Abstract
Omnidirectional vehicles have been widely applied in several areas, but most of them are designed for the case of motion on flat, smooth terrain, and are not feasible for outdoor usage. This paper presents an omnidirectional mobile robot that possesses high mobility in rough terrain. The omnidirectional robot employs four sets of mobility modules, called active split offset caster (ASOC). The ASOC module has two independently-driven wheels that produce arbitrary planar translational velocity, enabling the robot to achieve its omnidirectional mobility. Each module is connected to the main body of the robot via a parallel link with shock absorbers. In this paper, a design and development of the ASOC-driven omnidirectional mobile robot for rough terrain are described. Also, a control scheme that considers a kinematics of the omnidirectional mobile robot is presented. The omnidirectional mobility of the robot regardless of ifs heading direction is experimentally evaluated based on a metric called omnidirectional mobility index.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
P. Muir, C. Neuman, Kinematic modeling for feedback control of an omnidirectional wheeled mobile robot, in Proceeding of the IEEE International Conference on Robotics and Automation, Raleigh, NC, USA, 1987, pp. 1772–1778
S. Fujisawa, K. Ohkubo, T. Yoshida et al., Improved moving properties of an omnidirectional vehicle using stepping motor, in Proceedings of the 36th Conference on Decision and Control, San Diego, CA, 1997, pp. 3654–3657
R. Williams, B. Carter, P. Gallina, G. Rosati, Wheeled omnidirectional robot dynamics including slip, in Proceedings of the 2002 ASME Design Engineering Technical Conference, Montreal, Canada, pp. 201–207
J. Blumrich, Omnidirectional wheel. US Patent 3,789,947 (1974)
R. Smith, Omnidirectional vehicle base. US Patent 4,715,460 (1987)
L. Ferriere, B. Raucent, ROLLMOBS, A new universal wheel concept, in Proceeding of the International Conference on Robotics and Automation, Leuven, Belgium, 1998, pp. 1877–1882
M. West, H. Asada, Design of ball wheel mechanisms for omnidirectional vehicles with full mobility and invariant kinematics. ASME J. Mech. Des. 117(2), 153–161 (1997)
K. Tadakuma, R. Tadakuma, J. Berengeres, Development of holonomic omnidirectional vehicle with “Omni-Ball”: spherical wheels, in Proceedings of the, IEEE/RSJ International Conference on Intelligent Robotics and Systems, San Diego, CA, 2007, pp. 33–39
Kornylak Corporation, http://www.kornylak.com/wheels/wheels.html. Accessed Oct 2012
Vehicle Technologies Inc., http://www.vetexinc.com/vehicles/sidewinder.html. Accessed Oct 2012
H. Yu, S. Dubowsky, A. Skwersky, Omnidirectional mobility using active split offset castors. ASME J. Mech. Des. 126(5), 822–829 (2004)
T. Park, J. Lee, B. Yi, W. Kim, B. You, Optimal design and actuator sizing of redundantly actuated omnidirectional mobile robots, in Proceedings of the IEEE International Conference on Robotics and Automation, Washington DC, 2002, pp. 732–737
M. Udengaard, K. Iagnemma, Design of an omnidirectional mobile robot for rough terrain, in Proceedings of the IEEE International Conference on Robotics and Automation, Pasadena, CA, 2008, pp. 1666–1671
J. Wong, Theory of Ground Vehicles, 4th edn. (Wiley, New York, 2008). 4th edn.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Ishigami, G., Pineda, E., Overholt, J., Hudas, G., Iagnemma, K. (2014). Design, Development, and Mobility Test of an Omnidirectional Mobile Robot for Rough Terrain. In: Yoshida, K., Tadokoro, S. (eds) Field and Service Robotics. Springer Tracts in Advanced Robotics, vol 92. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-40686-7_40
Download citation
DOI: https://doi.org/10.1007/978-3-642-40686-7_40
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-40685-0
Online ISBN: 978-3-642-40686-7
eBook Packages: EngineeringEngineering (R0)