Abstract
Chatters are induced by rigidity-flexibility coupling between tools and workpieces, which cause cutting disturbances, over cut and quick tool wear and hence greatly limits the workpiece machining efficiency and quality. To attenuate the chatter dynamics, traditional passive control methods usually decrease the spin speed or cutting depth at the cost of reducing machining efficiency. In this work, we investigate deeply on the structure of the cutting force variation matrix and then design an online system identification method based on the Fourier series. In this way, a Linear Quadratic Regulator adaptive control method is developed to greatly enlarge the chatter stability region in the Lobe Diagram. Moreover, the receding horizon and output rectification mechanisms are applied to overcome the external disturbances as well. The feasibility and superiority of the method are verified by the benchmark examples, where closed-loop stable operation points are remarkably increased and a higher productivity rate is thus achieved.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Ding, Y., Zhu, L.M., Zhang, X.J., Ding, H.: Milling stability analysis using the spectral method. Science China Technological Sciences 54(12), 3130–3136 (2011)
Ding, Y., Zhu, L.M., Zhang, X.J., Ding, H.: Numerical integration method for prediction of milling stability. J. Manuf. Sci. Eng. 133(3), 031005 (2011)
Kern, S., Ehmann, C., Nordmann, R., Roth, M., Schiffler, A., Abele, E.: Active damping of chatter vibrations with an active magnetic bearing in a motor spindle using μ-synthesis and an adaptive filter. In: Proc. 8th Int. Conf. Motion Vibr. Control, Daejeon, Korea (2006)
Insperger, T., Grandisek, J., Kalveram, M., Stépán, G., Winert, K., Govekar, E.: Machine tool chatter and surface location error in milling processes. J. Manuf. Sci. Eng. 128, 913–920 (2006)
Insperger, T., Stépán, G.: Stability analysis of turning with periodic spindle speed modulation via semi-discretisation. J. Vibr. Control 10, 1835–1855 (2004)
Yilmaz, A., AL-Regib, E., Ni, J.: Machine tool chatter suppression by multi-level random spindle speed variation. J. Manuf. Sci. Eng. 124(2), 208–216 (2002)
Dohner, J.L., Lauffer, J.P., Hinnerichs, T.D., Shankar, N., Regelbrugge, M., Kwan, C.-M., Xu, R., Winterbauere, B., Bridgerf, K.: Mitigation of chatter instabilities in milling by active structural control. J. Sound and Vibr. 269(1-2), 197–211 (2004)
Fittro, R.L., Knospe, C.R., Stephens, L.S.: μ-synthesis applied to the compliance minimization of an active magnetic bearing hsm spindle’s thrust axis. Machin. Sci. Technol. 7(1), 19–51 (2003)
Zhang, Y., Sims, N.D.: Milling workpiece chatter avoidance using piezoelectric active damping: A feasibility study. Smart Mater. Structures 14(6), N65–N70 (2005)
Shiraishi, M., Yamanaka, K., Fujita, H.: Optimal control of chatter in turning. Int. J. Mach. Tools Manuf. 31(1), 31–43 (1991)
Chen, M., Knospe, C.R.: Control approaches to the suppression of machining chatter using active magnetic bearings. IEEE Trans. Control Syst. Technol. 15(2), 220–232 (2007)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Zhang, HT., Chen, Z., Ding, H. (2013). Adaptive LQR Control to Attenuate Chatters in Milling Processes. In: Lee, J., Lee, M.C., Liu, H., Ryu, JH. (eds) Intelligent Robotics and Applications. ICIRA 2013. Lecture Notes in Computer Science(), vol 8103. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-40849-6_53
Download citation
DOI: https://doi.org/10.1007/978-3-642-40849-6_53
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-40848-9
Online ISBN: 978-3-642-40849-6
eBook Packages: Computer ScienceComputer Science (R0)