Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Abe, T.; Messner, W. C.; Reed, M. L: Effective Methods to Prevent Stiction During Post-Release-Etch Processing. In: Proceedings of the IEEE Micro Electro Mechanical Systems, 29.01. — 02.02. 1995 in Amsterdam. Amsterdam: IEEE Catalog, 1995, S. 94–99
Adamson, A.W.: Physical Chemistry of Surfaces. New York u. a.: John Wiley & Sons, 1982
Arai, T.; Stoughton, R.; Jaya Y.M.: Micro Hand Module using Parallel Link Mechanism. In: Proceedings of the Japan/USA Symposium on Flexible Automation, San Francisco, 1992, S. 163–168
Atkins, P. W.: Physical chemistry. Oxford: Oxford University Press, 1979
Bashforth, F.; Adams, J. C.: An Attempt to test the Theories of Capillary Action by comparing the theoretical and measured Forms of Drops and Solids. Cambridge: Cambridge University Press, 1883
Bischof, C; Possart, W.: Adhäsion, Theoretische und experimentelle Grundlagen.
Berlin: Akademie-Verlag, 1983
Brockmann, W.: Untersuchungen von Adhäsionsvorgängen zwischen Kunststoffen und Metallen. In: Adhäsion 1975, Heft 1, S. 4–14
Bronstein, I. N.; Semendjajew, K.: Taschenbuch der Mathematik. Thun, Frankfurt/Main: Verlag Harri Deutsch, 1987
Büttgenbach, S.: Schlüsseltechnologie Mikrosystemtechnik. In: wt-Produktion und Management (1995) 85, S. 555
Chu, P.; Pister, K.: Analysis of Closed-loop Control of Parallel-Plate Electrostatic MicroGrippers. In: Proceedings of 1994 IEEE International Conference on Robotics and Automation, 8.–13. Mai 1994, San Diego, Californien. Washington, Brüssel, Tokyo: IEEE Computer Society Press, 1994, S. 820–825
Dario, P.; Carrozza, M.C.; Croce, N.; u. a.: “Non traditional” technologies for microfabrication. In: Micro Mechanics Europe 1994, 576. September 1994 in Pisa/Dario, P.. Pisa: CPR, 1994, S. 86–98
Norm DIN 8593 09. 1985: Fertigungsverfahren Fügen
Druschke, W.: Adhäsion und Tack von Haftklebstoffen. Sonderdruck eines Vortrags zur A.F.E.R.A. -Tagung, Oktober 1986, Edinburgh
Eck, B.: Technische Strömungslehre. Berlin u.a.: Springer-Verlag, 1978
Ehrfeld, W.: Nicht nur Chips mit Augen und Ohren…. In: F&M 103 (1995) Heft 9, S. 484–485
Eversheim, W.; Klocke, F.; Pfeifer, T.; u.a.: Herstellung von Mikrobauteilen — Perspektiven für den Maschinenbau. In: Wettbewerbsfaktor Produktionstechnik, Aachener Perspektiven, Aachener Werkzeugmaschinen-Kolloquium AWK, 1996. Düsseldorf: VDI Verlag GmbH, 1996
Fox, H. W.; Hare, E. F.; Zisman, W. A.: Wetting Properties of Organic Liquids on high energy Surfaces In: Journal of Phys. Chem. 59, 1955, S. 1097–1105
Fukuda, T.; Mitsumoto, N.; Arai, F.; u.a.: Design and Experiments of Micro Mobile Robot Using Electromagnetic Actuators. In: Proceedings of the 3. International Symposium on Micro Machine and Human Science, 1992 in Nagoya. Nagoya: 1992, S.77–81
Fukuda, T.; Ishihara, H.: Micro Optical Robotic System with Cordless Optical Power Supply. In: Proceedings of the 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems, 1993 in Yokohama. Yokohama: IEEE, 1993, S. 1473–1478
Gerthsen, C.; Kneser, H. O.; Vogel, H.: Physik: Lehrbuch zum Gebrauch neben Vorlesungen. 17. Auflage. Berlin, Heidelberg: Springer, 1992
Greitmann, G.; Buser, R.: Microtools for Nanorobots. In: Seminar on Handling and Assembly of Microparts, Proceedings and Lectures, 14. November 1994, Wien/H. Detter. Wien: Institut für Feinwerktechnik, 1994
