseldorf 1955.
Mod. Plastics 32, 88 (Febr. 1955).
Waidelich, A. T. : siehe oben unter A, S. 51.
Kunststoffe 44, 66 (1954).
Mod. Plastics 33, 98 (2, 1955). Kuppelbau von 16,8 m Durchmesser und 11,7 m Höhe wurde in 288 Stunden aufgestellt
Flugzeughalle : Mod. Plastics 30, 71 (Jan. 1953).
Dietz, G. H.: siehe oben unter
A, S. 11.
Aluminium 31, 616 (1955).
Architectural Record Juni 1955 S. 157 und Nov. 1955 S. 235 ; Chem. & Eng. News, Okt. 1955 S. 4616.
Lieferanten u. a.: Wagner, Andernach, — Ahlmoplast, Rendsburg, — Ohler Eisenwerk, Plettenberg i. Westf., — Rheinische Polyester Ges. m. b. H., Mannheim.
Mod. Plastics 29, 174 (Juni 1952).
Mod. Plastics 28, 87 (April 1951).
Finger, J. S.: 10. Techn. Conf. (1955) Sect. 12.
Mod. Plastics 32, 100 (Nov. 1954).
Mod. Plastics 33, 4, 192 (1955).
Plast. Ind. 11, 27 (Okt. 1953).
Mod. Plastics 33, 192 (Dez. 1955).
Finger, J. S.: 10. Techn. Conf. (1955) Sect. 12, S. 7. Eingehende Diskussion über die Eigenschaften verschiedener Farbgebungen der PE-Platten.
Mod. Plastics 32, 92 (Febr. 1955).
Mod. Plastics 33, 188 (Dez. 1955).
Mod. Plastics 33, 202 (Nov. 1955). Nissenhütten für Radarstationen.
Kunststoffe 42, 450 (1952).
Brit. Plast. 25, 201 (1952), siehe auch oben unter A, S. 51.
Chem. Trade J. 133, 75 (1953).
Mod. Plastics 32, 100 (Juni 1955).
Brit. Plast. 26, 247 (1953).
Mod. Plastics 32, 101 (Juni 1955).
Mod. Plastics 32, 91 (Febr. 1955).
Mod. Plastics 30, 162 (Dez. 1952).
Mod. Plastics 29, 128 (März 1952).
Mod. Plastics 33, 98 (Nov. 1955).
Angas, W. M.: Kunststoffe 46, 71 (1956).
Brit. Plast. 29, 27 (1955).
Shaw, F. B. : 10. Techn. Conf. (1955) Sect. 15A, viele Abbildungen.
Landeck, L. W. (Westinghouse) : 10. Techn. Conf. (1955) Sect. 15 B, Abbildungen von sehr vielen Einzelteilen.
Mod. Plastics 31, 82 (Mai 1955).
8. Techn. Conf. (1953) Sect. 21.
8. Techn. Conf. (1953) Sect. 21.
Mod. Plastics 31, 104 (Juli 1954).
Yarm, S. D., u. a.: Mod. Plastics 31, 104 (Juli 1954).
Skow, N. A.: 1Mechan. Engng. 75, 709 (Sept. 1953).
Electr. Manufact. 54, 94 (Aug. 1954).
8. Techn. Conf. (1953) Sect. 8 J, 6 Abbildungen.
Braham, W. E. : 8. Techn. Conf. (1953) Sect. 27 G.
Curch, M. G.: Plastics 20, 12 422 (1955).
Curch, M. G.: Brit. Plast. 28, 12, 495 (1955).
Ramke, W. G.: 8. Techn. Conf. (1953) Sect. 11.
Meßmethoden und Forderungen: Military Specification C 7439 A (USA F). Siehe S.497.
Ind. Engng. Chem. 38, 590 (1946).
Morgan: zitiert S. 497, dort S. 151.
Aircraft Production 13, 281 (1951).
Plastics Progress 1951, London: Illiffe & Sons, S. 215.
Aircraft Production 15, 203 (1953).
Aircraft Production 15, 146 (1953).
Steele, R. C.: Mod. Plastics 31, 101 (Febr. 1954).
Latham, M. E.: 10. Techn. Conf. (1955) Sect. 1.
Matlock, R. W.: 10. Techn. Conf. (1955) Sect. 2.
Rosenbaum, H. H.: 10. Techn. Conf. (1955) Sect. 3.
Hatch, D. M.: 10. Techn. Conf. (1955) Sect. 4.
