Absract
Laser processing of metallic surfaces funds wide application in industry. Some of these applications include laser shock processing, laser gas assisted nitriding, and laser induced particle injection at the surfaces. Laser shock hardening is a potential candidate for surface treatment of metallic parts. This is because the high power laser beam processing, which efficiently supplies energy directly to a small region of any material while resulting in localized treatment without bulk heating of the substrate. Hence, the properties of the bulk material remain unaffected. In this chapter, practical applications of laser treatment of metallic surfaces are presented. The morphological and metallurgical changes in the treated layer are discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yilbas, B.S., Arif, A.F.M., Shuja, S.Z., Gondal, M.A., Shirokof, J.: Investigation into laser shock processing. ASM J. Mater. Eng. Perform. 13, 47–54 (2004)
Yilbas, B.S., Arif, A.F.M., Karatas, C., Abdul Aleem, B.J., Tabet, N.: Laser gas-assisted nitriding of steel: residual stress. Ind Lubr Tribol 62(4), 214–223 (2010)
Yilbas, B.S., Akhtar, S.S., Karatas, C.: Laser gas-assisted processing of carbon coated and TiC embedded Ti-6Al-4 V alloy surface. Appl. Surf. Sci. 257(2), 531–537 (2010)
Yilbas, B.S., Sahin, A., Davies, R.: Laser heating mechanism including evaporation process initiating the laser drilling. Int. J. Mach. Tools Manuf. 35(7), 1047–1062 (1995)
Yilbas, B.S., Sami, M.: Liquid ejection and possible nucleate boiling mechanisms in relation to laser drilling process. J. Phys. Part D: J. Appl. Phys. 30, 1996–2005 (1997)
Peyre, P., Fabbro, R., Berthe, L., Dubouchet, C.: Laser shock processing of materials, physical processes involved and examples of applications. J. Laser Appl. 8, 135–141 (1996)
Xiao, L.: Numerical computation of stress waves in solids. Akademie Verlag GmbH, Berlin (1996)
Smith, G.D.: Numerical solution of partial differential equations: finite difference methods, 3rd edn. Clarendon Press, Oxford (1985)
Gudonov, S.K.: A finite difference method for the numerical computation of discontinuous solutions of equations of fluid dynamics. Mat. Sb., pp. 271–306 (1959)
Ochoa, E.A., Figueroa, C.A., Alvarez, F.: Nitriding of AISI 4140 steel by a low energy broad ion source. J. Vac. Sci, Technol. A 24, 2113–2116 (2006)
Stokes, J., Looney, L.: Residual stress in HVOF thermally sprayed thick deposit. Surf. Coat. Technol. 177–178, 18–23 (2004)
Oliver, W.C., Pharr, G.M.: Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiment. J. Mater. Res. 7, 1564–1580 (1992)
Niihara, K., Morena, R., Hasselman, D.P.H.: Indentation fracture toughness of brittle materials for palmqvist crack. Fract. Mech. Ceram. 5, 97–105 (1983)
Li, H., Khor, K.A., Cheang, P.: Young’s modulus and fracture toughness determination of high velocity oxy-fuel-sprayed bioceramic coatings. Surf. Coat. Technol. 155, 21–32 (2002)
Mao, K., Sun, Y., Bell, T.: An initial approach to the link of multi-layer coatings contact stresses and the surface engineered gears. Surf. Coat. Technol. 201, 5796–5803 (2007)
Chu, J.P., Rigsbee, J.M., Banas, G., Elsayed-Ali, H.E.: Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel. Mater. Sci. Eng. 260A, 260–268 (1999)
Watkins, T.R., England, R.D., Klepser, C., Jayaraman, N.: Measurement and analysis of residual stresses in-phase iron nitride layers as a function of depth, International Center for Diffraction Data 2000. Adv. X-Ray Anal. 43, 31–38 (2000)
Pellizzari, M., Molinari, A., Straffelini, G.: Thermal fatigue resistance of gas and plasma nitrided 41CrAlMo7 steel. Mater. Sci. Eng., A 352, 186–194 (2003)
Xin, H., Hut, C., Baker, T.N.: Microstructural assessment of laser nitrided Ti-6Al-4V alloy. J. Mater. Sci. 35, 3373–3382 (2000)
Lackner, J.M., Waldhauser, W., Ebner, R., Bakker, R.J., Schoberl, T., Major, B.: Room temperature pulsed laser deposited (Ti, Al)CxN1-x coatings—chemical, structural, mechanical and tribological properties. Thin Solid Films 468, 125–133 (2004)
Hoche, D., Schikora, H., Zutz, H., Queitsch, R., Emmel, A., Schaaf, P.: Microstructure of TiN coatings synthesized by direct pulsed Nd:YAG laser nitriding of titanium: development of grain size, microstrain, and grain orientation. Appl. Phys. A 91, 305–314 (2008)
Razavi, R.S., Salehi, M., Monirvaghefi, M., Mozafarinia, R.: Effect of laser gas nitriding on the microstructure and corrosion properties of Ti-6Al-4V alloy. ISIJ Int. 47, 709–714 (2007)
Biswas, A., Li, L., Chatterjee, U.K., Manna, I., Dutta Majumdar, J.: Diode laser assisted surface nitriding of Ti-6Al-4V: properties of the nitrided surface. Metall. Mater. Trans. A 40A, 3031–3037 (2009)
Yilbas, B.S., Karatas, C., Uslan, I., Keles, O., Usta, I.Y., Ahsan, M.: CO2 laser gas assisted nitriding of Ti-6Al-4V alloy. Appl. Surf. Sci. 252, 8557–8564 (2006)
Yilbas, B.S., Nickel, J., Coban, A., Sami, M., Shuja, S.Z., Aleem, A.: Laser melting of plasma nitrided Ti-6Al-4V alloy. Wear 212, 140–149 (1997)
Fouquet, V., Pichon, L., Drouet, M., Straboni, A.: Plasma assisted nitridation of Ti-6Al-4V. Appl. Surf. Sci. 221, 248–258 (2004)
Yilbas, B.S., Arif, A.F.M., Karatas, C.: Laser gas-assisted nitriding of Ti-6Al-4V alloy and residual stress analysis. Surf. Eng. 25, 228–234 (2009)
Gobel, T., Menzel, S., Hecker, M., Bruckner, W., Wetzig, K., Genzel, C.: Stress measurements in thermal loaded (Ti, Al)N hard coatings. Surf. Coat. Technol. 142–144, 861–867 (2001)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Yilbas, B.S., Shuja, S.Z. (2013). Practical Applications of Laser Surface Treatment. In: Laser Surface Processing and Model Studies. Materials Forming, Machining and Tribology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-36629-1_6
Download citation
DOI: https://doi.org/10.1007/978-3-642-36629-1_6
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-36628-4
Online ISBN: 978-3-642-36629-1
eBook Packages: EngineeringEngineering (R0)