Greitmann, G.; Buser, R. A.: Tactile microgripper for automated handling of microparts. In: Sensors and Actuators A 53 (1996), S. 410–415
Haag, J.; Kolbeck, A.: Stand und Entwicklung der Drahtbondtechnik. Berlin: VDIA/DE-Technologiezentrum Infornr.ationstechnik GmbH, 1990
Hartland, S.; Hartley, R.: Axisymmetric Fluid-Liquid Interfaces. Amsterdam, Oxford, New York: Elsevier Scientific Publishing Company, 1976
a Henschke, F.: Greifen mikromechanischer Strukturen mit adhäsiven Hilfsstoffen. In: F&M 102 (1994) 9, S. 411–415
b Henschke, F.: Miniaturgreifer und montagegerechtes Konstruieren in der Mikromechanik. Fortschr.-Ber. VDI Reihe 1 Nr. 242. Düsseldorf: VDI-Verlag, 1994
Hering, E.; Martin, R.; Stohrer, M.: Physik für Ingenieure. Düsseldorf: VDI-Verlag, 1989
Hesse, S.: Greifer-Praxis: Greifer in der Handhabungstechnik. 1. Auflage. Würzburg: Vogel, 1991
a Hesselbach, J.; Kühn, M.: Montage mikrosystemtechnischer Bauteile. In: me (1995) Heft 2, S. 24–27
b Hesselbach, J.; Pittschellis, R.: Greifer für die Mikromontage. In: wt-Produktion und Management 85 (1995), S.595–600
Hosokawa, K.; Shimoyama, I.; Miura, H.: Two-Dimensional Micro-Self-Assembly using the Surface Tension of Water. In: The Ninth Annual International Workshop on Micro Electro Mechanical Systems, San Diego, 1996. San Diego: IEEE, 1996, S. 67–72
Hotta, K.; Takeda, K.; linoya, K.: The Capillary Binding Force of a Liquid Bridge. In: Powder Technology, 10 (1974), S. 231 – 242
Akademischer Verein Hütte, e. V. (Hrsg.): Hütte, Taschenbuch der Werkstoffkunde. Berlin, München: Verlag Wilhelm Ernst & Sohn, 1967
linoya, K.; Asakawa, S.; Hotta, K.; u.a.: Liquid Surface Profiles in Contact with Symmetrical Solid Surfaces. In: Powder Technology, 1 (1967), S. 28–32
Israelachvili, J.N.: Intermolecular and surface forces. London u. a.: Academic Press, 1985
Kaelble, D. H.: Physical Chemistry of Adhesion. Wiley-lnterscience, a Division of John Wiley & Sons, Inc., 1971, S. 120–125,
Kaelble, D. H.: Physical Chemistry of Adhesion. Wiley-lnterscience, a Division of John Wiley & Sons, Inc., 1971, S. 144–147
Kaliweit, W.-A.: Miniaturgreifer nach biologischem Vorbild. Dresden, Techn. Universität, Diss., 1988
Kergel, H.; Köhler, Th.; Ruf, Ch.: Mikrosystemtechnische Produkte und deren Fertigungstechnik. In: wt-Produktion und Management 85 (1995), S. 572–575
Kim, C. J.; Pisano, A. P.; Muller, S.: Silicon-Processed Overhanging Microgripper In: Journal of Microelectromechanical Systems, 1 (1992) Nr. 1, S. 31–35
Klein: Stand des Feingießverfahrens. VDI-Bericht 1031. VDI-Verlag, 1993
Kozuka, T.; Tuziuti, T.; Mitome H.: Non-Contact Micromanipulation Using an Ultrasonic Standing Wave Field. In: The Ninth Annual International Workshop on Micro Electro Mechanical Systems, San Diego, 1996. San Diego: IEEE, 1996, S. 435–440
Krause, W.; Gerlach, G.: Fertigung in der Feinwerk- und Mikrotechnik: Verfahren, Werkstoffe, Gestaltung. München, Wien: Hanser, 1996
Krull, F.: Hochstapler in der Mikroweit. In: Bild der Wissenschaft 7 (1995), S. 108–109
Majumdar, S. R.; Michael, D. H.: The equilibrium and stability of two dimensional pendent drops. In: Proc. R. Soc. Lond. A. 351 (1967), S. 89–115