Brit. Plast. 28, 480 (1955) (10 Abbildungen).
Zeasman, J. M.: 10. Techn. Conf. (1955) Sect. 5.
Spencer, H. G.: 10. Techn. Conf. (1955) Sect. 27.
Wahl, N. E.: 10. Techn. Conf. (1955) Sect. 28.
Phillips, L. N.: Plast. Inst. Trans. J. 23, 54 (1955) (7 Tabellen).
Aircraft Production 15, 198 (1953).
Aircraft Production 15, 234 (1953).
Engineering 175, 730 (1953).
Plastics 18, 207 (1953).
Brit. Plast. 26, 214 (1953).
Mod. Plastics 32, 100 (Febr. 1955).
Mod. Plastics 31, 181 (Dez. 1953).
US. P. 2 729 268 (6 Ansprüche, 3 Zitate).
Mod. Plastics 33, 4, 146 (1955) (11 Abbildungen, 1 Tabelle) behandelt Druckbehälter für die Chemiepraxis bis 600 atü und deren Messung mit Dehnungsmeßstreifen.
Raun, M. A.: Mod. Plastics 33, 146 (Dez. 1955).
Brit. Plast. 27, 398 (1954).
Brit. Plast. 28, 60 (1955).
Mod. Plastics 33, 96 (Febr. 1956).
Mod. Plastics 33, 2, 126 (1955), 9 Abbildungen.
Brit. Plast. 27, 238 (1954), 14 Abbildungen.
Brit. Plast. 24, 415 (1951), 16 Abbildungen.
US. P. 2 484 141 (4 Ansprüche, 11 Zitate).
Stevens, J. M.: 9. Techn. Conf. (1954) Sect. 1 H.
Wahl, N. E.: 6. Techn. Conf. (1951) Sect. 17.
Povey, H.: Aircraft Production 13, 170 (1951).
Mat. a. Meth. 39, 7 (1954).
Brit. Plast. 20, 98 (1948).
Brit. Plast. 21, 535 (1949).
Brit. Plast. 24, 334 (1951).
Brit. Plast. 27, 302 (1954).
Plastics Progress, London 1951, S. 215ff.
Mod. Plastics 28, 73 (1951).
Mod. Plastics 32, 87 u. 100 (Dez. 1954).
Flight, März 1947.
Mod. Plastics 30, 71 (Jan. 1953).
Mod. Plastics 30, 116 (Aug. 1953).
Brit. Plast. 27, 238 (1954).
Brit. Plast. 26, 171 (1953). Ausschäumen von mehrschichtigen Hauben.
Engineering 175, 730 (5. Juni 1953).
Mod. Plastics 30, 73 (Juli 1953).
Mod. Plastics 30, 88 (Aug. 1953).
Mat. a. Meth. 38, 100/01 (Aug. 1953).
Aeronaut. Engng. 12, 37/45 (Sept. 1953).
Mod. Plastics 31, 92/96 (Sept. 1953).
Flight 64, 707 (27. Nov. 1953).
Aviation Week 59, 58/60 (7. Dez. 1953).
Forest Lab. Reports (s. S. 387), vor allem Nr. 1803, 1803A, 1807, 1811, 1811A, 1814, 1818 bis 1825.
Parrish, N. C. Anl. Ind. 108, 76 (1. März 1953). Analyse der Möglichkeiten von GUP im Flugzeug.
ANC-17 und ANC-23 „Panel on Plastics“, Airforce-Navy-Civil Aircraft Design Criteria. Superintendent of Documents, US Printing Office, Washington 25 DC.
Fink, W. R. : Field assembly of reinforced plastics jettisonable fuel tanks. 11. Techn. Conf. (1956) Sect. 17 D.
Malt, N. T.: Reiseflugzeug mit Beplankung aus GUP. Ind. Rev. Africa (Nov. 1955) S. 3–13, referiert in Kunststoffe 46, 147 (1956).
Schliekelmann, R. J.: GUP im Flugzeugbau. Plastica 9, 10 (1956), 11 Abb.
Campbell, J. B.: Asbestverstärkte Niederdruckschichtstoffe. Mat. a. Meth. 43, 103–107 (1956), 5 Abb., 6 Tab., 11 Zitate.
Miller, K. D., u. a.: Für und Wider von Kunststoffen bei Raketen. Mat. a. Meth. 43, 173 (1956).
