Abstract
Reciprocating membrane pump’s fault diagnosis usually needs a dynamic model which can accurately reflect the running state of the system. But the dynamic models of the pump used in the past mostly have a fixed crank angular velocity, and have no consideration of the relations between crank speed, piston pressure, inertia force, etc. In this paper, a new dynamic model of the reciprocating pump include power end and hydraulic ends is founded to solve this problem. The Matlab computed results of the model show that, angular velocity of the crank will keep fluctuating in a limited area after the system become stable, and the fluctuation range with a power fixed input is much smaller then when the input torque is fixed. The results are close to actual experiences and the dynamic model of the reciprocating pump can be used in the further studies of the reciprocating membrane pump’s fault diagnosis.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Chen Dewei (2005) Simulation of slider-crank mechanism based on Matlab (in Chinese). J Taiyuan Univ Sci Technol 26(3):172–175
Danielson P (2000) Diaphragm pump designs determine results. R&D Mag 42(11):59–61
Han Zhixin, Shi Wenrui, Lu Xuehong (2006) Effect on dynamic character of internal combustion engine by different length parameters of crank slide mechanism (in Chinese). Coal Mine Mach 27(3):435–437
Ling Xueqin (2006) Core technologies and technical references of the reciprocating membrane pump (in Chinese). Dev Innov Mach Electr Prod 19(5):45–48
Liu Jie, Li Chaofeng, Wen Bangchun (2007) Dynamic properties analysis of the diaphragm pump based on virtual prototype (in Chinese). J Mech Transm 31(2):1–4
Qin Wei-xian (2012) Dynamic model of the reciprocating pump’s crank-link mechanism and analysis (in Chinese). J Mech Transm 36(3):70–73
Shi Lichen, Duan Zhishan (2009) Dynamic modelling and analysis on loose joint of crank slider mechanism of membrane pump (in Chinese). J Mach Des Tianjin 26:40–43
Wang Guoqing, Liu Hongzhao (2001) Dynamic response of slider-crank mechanism with clearance (in Chinese). Trans Chin Soc Agric Mach 32(6):5–7
Zhang Hongjia, Huang Yi, Wang Jiwei (2000) Hydraulic and pneumatic drive. China Machine Press, Beijing
Zhang Jinfu, Xu Qingyu, Zhang Ling (2001) Dynamic modeling and calculation of slider-crank mechanism with flexible connecting rod and viscous friction (in Chinese). Acta Aeronautica et Astronautica Sinica 22(3):274–276
Zhang Yeying (1999) Hydromechanics. Higher Education Press, Beijing, pp 143–163
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Meng, Py., Liu, K., Xu, L. (2013). Power-Hydraulic Coupling Dynamic Model of the Reciprocating Membrane Pump Used in Fault Diagnosis and the Simulation. In: Qi, E., Shen, J., Dou, R. (eds) Proceedings of 20th International Conference on Industrial Engineering and Engineering Management. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-40063-6_21
Download citation
DOI: https://doi.org/10.1007/978-3-642-40063-6_21
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-40062-9
Online ISBN: 978-3-642-40063-6
eBook Packages: Business and EconomicsBusiness and Management (R0)