Abstract
This chapter shows both inverse and direct position analyses of several typical parallel mechanisms including a planar 5R type, a 2-DOF spherical type, two 3-DOF types, and a 6-RUS type. Since for the parallel mechanism, it is more convenient to employ the geometric method to solve its kinematics, the position analysis established upon writing geometric constraint equations for each leg is introduced. In particular, the position analysis of 3-[PP]S type of parallel mechanism in terms of a special orientation description is presented to simplify its kinematics.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Anco Engineers (2000) http://www.ancoengineers.com/Motion1.html. Accessed 20 Dec 2012
Bonev IA (2002) Geometric analysis of parallel mechanisms. Ph.D. thesis, Laval University, Quebec
Bonev IA, Gosselin CM (2000) A geometric algorithm for the computation of the constant-orientation workspace of 6-RUS parallel manipulators. In: Proceedings of the ASME design engineering technical conferences and computers and information in engineering conference, Baltimore, MD, DETC2000/MECH-14106, ASME press, New York
Chi YL (1999) Systems and methods employing a rotary track for machining and manufacturing. WIPO Patent, No. WO99/38646
Clavel R (1988) Delta: a fast robot with parallel geometry. In: Proceedings of the 18th international symposium on industrial robot, 26–28 April 1988, Lausanne, IFS Publications, Kempston, Bedford, UK, pp 91–100
Denavit J, Hartenberg RS (1955) A kinematic notation for lower pair mechanisms based on matrices. ASME J Appl Mech 22:215–221
Gosselin CM, Sefrioui J, Richard MJ (1994) On the direct kinematics of spherical three-degree-of-freedom parallel manipulators of general architecture. ASME J Mech Des 116(2):594–598
Huang Z, Yao YL (1999) A new closed-form kinematics of the generalized 3-dof spherical parallel manipulator. Robotica 17(5):475–485
Liu X-J, Bonev IA (2008) Orientation capability, error analysis, and dimensional optimization of two articulated tool heads with parallel kinematics. ASME J Manuf Sci Eng 130(1), Article Number: 011015
Liu X-J, Wang J, Pritschow G (2006) On the optimal kinematic design of the PRRRP 2-DOF parallel mechanism. Mech Mach Theory 41:1111–1130
Servos & Simulation (2000) http://www.servos.com/products/motion-platforms.html. Accessed 20 Dec 2012
Söylemez E (2002) Classical transmission-angle problem for slider-crank mechanisms. Mech Mach Theory 37:419–425
Takeda Y (2000) http://www.mech.titech.ac.jp/~mech0000_msd/en/?page=themes. Accessed 1 Feb 2013
Takeda Y, Funabashi H, Ichimaru H (1997) Development of spatial in-parallel actuated manipulators with six degrees of freedom with high motion transmissibility. JSME Int J Series C 40(2):299–308
Uchiyama M (2001) http://www.space.mech.tohoku.ac.jp/research/hexa/hexa.jpg. Accessed 20 Dec 2012
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Liu, XJ., Wang, J. (2014). Position Analysis of Parallel Mechanisms. In: Parallel Kinematics. Springer Tracts in Mechanical Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-36929-2_3
Download citation
DOI: https://doi.org/10.1007/978-3-642-36929-2_3
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-36928-5
Online ISBN: 978-3-642-36929-2
eBook Packages: EngineeringEngineering (R0)