Patton, W. G.: Iron Age, 6. Aug. 1953.
Plastics Progress S. 162, London 1953.
Brit. Plast. 27, 206 (1954), Bohrlehren.
Lyijynen, F.: 9. Techn. Conf. (1954) Sect. 18.
Walkey, G. J.: 10. Techn. Conf. (1955) Sect. 8A, 12 Bilder.
Hastings, N. M.: 10. Techn. Conf. (1955) Sect. 8C.
Mod. Plastics 30, 98 (Sept. 1952).
Voss, R. H.: 10. Techn. Conf. (1955) Sect. 8D, 6 Bilder.
Rice, G. M.: 10. Techn. Conf. (1955) Sect. 8E, 26 Bilder.
Mod. Plastics 31, 104 (Jan. 1954).
Stevens, H.: Mod. Plastics Encycl. 1955, S. 638.
Brenner, W., u. a.: Plast. Technolog. 1, 20 (1955).
Riley, M. W., u. a.: Plastics Tooling, New York : Reinhold 1955, 119 Seiten. Gut bebilderte Herstellungsvorschläge, Literaturangaben.
Riley, M. W. : Mat. a. Meth. 40, Nr. 6, 106 (1954) .
Riley, M. W. : Mat. a. Meth. 41, Nr. 1, 89 (1953).
Patton, W. G.: Iron Age 173, 180 (22. April 1954) .
Firmenprospekte der Rezolin-Inc., Los Angeles, Calif., USA.
Firmenprospekte der Marblette, Long Island City, N.Y., USA.
Firmenprospekte der Ren-Plastics Inc., Lansing, Mich.
Lyijynen, F. (Chrysler) : Rubber a. Plast. Age 36, 213 (1955). Erfahrungen mit Phenol-, Polyester- und Epoxywerkzeugen mit und ohne Glasgewebe. Bei PE-Harzen stellt man die Werkzeuge mit 2 kg/cm2 Druck her, um im Gelzustand zu komprimieren und die Schrumpfung zu verringern.
Dudley, R. L.: Tool Eng. 33, 47 (Aug. 1954).
Carr, R., u. a.: Tool. Eng. 33 (Nov. 1954).
Merry, A. A. (United Aircraft) : Iron Age 173, 159 (März 1954).
Morowicz, R.: Plast. Techn. 1, 8, 493 (1955). 5 Abbildungen. Beschreibung der Herstellung einfacher Werkzeuge.
Aviation Week 40 (März 1954).
Sokol, B.: Tooling and Production, Aug. 1955, Epoxy-Ziehwerkzeuge.
Meyerhans, K.: Plastics 20, 27 (Jan. 1955). Bebilderte Beschreibung der Herstellung von Epoxywerkzeugen.
Meyerhans, K.: Kunststoffe 43, 387 (1953).
Meyerhans, K.: Kunststoffe 45, 443 (1955).
Gilbert, F. L.: Sheet Metal Ind. S. 245 (April 1955).
SPI-Plastics Engen. Handbook, New York: Reinhold 1954, S. 225.
Brit. Plast. 26, 28 (1953), Ziehwerkzeug aus Phenolharz.
Brit. Plast. 28, 7 (1955).
Brit. Plast. 28, 101 (1955), Flugzeugindustrie.
Mod. Plastics 30, 107 (Juni 1953), mit. Abbildungen.
Mod. Plastics 31, 109 (Sept. 1953), mit Abbildungen.
Mod. Plastics 32, 85 (Sept. 1954), Herstellung Phenolharzwerkzeug, sehr eingehende Beschreibung.
Mod. Plastics 32, 113 (März 1955).
Mod. Plastics 32, 130 (Aug. 1955), Herstellung Epoxyharzwerkzeug.
Delmonte, J.: Mat. a. Meth. S. 93 (Aug. 1954).
Rosenbaum, H. H.: Ann. Mach. 98, 121 (März 1954), Flugzeug.
Mahon, D. S.: Kunststoffe 44, 319 (1954).
Dugteren, J. O. W. van : Plastica 7, 276 (1954) ; — Materie plast. 20, 277 (1954).
Diskussionsbemerkungen auf der Tooling Session der 10. Techn. Conf. (1955) Sect. 8.
Lyijynen, F.: 9. Techn. Conf. (1954) Sect. 18. (6 Bilder).
Voss, R. H.: 10. Techn. Conf. (1955) Sect. 8D
Rice, G. M.: 10. Techn. Conf. (1955) Sect. 8E.
