Abstract
Computer-based multidimensional modeling for in-cylinder processes is rapidly developing. The objective is a method of obtaining detailed velocity and temperature information which covers the entire space in a combustion chamber.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Preview
Unable to display preview. Download preview PDF.
References
A.D. Gosman, R.J.R. Johns, and A.P. Watkins, Combustion Modeling in Reciprocating Engines, ed. J.N. Mattavi and C.A. Amann, pp.69–129, Plenum Press, New York, 1980.
A.D. Gosman, and R.J.R. Johns, Development of a Predictive Tool for In-Cylinder Gas Motion in Engines, SAE Paper 780315, 1978.
A.D. Gosman, and P.S. Harvey, Computer Analysis of Fuel Mixing and Combustion in an Axisymmetric D. I. Diesel, SAE Paper 820036, 1982.
S.H. El Tahry, A Numerical Study on the Effects of Fluid Motion at Inlet-Valve Closure on Subsequent Fluid Motion in a Motored Engine, SAE Paper 820035, 1982.
M. Ikegami, K. Horibe, and G. Komatsu, Numerical Simulation of Flows in an Engine Cylinder (2nd Report), Trans. JSME, vol.51, No. 468, pp. 2625–2702, 1985.
M. Ikegami, Y. Kidoguchi, and K. Nishiwaki, A Multidimensional Model Prediction of Heat Transfer in Non-Fired Engines, SAE Paper 860467, 1986.
T. Kondoh, A. Fukumoto, K. Ohsawa, and Y. Ohkubo, An Assessment of a Multi-Dimensional Numerical Method to Predict the Flow in Internal Combustion Engines, SAE Paper 850500, 1985.
R. Diwaker, Assessment of the Ability of a Multi-Dimensional Computer Code to Model Combustion in a Homogeneous-Charge Engine, SAE Paper 840230, 1984.
T. Adachi, S-Kato, and H. Tsujiyama, Numerical Analysis of Scavenging Flow in a Two-Cycle Internal Combustion Engine, ASME, the Winter Annual Meeting, pp. 29-34, 1982.
A.D. Gosman, Y.Y. Tsui, and C. Verifidas, Flow in a Model Engine with a Shrouded Valve-Combined Experimental and Computational Study, SAE paper 850498, 1985.
M. Ikegami, G. Komatsu, and K. Nishiwaki, Numerical Simulation of Flow in an Engine Cylinder (1st Report), Trans. JSME, vol.51, No. 466, pp. 1933–1940, 1985.
M. Ikegami, G. Komatsu, and K. Nishiwaki, Numerical Simulation of Flow in an Engine Cylinder (1st Report), Bulletin of JSME, vol.29, No. 248, pp. 508–515, 1986.
K. Nishiwaki, G. Komatsu, and M. Ikegami, Numerical Prediction of Fluid Motion in an Internal Combustion Engine During Intake Process, Trans. JSME Ser. B, vol.51, No. 470, pp. 3223–3231, 1985.
K. Nishiwaki, Prediction of Three-Dimensiona1 Fluid Motion During Intake Process and Swirl Ratios in Four-Cycle Engines, International Symposium on Diagnostics and Modeling of Combustion in Reciprocating Engines, Sept., 1985, Tokyo, Proceedings, pp. 285-294.
T. Wakisaka, Y. Shimamoto, Y. Ishiki, and T. Shibata, Numerical Simulation of Gas Flow in the Cylinders of Four-Stroke Cycle Engines (1st Report), Trans. JSME Ser. B, vol.52, No. 476, pp. 1555–1564, 1986.
W. Brandstatter, R.J.R. Johns, and G. Wigley, The Effect of Inlet Port Geometry on In-Cylinder Flow Structure, SAE Paper 850499, 1985.
T. Yamada, T. Inoue, A. Yoshimatsu, T. Hiramatsu, and M. Konishi, In-Cylinder Gas Motion of Multivalve Engine-Three Dimensional Numerical Simulation, SAE Paper 860465, 1986.
M. Kojima, and H. Takata, Numerical Analysis of Flows in Reciprocating Engines, Trans. JSME Ser. B, vol.51, No. 471, pp. 3804–3809, 1985.
S.V. Patankar, Numerical Heat Transfer and Fluid Flow, McGraw-Hill, pp. 126-131, 1980.
N.N. Mansour, Flows in Internal Combustion Engines, ASME, Winter Annual Meeting, Proceeding, p. 39, 1982.
G. Komatsu, S. Sirae, and T. Hosokawa, Flow Visualization of the Producing Process of Induction Swirl Using a Water Model, Trans. JSME Ser. B, vol.51, No. 472, pp. 4102–4108, 1985.
Y. Hamamoto, E. Tomita, H. Mitsuba, and Y. Kataoka, Measurements of Swirling Velocities in a Four-Stroke Engine, JSME Ckugoku-Shikoku Section, The 23rd Annual Meeting, Preprint No.855-1, pp.166-168, 1985.
Y. Hamamoto, Private Communication, January, 1986.
K. Dao, O.A. Uyehara, and P.S. Myers, Heat Transfer Rates at Gas-Wall Interfaces in a Motored Piston Engine, SAE Paper 730632, 1973.
K. Dao, Ph. D. Thesis, University of Wisconsin-Madison, 1972.
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1987 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Nishiwaki, K. (1987). Multidimensional Modeling of Flow and Heat Transfer During the Intake and Compression Processes in a Motored Engine Cylinder. In: Iinuma, K., Ohsawa, T., Asanuma, T., Doi, J. (eds) Laser Diagnostics and Modeling of Combustion. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-45635-0_38
Download citation
DOI: https://doi.org/10.1007/978-3-642-45635-0_38
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-45637-4
Online ISBN: 978-3-642-45635-0
eBook Packages: Springer Book Archive