Man, P. F.; Gogoi, B. P.; Mastrangelo, C. H.: Elimination of Post-release Adhesion in Microstructures using thin conformai fluorocarbon films. In: The Ninth Annual International Workshop on Micro Electro Mechanical Systems, San Diego, 1996. San Diego: IEEE, 1996, S. 55–60
Matijevic, E.: Surface and colloid science. New York u. a.: Wiley — Interscience, 1969
Mingels, J.: Trends bei der Oberflächenmontage. Vortrag bei Electronic Forum am 25. April 1996
Mitsuishi, M.; Kobayashi, K.; Nagao, T.; u.a.: Development of Tele-Operated Micro-Handling/Machining System Based on Information Transformation. In: Proceedings of the 1993 IEEE/RSJ Int. Conference on Intelligent Robots and Systems, 1993 in Yokohama. Yokohama: 1993, S. 1473–1478
Miyazaki, H.; Sato, T.: Fabrication of 3D quantum optical devices by pick-and-place forming. In: The Ninth Annual International Workshop on Micro Electro Mechanical Systems, San Diego, 1996. San Diego: IEEE, 1996, S. 318–324
Moesner, F.M.; Higuchi, T.: Devices for Particle Handling by an AC Electric Field. In: Proceedings of the 1995 IEEE International Conference, 29. Januar bis 02. Februar 1995 in Amsterdam. Amsterdam: IEEE, 1995, S.66–71
Möllendorf, M.: Mikromechanische Komponenten und Systeme. In: me (1995) Heft 3, S. 8–9
Monkman, G. J.: Programmable shape retention. In: Proceedings of the 4th International Conference on New Actuators, 15.–17.06.1994 in Bremen. Bremen: AXON Technoloie Consult GmbH, 1994, S. 341–347
Moore, W., Hummel, D.: Physikalische Chemie. Berlin, New York: Walter de Gruyter, 1983
Morishita, H.; Hatamura, Y.: Development of ultra micro manipulator systems under stereo SEM observation. In: Proceedings of the 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems 1993 in Yokohama. Yokohama: 1993, S. 1717–1721
Neumann, A. W.; Renzow, D.; Reumuth, H.; u.a.: Der Einfluß der Rauhigkeit auf die Benetzung. In: Fortschr. Kolloide u. Polymere 55 (1971) S. 49–54
Neumann, A.W.: Contact angle and their temperature dependance: Thermodynamic status, measurement, interpretation and application. In: Adv.Coll.lnterf.Sci. 4 (1974), S. 105–191
Olivier, M.; Hunter, I.W.; Lafontaine, S.; u.a.: A Tele-nano-Robot for microfabrication and microassembly. In: Proceedings on the IARP Workshop on Micromachine Technologies and Systems 1993 in Tokyo. Tokyo: 1993, S. 16–23
Othsu, M.; Minami, K.; Esashi, M.: Fabrication of packaged thin beam structure by an improved drying method. In: The Ninth Annual International Workshop on Micro Electro Mechanical Systems 1996 in San Diego. San Diego: IEEE, 1996, S. 228–233
Padday, J. F.; Pitt, A.: Axisymmetric Meniscus Profiles. In: Journal of Colloid and Interface Science, 38 (1972) Nr. 2, S. 323–334
Padday, J. F.: Wetting, Spreading and Adhesion. London, New York, San Fransisco: Academic Press 1978
Parker, J. K.; Dubey, R.; Paul, F. W.; u.a.: Robotic Fabric Handling for Automating Garment Manufacturing. In: Robot Grippers/D. T. Pham, W. B. Henginbotham. Berlin, Heidelberg, New York, Tokyo: Springer, 1986
Pietsch, W.; Rumpf, H.: Haftkraft, Kapillardruck, Flüssigkeitsvolumen und Grenzwinkel einer Flüssigkeitsbrücke zwischen zwei Kugeln. In: Chemie-Ing.-Techn., 39 (1967) Heft 15, S. 885–893
Pitts, E: The Stability of pendant liquid drops. Part 1. Drops formed in a narrow gap.