Mod. Plastics 33, 97 (Okt. 1955).
Plastics 19, 118 (April 1954).
Mod. Plastics 33, 140 (Sept. 1955).
US. P. 2 138 882 (1938).
US. P. 2284715 (1942).
Mod. Plastics 29 81 (Nov. 1951).
Mod. Plastics 31 185 (Okt. 1953).
10. Techn. Conf. (1955) Sect. 1K.
Ind. de plast. mod. 7, 1 (Nr. 3, 1955).
Alfers, J. B.: 6. Techn. Conf. (1951) Sect. 9.
Mills, J. F.: 7. Techn. Conf. (1952) Sect. 13.
Graner, W. R.: 8. Techn. Conf. (1953) Sect. 16.
Fried, N.: 9. Techn. Conf. (1954) Sect. 1F.
Graner, W. R.: 9. Techn. Conf. (1954) Sect. 1 G.
Stevens, J. M.: 9. Techn. Conf. (1954) Sect. 1 H.
Graner, W. R. : 10. Techn. Conf. (1955) Sect. 7H.
STEVENS, J. M.: 10. Techn. Conf. (1955) Sect. 7 J.
Barnet, F. R.: 7. Techn. Conf. (1952) Sect. 12.
Erickson, P.: 8. Techn. Conf. (1953) Sect. 14.
Case, J. W.: 9. Techn. Conf. (1954) Sect. 1A.
Erickson, P. : 10. Techn. Conf. (1955) Sect. 7A.
Barnet, F. R.: 10. Techn. Conf. (1955) Sect. 7B.
Case, J. W.: 10. Techn. Conf. (1955) Sect. 7 G.
Brush, C. E.: 8. Techn. Conf. (1953) Sect. 12.
Temple, R.: 6. Techn. Conf. (1951) Sect. 8.
Temple, R.: 7. Techn. Conf. (1952) Sect. 8.
Rosato, D.: 7. Techn. Conf. (1952) Sect. 10.
Stevens, J. M.: 8. Techn. Conf. (1953) Sect. 15.
Rosato, D.: 9. Techn. Conf. (1954) Sect. 1 J.
Schwartz, R. T.: 6. Techn. Conf. (1951) Sect. 11.
Ramke, W. G.: 8. Techn. Conf. (1953) Sect. 11.
Cramsoe, K. J.: 6. Techn. Conf. (1951) Sect. 10.
Morrison, R. S.: 7. Techn. Conf. (1952) Sect. 3, S. 16.
Howard, G. W.: 7. Techn. Conf. (1952), Sect. 11.
Marshall, K. T.: 8. Techn. Conf. (1953), Sect. 10.
Howard, G. W.: 8. Techn. Conf. (1953), Sect. 20.
Reinsmith, G.: 8. Techn. Conf. (1953), Sect. 22.
Marshall, K. T. : 9. Techn. Conf. (1954), Sect. 1 J.
Mitton, P. : 10. Techn. Conf. (1955), Sect. 7 E.
Marshall, K. T.: 10. Techn. Conf. (1955), Sect. 7 G.
Weiss, A. C. : 6. Techn. Conf. (1951) Sect. 7. WEISS, A. C.: 9. Techn. Conf. (1954) Sect. 1 K.
Beekman, E. M.: 8. Techn. Conf. (1953) Sect. 21.
Pebly, jr. H. E., : 10. Techn. Conf. (1955) Sect. 7 F.
Huddle, F. P.: 8. Techn. Conf. (1953) Sect. 18.
Huddle, F. P.: 9. Techn. Conf. (1954) Sect. 1 B.
Griffiths, L. P.: IRI-Proceedings 2, Nr. 2, 557 (1955).
Mod. Plastics 29 (Sept. 1952) ; — US. P. 2 562 951 (7 Ansprüche, 10 Zitate) ; — 10. Techn. Conf. Sect. 5, S. 11, Diskussionsbemerkungen.
Schutzschilde Mod. Plastics 31, 186 (Okt. 1953).
Wehrmachtsschlitten Mod. Plast. 29, 115 (April 1952).
Diverse militärische Zwecke Mod. Plastics 28, 55 u. 146 (März 1951) ; — 28, 91 (April 1951); — 28, 64 (Mai 1951).
Landematten für Feldflughäfen B. P. 700 194 (1953).
