Advertisement

Collagen Bundle Orientation Explains Aortic Valve Leaflet Coaptation

  • Peter E. Hammer
  • Christina A. Pacak
  • Robert D. Howe
  • Pedro J. del Nido
Part of the Lecture Notes in Computer Science book series (LNCS, volume 7945)

Abstract

The aortic valve owes its strength and durability to a network of collagen fibers within the leaflets. However, the pattern of these fibers and their role in valve function is not well understood. We imaged and quantified the macroscopically visible pattern of collagen fibers in seven porcine aortic valves with particular attention to measuring this pattern in the unstrained leaflet. We then used a structural finite element model of the aortic valve to study the effect of the observed collagen pattern on the configuration of the loaded valve. Results showed that collagen is oriented oblique to the free edge over much of the leaflet in its unstrained state, and simulations suggest that this architecture plays an important role by enabling adequate valve leaflet coaptation. Simulation results were validated by comparison with images of a porcine aortic valve under load.

Keywords

Aortic valve collagen simulation coaptation 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Augoustides, J.G., Szeto, W.Y., Bavaria, J.E.: Advances in aortic valve repair: focus on functional approach, clinical outcomes, and central role of echocardiography. J. Cardiothorac. Vasc. Anesth. 24, 1016–1020 (2010)CrossRefGoogle Scholar
  2. 2.
    De Hart, J., Peters, G.W.M., Schreurs, P.J.G., Baaijens, F.P.T.: Collagen fibers reduce stresses and stabilize motion of aortic valve leaflets during systole. J. Biomech. 37, 303–311 (2004)CrossRefGoogle Scholar
  3. 3.
    Sacks, M.S., Yoganathan, A.P.: Heart valve function: a biomechanical perspective. Philos. Trans. R. Soc. Lond. B. Biol. Sci. 362, 1369–1391 (2007)CrossRefGoogle Scholar
  4. 4.
    Sauren, A.A.H.J., Kuijpers, W., van Steenhoven, A.A., Veldpaus, F.E.: Aortic valve histology and its relation with mechanics—Preliminary report. J. Biomech. 13, 97–104 (1980)CrossRefGoogle Scholar
  5. 5.
    Hammer, P.E., Chen, P.C., del Nido, P.J., Howe, R.D.: Computational model of aortic valve surgical repair using grafted pericardium. J. Biomech. 45, 1199–1204 (2012)CrossRefGoogle Scholar
  6. 6.
    Köthe, U.: Edge and junction detection with an improved structure tensor. In: Michaelis, B., Krell, G. (eds.) DAGM 2003. LNCS, vol. 2781, pp. 25–32. Springer, Heidelberg (2003)CrossRefGoogle Scholar
  7. 7.
    Liu, Y., Kasyanov, V., Schoephoerster, R.T.: Effect of fiber orientation on the stress distribution within a leaflet of a polymer composite heart valve in the closed position. J. Biomech. 40, 1099–1106 (2007)CrossRefGoogle Scholar
  8. 8.
    Hammer, P.E., Howe, R.D., del Nido, P.J.: Lower transient stresses in an aortic valve leaflet with oblique reinforcement fibers: a finite element study. In: Proceedings of the ASME Summer Bioengineering Conf., Fajardo, PR, June 20-23 (2012)Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2013

Authors and Affiliations

  • Peter E. Hammer
    • 1
  • Christina A. Pacak
    • 2
  • Robert D. Howe
    • 3
  • Pedro J. del Nido
    • 1
  1. 1.Department of Cardiac SurgeryChildren’s Hospital BostonUSA
  2. 2.Department of AnesthesiaChildren’s Hospital BostonUSA
  3. 3.Harvard School of Engineering and Applied SciencesCambridgeUSA

Personalised recommendations