In: J. Fluid Mech. (1973), Nr. 59, Teil 4, S. 753–767
Pitts, E: The Stability of pendant liquid drops. Part 2. Axial symmetry. In: J. Fluid Mech. (1974), Nr. 63, Teil 3, S. 487–508
Prandtl, L; Oswatitsch, K.; Wieghardt, K.: Führer durch die Strömungslehre. Braunschweig, Wiesbaden: Vieweg, 1990
SPI Robot Systeme GmbH: Produktblatt. Oppenheim, 1995 — Firmenschrift
Reichl, H.: Hybridintegration. Technologie und Entwurf von Dickschichtschaltungen. Heidelberg: Dr. Alfred Hüthig Verlag, 1988
Reinhart, G.; Höhn, M.: Flexible Montage von Miniaturbauteilen. In: F&M 105(1997) 1–2, S. 43–45
Salim, R.; Wurmus, H.: Kleinste Objekte im Griff, Siliziumgreifer für die Mikromontage. In: F & M 104 (1996) 9, S. 637–640
Sandmaier, H.; Zengerle, R.: Microfluidics. In: Seventh International Symposium on Micro Machine and Human Science, 2. bis 4. Oktober 1996 in Nagoya, Japan. Nagoya: 1996, S. 13–20
Sato, T.; Koyano, K.; Nakao, M.; u.a.: Micro Handling Robot for Micromachine Assembly. In: Proceedings of the 1st IARP Workshop on Micro Robotics and Systems, Juni 1993 in Karlsruhe. Dillmann, R.; Holler, E. (Hrsg.). Karlsruhe: 1993, S. 138–146
Schlaich, G.: Kabelbaummontage mit Industrierobotern. Berlin u.a.: Springer, 1988. Zugl. Universität Stuttgart, Diss., 1988
Schmalz, K.: Vacuum Grippers on Robots and Handling Systems. In: Robotics ‘94 — Flexible Produktion — Flexible Automation, Proceedings of the 25th International Symposium on Industrial Robots, 25.–27. April 1994, Hannover/MEP. Hannover, 1994, S.59–66
Schraft, R. D.; Schweizer, M.; Bark, C; Vögele, G.; Weisener, T.: Advances in Micro-Assembly. In: Proceedings of the 28th CIRP International Seminar on Manufacturing Systems, 14.–17. Mai 1996, Johannesburg/ Z. Katz. Johannesburg: Rand Afrikaans University, 1996, S. 83–88
Schomburg, W.K.; Menz, W.; Seidel, D.; u.a.: Assembly for Micromechanics and LIGA. In: Micro Mechanics Europe 1994, 5./6. September 1994 in Pisa/Dario, P.. Pisa: CPR, 1994, S. 17–27
Schubert, H.: Experimentelle Bestimmung von Haftkraft und Randwinkel am System einer Flüssigkeitsbrücke zwischen zwei Kugeln. In: Chemie-Ing.-Techn. 40 (1968) Heft 15, S. 745–747
Schubert, H.: Kapillarität in porösen Feststoff Systemen. Berlin, Heidelberg: Springer-Verlag, 1982
Schutzrecht P 24 04 863.3 (07.08.1975). Daimler-Benz AG. Pr: 01.02.1974
Schutzrecht DE 43 15 795 A1 (17.11.1994). Zevatech AG. Pr: 13.05.1993
Schutzrecht DE 44 46 489 C 1 (15.05.1996). Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e. V.. Pr.: 23.12.1994
Schweigert, U.: Flexible Robotergreifer für die Präzisionsmontage. In: Transfer (1994) 4, S. 20–23
Seegräber, L.: Greifsysteme für Montage, Handhabung und Industrieroboter: Grundlagen — Erfahrungen — Einsatzbeispiele. Ehningen bei Böblingen: Expert-Verlag, 1993
Simon, G.: Die Kohäsion von Klebstoffen. In: Adhäsion (1974) Heft 4, S. 98–101
Simon, G.: Über die Klebrigkeit. In: Adhäsion (1976) Heft 3, S. 75–76
Spur, G.: Analyse und Entwicklung flexibler Greifeinrichtungen unter Berücksichtigung werkstückbezogener Einflußfaktoren, Abschlußbericht über das Forschungsvorhaben. Berlin: Institut für Werkzeugmaschinen und Fertigungstechnik, TU Berlin, 1981