Milit. Spec. MIL-M-15617A, „Mats Fibrous glass, For Reinforcing Plastics“.
Milit. Spec. MIL-P-7816 (A er), „Plastic Laminate ; Glass Fiber-Mat Base, Low-Pressure“.
Milit. Spec. MIL-G-1140 B, „Glass Fiber; Yarn, Cordage, Sleeving, Cloth, And Tape“.
Milit. Spec. MIL-R-7575 (USAF), „Resin, Low Pressure Laminating“.
Milit. Spec. MIL-P-8013 (USAF), „Plastic Materials, Glass Fabric Base, Low Pressure Laminated, Aircraft Structural“.
Milit. Spec: MIL-P-15037A, „Plastic-Material, Laminated, Thermosetting, Sheets, Glass-Cloth, Melamine-Resin“.
Milit. Spec. MIL-C-8073 (USAF), „Core Materials, Laminated Glass Fabric Base Plastic Honeycomb“.
Milit. Spec. MIL-S-9041A (USAF), „Sandwich Construction, Plastic, Glass Fabric Base, Laminate Facings and Honeycomb core“.
Milit. Spec. MIL-C-7439 (USAF), „Coating, Rain Erosion Resistant, for Plastic Laminates“.
Navaer 01–1A-501, „Fabrication and Repair of Reinforced Plastics“.
Milit. Spec. MIL-F-9118A, „Finish for Glass Fabric“.
Milit. Spec. MIL-F-9084 (USAF), „Fabrics, Woven Glass, Finished for Plastic Laminates“.
Milit. Spec. MIL-R-9299, Low pressure Phenolresin Laminates.
Milit. Spec. MIL-R-9300, Low pressure Epoxy resin Laminates.
Milit. Spec. MIL-P-9400, Glass reinforced low pressure Laminates.
Brockmller, F.: GUP in der Rüstung. Wehrkunde 3, 165 (1954).
Nachträglich bekannt gewordenes Schrifttum
Raffel, B. D., u. a.: Matched die molding of a large outboard motor boat hull. 11. Techn. Conf. (1956) Sect. 10B.
Naab, J. W., CDR., USCG.: Comparative operational tests of various types of 40-foot ulitily boats, including specific test data on plastic, steel and plywood types. 11. Techn. Conf. (1956) Sect. 15A.
Park, W. L.: Reinforced plastic coatings for wooden boats. 11. Techn. Conf. (1956) Sect. 15F.
Nachträglich bekannt gewordenes Schrifttum
Rosenberg, PH.: Creep characteristics of epoxy tooling plastics. 11 Techn. Conf. (1956) Sect. 7A.
Ruddiman, E.: Plastic development dies as used in the metal stamping industry. 11. Techn. Conf. (1956) Sect. 7 B.
Stanley, W. A., u. a.: Master modelling and reconciliation of inner models with plastics. 11. Techn. Conf. (1956) Sect. 7C a. D.
Sokol, B.: Recent developments and current problems in plastic tooling. 11. Techn. Conf. (1956) Sect. 7E.
Kalis, E. R.: Tips on aids for body die and tool construction. 11. Techn. Conf. (1956) Sect. 7F.
Rengert, J. A.: Formulators service to the tooling industry. 11. Techn. Conf. (1956) Sect. 7 G.
Reinhart, F. W., u. a.: Reinforced plastic springs. 11. Techn. Conf. (1956) Sect. 9C.
Kraus, H. S.: Fibrous glass pressure membranes. 11. Techn. Conf. (1956) Sect. 17F.
Nachträglich bekannt gewordenes Schrifttum
Hammond, G. K.: Current status of reinforced plastics in transportation. 11. Techn. Conf. (1956) Sect. 18A.
Levitt, S.: Current manufacturing problems in reinforced plastic components for the transportation industry. 11. Techn. Conf. (1956) Sect. 18 B.
Abbott, R. E.: Possible uses of plastic in railroad equipment. 11. Techn. Conf. (1956) Sect. 18C.
Rights and permissions
Copyright information
© 1956 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Hagen, H. (1956). Anwendungsbeispiele. In: Glasfaserverstärkte Kunststoffe. Chemie, Physik und Technologie der Kunststoffe in Einzeldarstellungen, vol 5. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-52686-2_8
Download citation
DOI: https://doi.org/10.1007/978-3-642-52686-2_8
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-52687-9
Online ISBN: 978-3-642-52686-2
eBook Packages: Springer Book Archive