Abstract
A simultaneously solving model is presented for a small room with single thermal environment, and the model is used to predict inner surface temperature and air temperature. Combined heat transfer consists of thermal conduction, convection, and radiation, which exist on building inner surface temperature and air temperature that are coupled through each other. The construction thought of simultaneously solving model: Based on the principle of energy conservation, heat conservation equations are established for inner surface by considering thermal conduction, convection, and radiation, and air heat conservation equations are also established by using indoor air as control volume. Inner surface temperature and air temperature can be received by simultaneously solving and iterative calculation. Direct radiation absorption model and Gebhart absorption coefficient model are considered, respectively, in heat conservation equations of simultaneously solving model. Taking environmental laboratory (5 × 3.5 × 2.5 m) as physical model, condition calculation and experimental verification have taken. Under variety of conditions such as different wall heat flow and different air supply volume, inner surface temperature and air temperature are calculated by simultaneously solving model. The simultaneously solving model based on Gebhart absorption coefficient model is more exact than the model based on direct radiation absorption model. The calculation results of two kinds of simultaneously solving model are compared with test date and provide some important information for applying radiation model of simultaneously solving model.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Holman J P et al (2002) Heat transfer. McGraw-Hill higher education. A division of the McGraw-Hill companies
Karadag Refet (2009) New approach relevant to total heat transfer coefficient including the effect of radiation and convection at the ceiling in a cooled ceiling room. Appl Therm Eng 29:1561–1565
Ardenali Morteaz M (2004) Proof of concept modeling of energy transfer mechanisms for radiant conditioning panels. Energy Convers Manage 45:2005–2017
Yaoqing Lu (2008) Practical heating air conditioning design manual. China Building Industry Press, Beijing
Yan Qishen, Zhao Qingzhu (1986) Building thermal process. China Building Industry Press, Beijing
Gebhart B (1959) A new method for calculating radiant exchanges. ASHRAE Transactions 65:321–332
Huang C, Li M (2001) A method for calculating surface temperature in the case of coupled convective and radiative heat transfer in a large space building. J Univ Shanghai for Sci Tech, 23(4):322–327
Acknowledgments
This work was supported by the National Natural Science Foundation of China (No. 51108263, 51278302) and Shanghai Municipal Education Commission (No. J50502).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Lv, L., Huang, C., Chen, J., Wang, F., Zou, Z., Wang, X. (2014). Experimental and Theoretical Study on the Thermal Environment Based on Simultaneously Model in a Room. In: Li, A., Zhu, Y., Li, Y. (eds) Proceedings of the 8th International Symposium on Heating, Ventilation and Air Conditioning. Lecture Notes in Electrical Engineering, vol 261. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-39584-0_6
Download citation
DOI: https://doi.org/10.1007/978-3-642-39584-0_6
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-39583-3
Online ISBN: 978-3-642-39584-0
eBook Packages: EngineeringEngineering (R0)