Stroppe, H.: Physik. Leipzig: VEB-Fachbuchverlag Leipzig, 1990
Suzuki, Y.: Flexible Microgripper and its Application to Micromeasurement of Mechanical and Thermical Properties. In: The Ninth Annual International Workshop on Micro Electro Mechanical Systems 1996 in San Diego. San Diego: IEEE, 1996, S. 406–411
Suzumori, K.; Kondo, F.; Tanaka, H.: Miniature Walking Robot Using Flexible Microactuators. In: Proceedings of the 2. International Symposium on Micro Machine and Human Science 1991 in Nagoya. Nagoya: 1991.S.29–36
Suzumori, K.; Likura, S.; Tanaka, H.: Development of Flexible Microactuator and Its Application to Robotic Mechanisms. In: Proceedings of the 1991 IEEE International Conference on Robotics and Automation 1991 in Sacramento. Sacramento: 1991, S. 1622–1627
Suzumori, K.; likura, S.; Tanaka, H.: Flexible Microactuator for Miniature Robots. In: Proceedings of the 1991 IEEE International Conference on Robotics and Automation 1991 in Sacramento. Sacramento: 1991, S.204–209
Tatter, A.: Kleinteilegreifer mit Hitzdrahtantrieb. In: Feingerätetechnik 36 (1987) 5, S. 214–215
VDI-Richtlinie 2860 E Blatt 1: Handhabungsfunktionen, Handhabungseinrichtungen, Begriffe, Definitionen, Symbole. Oktober 1982
von Meiss, P.: Automated Assembly Units for Microsystems. In: mst news 9 (1994), S. 2–3
Wallrabe, U.: Rotierende Mikrostrukturen als Grundlage für einen mikromechanischen Strömungssensor. In: Werkstoffe der Mikrotechnik: Basis für neue Produkte, 24/25.10.1991, Karlsruhe/VDIA/DE Gesellschaft Feinwerktechnik. Düsseldorf: VDI-Verlag, 1991, S. 327 – 337
Walther, J.: Montage großvolumiger Produkte mit Industrierobotern. Berlin u.a.: Springer, 1985. Zugl. Universität Stuttgart, Diss., 1985.
Warnecke, H.-J.; Gillner, A.: Bedeutung der Mikrostrukturtechnik — Perspektiven für Laseranwendungen. In: Laser in Forschung und Technik, Vorträge des 12. Internationalen Kongresses Laser 95. Springer, 1995, S. 927–942
Weiss, P.: Adhesion and Cohesion. Elsevier Publishing Company, 1962, S. 192–195
Westkämper, E.; Hoffmeister, H.-P.; Gäbler, J.: Spanende Mikrofertigung. In: F&M 104 (1996) Nr. 7–8, S. 525–530
Woodrow, J.; Chilton, H.; Hawes, R. I.: Forces between Slurry Particles due to Surface Tension. In: J. Nucl. Energy, Part B: Reaktor Technology, 1 (1961), S. 229–237
Zisman, W. A.: Relation of the Equilibrum Contact Angle to Liquid and Solid Constitution. In: Advances in Chemistry, Series 43. Washington: American Chemical Society, 1964
Zühlke, D.; Fischer, R.; Hankes, J.: Millimetergenau positioniert. In: SMM Nr. 35(1996), S. 18–20
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer-Verlag, Berlin, Heidelberg
About this chapter
Cite this chapter
Bark, KB. (1999). Schrifttum. In: Adhäsives Greifen von kleinen Teilen mittels niedrigviskoser Flüssigkeiten. IPA-IAO Forschung und Praxis, vol 286. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-47974-8_9
Download citation
DOI: https://doi.org/10.1007/978-3-642-47974-8_9
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-65638-8
Online ISBN: 978-3-642-47974-8
eBook Packages: Springer Book Archive